Germination biology of four climatically varied populations of the invasive species African lovegrass (Eragrostis curvula)

Weed Science ◽  
2021 ◽  
pp. 1-9
Author(s):  
Jason Roberts ◽  
Singarayer Florentine ◽  
Eddie van Etten ◽  
Christopher Turville
Keyword(s):  
Invasive Species ◽  
Environmental Factors ◽  
Perennial Grass ◽  
Complete Darkness ◽  
Eragrostis Curvula ◽  
Wide Range ◽  
The Mean ◽  
Global Biodiversity ◽  
Alternating Temperature ◽  
Selection Of

Abstract African lovegrass [Eragrostis curvula (Schrad.) Nees] is a highly invasive C4 perennial grass that threatens global biodiversity. Appropriate management of this species has been hampered by a lack of knowledge concerning its seed ecology, resulting in significant economic and environmental impacts within various environments. Consequently, this study explored the effects of a selection of environmental factors (photoperiod, alternating temperature, pH, and salinity) by analyzing several measures of germination on four geographically distinct populations of E. curvula to assist in its extirpation from infested sites. Seeds were collected in Australia from Maffra and Shepparton, VIC; Tenterfield, NSW; and Midvale, WA. Key results showed that seeds from Maffra (54% vs. 79%), Tenterfield (38% vs. 61%), and Shepparton (34% vs. 71%) had significantly reduced germination in complete darkness compared with an alternating 12-h light and 12-h dark photoperiod, whereas Midvale had consistent germination (91% vs. 99%). Temperatures between 17/7 C reduced germination for Maffra (42% vs. 73%), Tenterfield (34% vs. 55%), and Shepparton (33% vs. 59%) compared with the mean of all other temperature combinations, whereas Midvale had consistent germination. Furthermore, germination for all populations was consistent between pH 4 and 9. For salinity, germination was significantly reduced at ≥100 mM for Maffra (29% vs. 67%), ≥150 mM for Tenterfield (29% vs. 94%) and Shepparton (39.5% vs. 81.5%), and 250 mM for Midvale (39% vs. 82%) compared with the mean of all other concentrations. Although each trial was conducted independently, the data can be used to generate species-targeted management. Such strategies include maintaining high levels of quarantine and hygiene programs to avoid future spread; where practical, applying light-limiting strategies (mulching, tilling, or scraping) for the Maffra, Tenterfield, and Shepparton populations; and maintaining management efforts year-round, as the species can germinate under a wide range of conditions.

THE CUT-OFF POINT IN SUB-CLINICAL OBSESSIVE-COMPULSIVE RESEARCH

2000 ◽  
Vol 28 (3) ◽  
pp. 225-233 ◽  
Author(s):  
David Mataix-Cols ◽  
Julio Vallejo ◽  
Miquel Sànchez-Turet
Keyword(s):  
Selection Criteria ◽  
Methodological Issue ◽  
Theoretical Models ◽  
Control Group ◽  
Personality Measures ◽  
Obsessive Compulsive ◽  
Compulsive Disorder ◽  
Wide Range ◽  
The Mean ◽  
Selection Of

The question of which cut-off point would be more appropriate in the selection of sub-clinical obsessive-compulsive (OC) samples is an important methodological issue that has not been formally addressed, hence prompting the current study. Three groups of sub-clinical OC subjects, scoring 1, 1.5, and 2 standard deviations (SD) above the mean on the Padua Inventory, and a matched non-OC control group, were compared on various clinical and personality measures. As expected, the three sub-clinical groups had higher scores than the non-OC group on measures of OC symptoms (including obsessional slowness), depression, anxiety, and on personality measures of neuroticism, psychoticism, and obsessional traits. However, no significant differences were observed between the three sub-clinical groups on most measures, although the 2 SD group had higher scores on neuroticism and obsessional personality traits. It is concluded that a wide range of selection criteria can yield similar results that are interpretable within the current theoretical models of Obsessive-Compulsive Disorder (OCD). It is suggested that subjects with a diagnosis of OCD should be carefully excluded from sub-clinical studies. [A Spanish abstract follows the references.]

scholarly journals Dosimetry of Critical Organs in Maxillofacial Imaging with Cone-beam Computed Tomography

2019 ◽  
Vol 9 (1Feb) ◽  
Author(s):  
R Ghanbarnezhad Farshi ◽  
A Mesbahi ◽  
M Johari ◽  
Ü Kara ◽  
N Gharehaghaji
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Cone Beam ◽  
Radiation Doses ◽  
Parotid Glands ◽  
Thermoluminescent Dosimeters ◽  
Wide Range ◽  
Significant Difference ◽  
The Mean ◽  
Selection Of

Background: While the benefits of cone-beam computed tomography (CBCT) are well known in maxillofacial imaging, the use of this modality is not risk-free.Objective: The aim of this study was to evaluate the exposure doses received by patients during maxillofacial imaging with CBCT.Methods: Entrance surface dose (ESD) was measured by using thermoluminescent dosimeters (TLDs) attached to the eyes lids, parotid glands and thyroid of 64 patients in two imaging centers (A and B). Phantom dosimetry was performed by a cylindrical poly-methyl methacrylate (PMMA) head-size phantom and an ionization chamber for different exposure parameters. NewTom VGi and Planmeca Promax 3D CBCT scanners were used at centers A and B, respectively.Results: The mean ESD of the eyes, parotid glands and thyroid were 2.57, 2.33 and 0.28 mGy in center A, 0.35, 2.11 and 0.37 mGy in center B, respectively. ESD of the eyes revealed a significant difference in two centers; in center B, it was 86.4% lower than center A. In the phantom dosimetry, the measured doses of NewTom VGi were 2.63 and 2.08 mGy, respectively by changing field of view (FOV) size from 8×8 cm2 (height × diameter) to 6×6 cm2. For Planmeca Promax 3D, it ranged from 0.98 to 3.24 mGy depending on exposure parameters.Conclusion: There is a wide range of radiation doses dependent on the units, patients and selected scan parameters. Inappropriate selection of exposure settings, especially FOV size, can seriously increase patient dose.

scholarly journals Germination ecology of wild onion: a rainfed crop weed

2014 ◽  
Vol 32 (1) ◽  
pp. 69-80 ◽  
Author(s):  
A. Tanveer ◽  
M. Sibtain ◽  
M.M. Javaid ◽  
H.H. Ali
Keyword(s):  
Environmental Factors ◽  
Osmotic Stress ◽  
Constant Temperature ◽  
Soil Surface ◽  
Burial Depth ◽  
Distilled Water ◽  
Complete Darkness ◽  
Wide Range ◽  
Significant Difference ◽  
Nacl Concentration

Asphodelus tenuifolius is becoming a more common weed in rain-fed area in Pakistan. Laboratory and greenhouse experiments were conducted to determine the effect of different environmental factors on germination and emergence of A.tenuifolius. Results showed that A.tenuifolius can tolerate a wide range of varying environmental factors. Greatest percentage of germination (80%) was recorded at 15 ºC constant temperature; however, considerable germination occurred at 20 and 25 ºC. Light for 10 h photoperiod stimulate germination of Asphodelus tenuifolius compared with complete darkness. Germination was totally inhibited at osmotic stress higher than -0.8 MPa. There was no significant difference in germination at pH 6 to 8; however, there was a slightly decrease at pH 9, compared with distilled water. Asphodelus tenuifolius was very sensitive to salinity; however, a few seeds of A.tenuifolius were able to germinate even at 150 mM NaCl concentration. Greatest emergence occurred with seed placed at soil surface and emergence decreased with increase in burial depth. No emergence occurred from 4 cm or greater. This information may aid in developing tools and strategies for management.

The use of chromium oxide to estimate the faecal output of Merinos

1963 ◽  
Vol 14 (2) ◽  
pp. 239 ◽  
Author(s):  
LJ Lambourne ◽  
TF Reardon
Keyword(s):  
Chromium Oxide ◽  
Grab Sampling ◽  
Low Concentrations ◽  
Wide Range ◽  
Main Series ◽  
Series Of Experiments ◽  
The Mean ◽  
High Concentrations ◽  
Fixed Times ◽  
Selection Of

The pattern of chromium oxide (Cr2O3) excretion was studied in Merino wethers. The sheep were dosed twice daily with Cr2O3 at fixed times. In the main series of experiments, sheep were fed fresh herbage in metabolism pens. An oaten chaff diet was also employed. In all cases a diurnal pattern of Cr2O3 excretion in the faeces was observed. The pattern was not consistent from day to day, nor was there any consistent effect of level of intake or feeding frequency on the excretion pattern. Distributions of Cr2O3 were examined in eight grazing sheep killed ½–4 hr after dosing. In six of the animals high concentrations of the marker were found to be mixed with the reticuloruminal ingesta, while low concentrations were observed in the other stomachs. In the remaining two animals high concentrations were observed in the omasum and abomasum, from which it was inferred that the dose had by-passed the main bulk of the reticulorurninal ingesia. It seems unlikely that any real advantage is to be gained by painstaking selection of particular times for dosing and faeces sampling in different environments; and it is suggested that convenient fixed times — say 6 a.m. and 3 p.m., or 9 a.m. and 5 p.m. — should prove satisfactory in estimating output of faeces of grazing animals under a wide range of conditions. In 40 sheep-periods of 10–14 days, the mean daily output of faeces organic matter by pen-fed wethers was estimated with mean 101% and error ±12% of the true figures, by analysis of a single bulked sample obtained by dosing and grab sampling at about 9 a.m. and 5 p.m. daily. In 40 periods when samples were bulked over 5–7 days the average estimate was 102 ± 14% of the true figure. Comparison under extensive grazing conditions showed that estimates obtained by dosing and sampling only once per day were generally some 15% higher than those obtained by dosing and sampling twice daily.

scholarly journals Effects of Light, Temperature, and Soil Depth on the Germination and Emergence of Conyza canadensis (L.) Cronq.

Agronomy ◽  
2019 ◽  
Vol 9 (9) ◽  
pp. 533 ◽  
Author(s):  
Daniele Ottavini ◽  
Euro Pannacci ◽  
Andrea Onofri ◽  
Francesco Tei ◽  
Peter Kryger Jensen
Keyword(s):  
Invasive Species ◽  
Soil Depth ◽  
Global Climate ◽  
Conyza Canadensis ◽  
Base Temperature ◽  
Complete Darkness ◽  
Water Imbibition ◽  
Ceiling Temperature ◽  
Wide Range ◽  
Pre Treatment

Understanding the dynamics of invasive species under global climate change requires knowledge about the effects of environmental factors on germination and emergence. We considered Conyza canadensis (L.) Cronq., an invasive species that is quickly invading Southern European agricultural systems, and performed germination assays in growth chambers at eight constant temperatures with alternating light (2.5, 5, 10, 15, 20, 25, 30, and 40 °C, with 12 h/12 h—light/dark), three alternating temperatures in alternating light (12/18, 17/23, and 22/28 °C, with 12 h/12 h—light/dark) and three fixed temperatures (15, 20, and 25 °C) in complete darkness. Furthermore, emergence assays were performed in pots considering four depths (0, 2.5, 5, and 10 mm), three temperatures with alternating light (15, 20, and 25 °C) and un-treated or pre-treated seeds (water imbibition and light for two days). C. canadensis was able to germinate in a wide range of temperatures (from 5–10 °C to 30 °C). The highest germination capacity was observed at 15 °C (light/dark); no differences were observed at 17/23 and 22/28 °C with respect to 20 and 25 °C (light/dark), while germinations were significantly reduced at 12/18 °C. The lowest germination time was observed at 25 °C (light/dark) and it was significantly increased at 12/18 °C and in darkness. The highest emergence was from 0 mm depth; pre-treatment significantly increased the emergence from 2.5 mm and 5 mm depth, but not from 10 mm depth. Modeling germination rates as a function of temperature allowed us to determine Tb = 6.8 °C (base temperature) and Tc = 35.8 °C (ceiling temperature). In light of these results, the potential for C. canadensis to spread into new environments and possible new management methods are discussed.

COMBINATORIAL POLYNOMIALLY COMPUTABLE CHARACTERISTICS OF SUBSTITUTIONS AND THEIR PROPERTIES

2020 ◽  
Vol 7 (2) ◽  
pp. 34-41
Author(s):  
VLADIMIR NIKONOV ◽  
◽  
ANTON ZOBOV ◽  
Keyword(s):  
Mathematical Expectation ◽  
Point Of View ◽  
Small Range ◽  
Computational Point ◽  
Wide Range ◽  
Bijective Function ◽  
The Difference ◽  
Element Base ◽  
Selection Of

The construction and selection of a suitable bijective function, that is, substitution, is now becoming an important applied task, particularly for building block encryption systems. Many articles have suggested using different approaches to determining the quality of substitution, but most of them are highly computationally complex. The solution of this problem will significantly expand the range of methods for constructing and analyzing scheme in information protection systems. The purpose of research is to find easily measurable characteristics of substitutions, allowing to evaluate their quality, and also measures of the proximity of a particular substitutions to a random one, or its distance from it. For this purpose, several characteristics were proposed in this work: difference and polynomial, and their mathematical expectation was found, as well as variance for the difference characteristic. This allows us to make a conclusion about its quality by comparing the result of calculating the characteristic for a particular substitution with the calculated mathematical expectation. From a computational point of view, the thesises of the article are of exceptional interest due to the simplicity of the algorithm for quantifying the quality of bijective function substitutions. By its nature, the operation of calculating the difference characteristic carries out a simple summation of integer terms in a fixed and small range. Such an operation, both in the modern and in the prospective element base, is embedded in the logic of a wide range of functional elements, especially when implementing computational actions in the optical range, or on other carriers related to the field of nanotechnology.

A Comparison of Physiological Demand between Self-Propelled and Motorized Treadmill Exercise

2018 ◽  
Vol 7 (4) ◽  
pp. 13-21
Author(s):  
Todd Backes ◽  
Charlene Takacs
Keyword(s):  
Respiratory Exchange Ratio ◽  
Treadmill Exercise ◽  
Cardiopulmonary Exercise Testing ◽  
Mean Value ◽  
The Self ◽  
Mixing Chamber ◽  
Wide Range ◽  
The Subject ◽  
The Mean ◽  
Computer Controlled

There are a wide range of options for individuals to choose from in order to engage in aerobic exercise; from outdoor running to computer controlled and self-propelled treadmills. Recently, self-propelled treadmills have increased in popularity and provide an alternative to a motorized treadmill. Twenty subjects (10 men, 10 women) ranging in age from 19-23 with a mean of 20.4 ± 0.8 SD were participants in this study. The subjects visited the laboratory on three occasions. The purpose of the first visit was to familiarize the subject with the self-propelled treadmill (Woodway Curve 3.0). The second visit, subjects were instructed to run on the self-propelled treadmill for 3km at a self-determined pace. Speed data were collected directly from the self-propelled treadmill. The third visit used speed data collected during the self-propelled treadmill run to create an identically paced 3km run for the subjects to perform on a motorized treadmill (COSMED T150). During both the second and third visit, oxygen consumption (VO2) and respiratory exchange ratio (R) data were collected with COSMED’s Quark cardiopulmonary exercise testing (CPET) metabolic mixing chamber system. The VO2 mean value for the self-propelled treadmill (44.90 ± 1.65 SE ml/kg/min) was significantly greater than the motorized treadmill (34.38 ± 1.39 SE ml/kg/min). The mean R value for the self-propelled treadmill (0.91 ± 0.01 SE) was significantly greater than the motorized treadmill (0.86 ± 0.01 SE). Our study demonstrated that a 3km run on a self-propelled treadmill does elicit a greater physiological response than a 3km run at on a standard motorized treadmill. Self-propelled treadmills provide a mode of exercise that offers increased training loads and should be considered as an alternative to motorized treadmills.

The way of value of Correlation of genomic DNA microsatellite loci and live weight of Chukchi reindeer

2020 ◽  
pp. 27-32
Author(s):  
V. Dodokhov ◽  
N. Pavlova ◽  
T. Rumyantseva ◽  
L. Kalashnikova
Keyword(s):  
Microsatellite Markers ◽  
Agricultural Production ◽  
Live Weight ◽  
Biodiversity Loss ◽  
Tribal Community ◽  
High Germination ◽  
Wide Range ◽  
The Mean ◽  
High Level ◽  
Dna Microsatellite

The article presents the genetic characteristic of the Chukchi reindeer breed. The object of the study was of the Chukchi reindeer. In recent years, the number of reindeer of the Chukchi breed has declined sharply. Reduced reindeer numbers could lead to biodiversity loss. The Chukchi breed of deer has good meat qualities, has high germination viability and is adapted in adverse tundra conditions of Yakutia. Herding of the Chukchi breed of deer in Yakutia are engaged only in the Nizhnekolymsky district. There are four generic communities and the largest of which is the agricultural production cooperative of nomadic tribal community «Turvaurgin», which was chosen to assess the genetic processes of breed using microsatellite markers: Rt6, BMS1788, Rt 30, Rt1, Rt9, FCB193, Rt7, BMS745, C 143, Rt24, OheQ, C217, C32, NVHRT16, T40, C276. It was found that microsatellite markers have a wide range of alleles and generally have a high informative value for identifying of genetic differences between animals and groups of animal. The number of identified alleles is one of the indicators of the genetic diversity of the population. The total number of detected alleles was 127. The Chukchi breed of deer is characterized by a high level of heterozygosity, and the random crossing system prevails over inbreeding in the population. On average, there were 7.9 alleles (Na) per locus, and the mean number of effective alleles (Ne) was 4.1. The index of fixation averaged 0.001. The polymorphism index (PIC) ranged from 0.217 to 0.946, with an average of 0.695.

Der Sommer und Herbst 2003 aus phänologischer Sicht | Summer and autumn 2003 from a phenological point of view

2004 ◽  
Vol 155 (5) ◽  
pp. 142-145 ◽  
Author(s):  
Claudio Defila
Keyword(s):  
Time Series ◽  
New Record ◽  
Point Of View ◽  
Late Spring ◽  
Mean Deviation ◽  
Leaf Shedding ◽  
The Mean ◽  
Very High ◽  
Selection Of

The record-breaking heatwave of 2003 also had an impact on the vegetation in Switzerland. To examine its influences seven phenological late spring and summer phases were evaluated together with six phases in the autumn from a selection of stations. 30% of the 122 chosen phenological time series in late spring and summer phases set a new record (earliest arrival). The proportion of very early arrivals is very high and the mean deviation from the norm is between 10 and 20 days. The situation was less extreme in autumn, where 20% of the 103 time series chosen set a new record. The majority of the phenological arrivals were found in the class «normal» but the class«very early» is still well represented. The mean precocity lies between five and twenty days. As far as the leaf shedding of the beech is concerned, there was even a slight delay of around six days. The evaluation serves to show that the heatwave of 2003 strongly influenced the phenological events of summer and spring.

Caracterização da Peneira Média em Clones de Coffea canephora

REVISTA FIMCA ◽  
2018 ◽  
Vol 5 (2) ◽  
pp. 28-31
Author(s):  
Darlan Darlan Sanches Barbosa Alves ◽  
Victor Mouzinho Spinelli ◽  
Marcos Santana Moraes ◽  
Carolina Augusto De Souza ◽  
Rodrigo da Silva Ribeiro ◽  
...  
Keyword(s):  
Genetic Improvement ◽  
Block Design ◽  
Coffea Canephora ◽  
Coffee Production ◽  
Randomized Block Design ◽  
Significant Difference ◽  
The Mean ◽  
Four Blocks ◽  
Selection Of

Introdução: O estado de Rondônia se destaca como tradicional produtor de café, sendo o segundo maior produtor brasileiro de C. canephora. No melhoramento genético de C. canephora, a seleção de plantas de elevada peneira média está associada à bebida de qualidade superior. Objetivos: O objetivo desse estudo foi avaliar a variabilidade genética de clones de C. canephora para o tamanho dos grãos, mensurado a partir da avaliação da peneira média (PM). Materiais e Métodos: Para isso, foi conduzido ao longo de dois anos agrícolas experimento no campo experimental da Embrapa no município de Ouro Preto do Oeste-RO, para a avaliação da peneira média de 130 genótipos (clones) com características das variedades botânicas Conilon, Robusta e híbridos intervarietais. O delineamento experimental utilizado foi de blocos ao acaso, com quatro repetições de quatro plantas por parcela. Resultados: Não houve resultados significativos para a interação clones X anos, indicando uma maior consistência no comportamento das plantas ao longo do tempo. Porém foram observadas diferenças significativas para o tamanho dos grãos entre os genótipos avaliados, possibilitando selecionar genótipos superiores. Conclusão: Os genótipos agruparam-se em cinco classes de acordo com o teste de média, subsidiando a caracterização de um gradiente de variabilidade da característica avaliada ABSTRACTIntroduction: Coffea canephora accounts for approximately 35% of the world's coffee production. The state of Rondônia stands out as a traditional coffee producer, being the second largest Brazilian producer of C. canephora. In the classical genetic improvement of C. anephora, the selection of plants of high average sieve is associated with a drink of superior quality. Objectives: The objective of this udy was to evaluate the genetic variability of Coffea canephora clones for the agronomic medium sieve (PM). Materials and Methods: The experiment was conducted in the experimental field of Embrapa, municipality of OuroPreto do Oeste-RO, located at coordinates 10º44'53 "S and 62º12'57". One hundred thirty genotypes (clones) of botanical characteristics Conilon, Robusta and intervarietal hybrids were evaluated in the agricultural years 2013-2014 and 2014-2015. The experimental design was a randomized block design with four blocks and four plants per plot, spacing 3.5 x 1.5 meters between plants. Results: Significant difference was found for the grain size. According to the F test, at 5% probability, the genotypes were grouped into five classes according to the mean test. Conclusion: The results obtained subsidized the characterization of a variability gradient of the evaluated trait.

Sign in / Sign up

Export Citation Format

Share Document