Extensional Flows of Solutions of Entangled Polymers Confirm Reduction of Friction Coefficient

2015 ◽  
Vol 48 (17) ◽  
pp. 6306-6312 ◽  
Author(s):  
Giovanni Ianniruberto
Keyword(s):  
Friction Coefficient ◽  
Entangled Polymers ◽  
Extensional Flows

Unraveling Dynamics of Entangled Polymers in Strong Extensional Flows

2019 ◽  
Vol 52 (3) ◽  
pp. 1296-1307 ◽  
Author(s):  
Soroush Moghadam ◽  
Indranil Saha Dalal ◽  
Ronald G. Larson
Keyword(s):  
Entangled Polymers ◽  
Extensional Flows

Microstructure and Friction of Ion Beam Induced Amorphous Ti-Pd Alloys

1985 ◽  
Vol 55 ◽  
Author(s):  
J-P. Hirvonen ◽  
M. Nastasi ◽  
J. R. Phillips ◽  
J. W. Mayer
Keyword(s):  
Solid Solution ◽  
Friction Coefficient ◽  
Composition Range ◽  
Ion Beam ◽  
Amorphous Region ◽  
Transmission Electron ◽  
Solid Solution Region ◽  
Friction Measurements ◽  
Solution Region ◽  
High Equilibrium

ABSTRACTMultilayered samples of Ti-Pd with linearly varying compositions were irradiated by Xe ions at 600 keV. The induced microstructures were studied by using transmission electron microscopy and Rutherford backscattering. Mixing was found to be complete over the entire composition range, resulting in amorphous or amorphous plus crystalline structures except at the palladium-rich end, where a crystalline Pd-Ti solid solution was obtained. This is consistent with the high equilibrium solubility of Ti in Pd. In addition, significant coarsening of the microstructure caused by irradiation was found in this solid solution region.Friction measurements were carried out in air and water by using a polytetrafluoroethylene pin as a counterpart. In air the friction coefficient was independent of composition and microstructure after about 2000 passes. In water, however, after 600 passes the friction coefficient reached a steady-state value with a pronounced minimum over the amorphous region. This property was unchanged throughout the remaining 10000 passes.

A Quantitative Theory for the Computation of Tire Friction Under Severe Conditions of Sliding

1986 ◽  
Vol 14 (1) ◽  
pp. 44-72 ◽  
Author(s):  
C. M. Mc C. Ettles
Keyword(s):  
Friction Coefficient ◽  
Flash Temperature ◽  
Contact Conditions ◽  
Quantitative Form ◽  
Heating Effects ◽  
Rubber Friction ◽  
Viscoelastic Effects ◽  
Tire Friction ◽  
Pavement Friction ◽  
Metal Polymer

Abstract It is proposed that tire-pavement friction is controlled by thermal rather than by hysteresis and viscoelastic effects. A numerical model of heating effects in sliding is described in which the friction coefficient emerges as a dependent variable. The overall results of the model can be expressed in a closed form using Blok's flash temperature theory. This allows the factors controlling rubber friction to be recognized directly. The model can be applied in quantitative form to metal-polymer-ice contacts. Several examples of correlation are given. The difficulties of characterizing the contact conditions in tire-pavement friction reduce the model to qualitative form. Each of the governing parameters is examined in detail. The attainment of higher friction by small, discrete particles of aluminum filler is discussed.

Sign in / Sign up

Export Citation Format

Share Document