Achieving High Performances of Ultra-Low Thermal Expansion and High Thermal Conductivity in 0.5PbTiO3-0.5(Bi0.9La0.1)FeO3@Cu Core–Shell Composite

2020 ◽  
Vol 12 (51) ◽  
pp. 57228-57234
Author(s):  
Yongqiang Qiao ◽  
Ning Xiao ◽  
Yuzhu Song ◽  
Shiqing Deng ◽  
Rongjin Huang ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Thermal Expansion ◽  
High Thermal Conductivity ◽  
Core Shell ◽  
Low Thermal Expansion ◽  
Shell Composite

Description of the PM Process by Using Ishikawa-Analysis

2013 ◽  
Vol 752 ◽  
pp. 48-56
Author(s):  
Andrea Simon ◽  
Károly Kovács ◽  
C. Hakan Gür ◽  
Tadeusz Pieczonka ◽  
Zoltán Gácsi
Keyword(s):  
Thermal Conductivity ◽  
Thermal Expansion ◽  
Powder Metallurgy ◽  
Thermal Expansion Coefficient ◽  
Expansion Coefficient ◽  
High Strength ◽  
Manufacturing Technology ◽  
Low Density ◽  
Composite Manufacturing ◽  
Low Thermal Expansion

Composites are special material which can provide individual properties such as high strength with low density or good thermal conductivity with low thermal expansion coefficient. Composites conform to the constantly evolving and more complex expectations. In order to make a product with good quality, it is important to choose suitable materials and technology. In this research powder metallurgy (PM), as one of the most common composite manufacturing technology, was examined -which factors and mechanisms influence mostly the properties of the product. Ishikawa method was used to reveal these correlations.

Aluminum-Matrix Aluminum Nitride Particle Composite as a Low-Thermal-Expansion Thermal Conductor

1993 ◽  
Vol 323 ◽  
Author(s):  
Shy-Wen Lai ◽  
D. D. L. Chung
Keyword(s):  
Thermal Conductivity ◽  
Tensile Strength ◽  
Thermal Expansion ◽  
Volume Fraction ◽  
Liquid Aluminum ◽  
Aluminum Matrix ◽  
Aluminum Matrix Composites ◽  
Matrix Composites ◽  
Low Thermal Expansion ◽  
Increasing Temperature

AbstractAluminum-matrix composites containing AIN or SiC particles were fabricated by vacuum infiltration of liquid aluminum into a porous particulate preform under an argon pressure of up to 41 MPa. Al/AIN was superior to Al/SiC in thermal conductivity. At 59 vol.% AIN, Al/AlN had a thermal conductivity of 157 W/m. °C and a thermal expansion coefficient of 9.8 × 10−-6°C−1 (35–100 °C). Al/AlN had similar tensile strength and higher ductility compared to Al/SiC of a similar reinforcement volume fraction at room temperature, but exhibited higher tensile strength and higher ductility at 300–400°C. The ductility of Al/AlN increased with increasing temperature from 22 to 400°C, while that of Al/SiC did not change with temperature. The superior high temperature resistance of Al/AlN is attributed to the lack of a reaction between Al and AIN, in contrast to the reaction between Al and SiC in AI/SiC.

scholarly journals Recent Progress in the Study of Thermal Properties and Tribological Behaviors of Hexagonal Boron Nitride-Reinforced Composites

2020 ◽  
Vol 4 (3) ◽  
pp. 116
Author(s):  
Maryam Khalaj ◽  
Sanaz Zarabi Golkhatmi ◽  
Sayed Ali Ahmad Alem ◽  
Kahila Baghchesaraee ◽  
Mahdi Hasanzadeh Azar ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Boron Nitride ◽  
Recent Progress ◽  
Phonon Scattering ◽  
Hexagonal Boron Nitride ◽  
High Thermal Conductivity ◽  
Promising Candidate ◽  
Reinforced Composite ◽  
Low Thermal Expansion ◽  
Wide Range

Ever-increasing significance of composite materials with high thermal conductivity, low thermal expansion coefficient and high optical bandgap over the last decade, have proved their indispensable roles in a wide range of applications. Hexagonal boron nitride (h-BN), a layered material having a high thermal conductivity along the planes and the band gap of 5.9 eV, has always been a promising candidate to provide superior heat transfer with minimal phonon scattering through the system. Hence, extensive researches have been devoted to improving the thermal conductivity of different matrices by using h-BN fillers. Apart from that, lubrication property of h-BN has also been extensively researched, demonstrating the effectivity of this layered structure in reduction of friction coefficient, increasing wear resistance and cost-effectivity of the process. Herein, an in-depth discussion of thermal and tribological properties of the reinforced composite by h-BN will be provided, focusing on the recent progress and future trends.

Sign in / Sign up

Export Citation Format

Share Document