Interfacial Effect of Oxygen-Doped Nanodiamond on CuO and Micropyramidal Silicon Heterostructures for Efficient Nonenzymatic Glucose Sensor

2018 ◽  
Vol 1 (5) ◽  
pp. 1579-1586 ◽  
Author(s):  
Bohr-Ran Huang ◽  
Meng-Jiy Wang ◽  
Deepa Kathiravan ◽  
Alfin Kurniawan ◽  
Hong-Hui Zhang ◽  
...  
Keyword(s):  
Glucose Sensor ◽  
Interfacial Effect ◽  
Nonenzymatic Glucose Sensor ◽  
Effect Of Oxygen ◽  
Silicon Heterostructures

Nonenzymatic glucose sensor based on over-oxidized polypyrrole modified Pd/Si microchannel plate electrode

2011 ◽  
Vol 26 (5) ◽  
pp. 2579-2584 ◽  
Author(s):  
Jing Shi ◽  
Pengliang Ci ◽  
Fei Wang ◽  
Hui Peng ◽  
Pingxiong Yang ◽  
...  
Keyword(s):  
Glucose Sensor ◽  
Microchannel Plate ◽  
Plate Electrode ◽  
Nonenzymatic Glucose Sensor

One-step synthesis of novel Cu@polymer nanocomposites through a self-activated route and their application as nonenzymatic glucose sensors

2017 ◽  
Vol 46 (30) ◽  
pp. 9918-9924 ◽  
Author(s):  
Yinlin Tong ◽  
Jiaying Xu ◽  
Hong Jiang ◽  
Feng Gao ◽  
Qingyi Lu
Keyword(s):  
Polymer Nanocomposites ◽  
Glucose Sensor ◽  
Glucose Sensors ◽  
Core Shell ◽  
Nonenzymatic Glucose Sensor ◽  
One Step

Novel core–shell Cu@polymer nanocomposites were synthesized through a one-step self-activated route and developed as nonenzymatic glucose sensor.

scholarly journals Electrochemical Preparation of Polyaniline- Supported Cu-CuO Core-Shell on 316L Stainless Steel Electrodes for Nonenzymatic Glucose Sensor

2020 ◽  
Vol 2020 ◽  
pp. 1-7 ◽  
Author(s):  
Hai V. Le ◽  
Quang T. Le
Keyword(s):  
Stainless Steel ◽  
Shell Structure ◽  
316L Stainless Steel ◽  
Glucose Sensor ◽  
Pani Film ◽  
Core Shell ◽  
Steel Electrode ◽  
Electrochemical Preparation ◽  
Nonenzymatic Glucose Sensor ◽  
Core Shell Structure

In this article, we reported the elaboration of a nonenzymatic glucose sensor based on the polyaniline-supported Cu-CuO core-shell structure prepared on the 316L stainless steel electrode by electrochemical methods. In the first step, polyaniline (PANI) film was electrodeposited on the 316L substrate from a solution of 0.1 M aniline and 0.5 M sulfuric acid in absolute ethanol by the cyclic voltammetry (CV) method. In the second step, the copper particles were electrodeposited on the PANI film from CuCl2·2H2O 0.01 M precursor prepared in a KCl 0.1 M solution by the CV method. In the third step, Cu particles were partially oxidized to CuO by the CV method in a NaOH 0.1 M electrolyte to form a Cu-CuO core-shell structure supported on the PANI film. The as-prepared electrode (Cu-CuO/PANI/316L) was used to detect glucose in a NaOH 0.1 M solution. The Cu-CuO/PANI/316L sensor exhibited a linear range of 0.1–5 mM (R2 = 0.995) with a detection limit of 0.1 mM (S/N = 3) and high sensitivity of (25.71 mA·mM−1·cm−2). In addition, no significant interference was observed from sucrose, maltose, lactose, and ascorbic acid. The results showed that the polyaniline-supported Cu-CuO core-shell structure has the potential to be applied as an electrode material for the nonenzymatic glucose sensor.

scholarly journals Unique Nonenzymatic Glucose Sensor Using a Hollow-Shelled Triple Oxide Mn–Cu–Al Nanocomposite

ACS Omega ◽  
2020 ◽  
Vol 5 (37) ◽  
pp. 23502-23509
Author(s):  
Nivedhini Iswarya Chandrasekaran ◽  
Manickam Matheswaran
Keyword(s):  
Glucose Sensor ◽  
Nonenzymatic Glucose Sensor

Cuprous Oxide Films with Hollow Cubic Cage Structure for Nonenzymatic Glucose Detection

NANO ◽  
2019 ◽  
Vol 14 (04) ◽  
pp. 1950045
Author(s):  
Fang Sun ◽  
Lehong Xing ◽  
Xihui Yang ◽  
Hailiang Huang ◽  
Lina Ning
Keyword(s):  
Electrode Materials ◽  
Glucose Sensor ◽  
High Sensitivity ◽  
Fast Response ◽  
Glucose Sensing ◽  
Glucose Sensors ◽  
Cage Structure ◽  
Active Materials ◽  
Nonenzymatic Glucose Sensor ◽  
Step Procedure

In this study, CuO films with hollow cubic cages were prepared by a facile two-step procedure consisting of electrodeposition synthesis and subsequent direct calcination. First, Cu2O nanocubes were fabricated on ITO substrate through a simple electrodeposition procedure. Then, Cu2O nanocubes were converted to CuO hollow cubic cages without obvious morphological change through direct calcination. The obtained CuO cubic cages serving as active materials illustrated a favorable performance for nonenzymatic glucose sensing with high sensitivity of [Formula: see text]A[Formula: see text]mM[Formula: see text][Formula: see text]cm[Formula: see text] at a low applied potential of 0.50[Formula: see text]V, fast-response time (less than 3[Formula: see text]s), low detection limit of 1.0[Formula: see text][Formula: see text]M and wide linear range up from 2.0[Formula: see text][Formula: see text]M to 1.0[Formula: see text]mM ([Formula: see text]). Moreover, the good selectivity of the CuO cubic cages-based nonenzymatic glucose sensor against electroactive compounds such as ascorbic acid, uric acid and dopamine were also demonstrated. These good features indicate that the as-prepared CuO cubic cages can be used as promising electrode materials, which have a great potential in the development of sensitive and selective nonenzymatic glucose sensors.

Sign in / Sign up

Export Citation Format

Share Document