Kalana Lagerstätte crinoids: Early Silurian (Llandovery) of central Estonia

2019 ◽  
Vol 94 (1) ◽  
pp. 131-144 ◽  
Author(s):  
William I. Ausich ◽  
Mark A. Wilson ◽  
Oive Tinn
Keyword(s):  
Soft Tissue ◽  
Clay Minerals ◽  
Late Ordovician ◽  
Marine Biota ◽  
Organic Residue ◽  
Elemental Mapping ◽  
Shallow Marine ◽  
The Matrix

AbstractThe Kalana Lagerstätte of early Aeronian (Llandovery, Silurian) age in central Estonia preserves a diverse shallow marine biota dominated by non-calcified algae. This soft-tissue flora and decalcified and calcified crinoids are preserved in situ, in a lens of microlaminated, dolomitized micrite interbedded in a sequence of dolomitized packstones and wackestones. Although the Lagerstätte is dominated by non-calcified algae, crinoids (together with brachiopods and gastropods) are among the most common organisms that were originally comprised of a carbonate skeleton. Two new crinoids are described from this unit, Kalanacrinus mastikae n. gen. n. sp. (large camerate) and Tartucrinus kalanaensis n. gen. n. sp. (small disparid). Interestingly, these two crinoids display contrasting preservation, with the more common large camerate preserved primarily as a decalcified organic residue, whereas the smaller disparid is preserved primarily in calcite. Preservation was assessed using elemental mapping of C, Ca, S, and Si. Columns have the highest portion of Ca, once living soft tissue is indicated by C, S was dispersed as pyrite or associated with organics, and Si is probably associated with clay minerals in the matrix. This new fauna increases our understanding of the crinoid radiation on Baltica following Late Ordovician extinctions.UUID: http://zoobank.org/fb1f98c4-d35a-43f4-aa0d-75e4f8154a13

scholarly journals Early formation and taphonomic significance of kaolinite associated with Burgess Shale fossils

Geology ◽  
2020 ◽  
Vol 49 (4) ◽  
pp. 355-359
Author(s):  
Ross P. Anderson ◽  
Nicholas J. Tosca ◽  
Erin E. Saupe ◽  
Jon Wade ◽  
Derek E.G. Briggs
Keyword(s):  
Soft Tissue ◽  
Soft Tissues ◽  
Heterotrophic Bacteria ◽  
Burgess Shale ◽  
X Ray Diffraction ◽  
The Matrix ◽  
Shale Formation ◽  
Area X

Abstract The role of minerals in Burgess Shale–type fossilization is controversial, particularly that of the clay mineral kaolinite. Kaolinite may have formed on carcasses or attached to them as they decayed, stabilizing organic matter. Alternatively, kaolinite may have formed during metamorphism, playing no role in the preservation of soft tissues. Evaluating the formation and taphonomic role of kaolinite is difficult, because the mineralogy of Burgess Shale–type fossils is incompletely known. We used in situ selected-area X-ray diffraction to constrain the mineralogy of fossils from the classic Burgess Shale Formation in British Columbia, Canada. Fossils can be distinguished from the matrix that surrounds them by the presence of dolomite, kaolinite, and pyrite. Chlorite may be more abundant in the matrix. The preferential survival of kaolinite in association with fossils provides evidence of early diagenetic clay-organic interactions that protected the clay from metamorphic transformation. Kaolinite likely played a crucial role in fossilization, inhibiting the growth of heterotrophic bacteria and aiding polymerization of soft tissue biomolecules. This may result in biases in soft-tissue preservation to areas and times where kaolinite was prevalent.

USING FOOD WEBS TO EXAMINE ECOSYSTEM DYNAMICS DURING BIOTIC INVASIONS IN LATE ORDOVICIAN SHALLOW MARINE COMMUNITIES

2016 ◽  
Author(s):  
Hannah L. Kempf ◽  
◽  
Ashley A. Dineen ◽  
Peter D. Roopnarine ◽  
Carrie L. Tyler
Keyword(s):  
Food Webs ◽  
Late Ordovician ◽  
Ecosystem Dynamics ◽  
Shallow Marine ◽  
Marine Communities

scholarly journals Supramolecular ionic polymer/carbon nanotube composite hydrogels with enhanced electromechanical performance

2020 ◽  
Vol 9 (1) ◽  
pp. 478-488 ◽  
Author(s):  
Yun-Fei Zhang ◽  
Fei-Peng Du ◽  
Ling Chen ◽  
Ka-Wai Yeung ◽  
Yuqing Dong ◽  
...  
Keyword(s):  
Carbon Nanotube ◽  
Ion Mobility ◽  
Artificial Muscles ◽  
Ionic Polymer ◽  
Composite Hydrogels ◽  
The Matrix ◽  
Electromechanical Performance ◽  
Carbon Nanotube Composite ◽  
Robotic Devices

AbstractElectroactive hydrogels have received increasing attention due to the possibility of being used in biomimetics, such as for soft robotics and artificial muscles. However, the applications are hindered by the poor mechanical properties and slow response time. To address these issues, in this study, supramolecular ionic polymer–carbon nanotube (SIPC) composite hydrogels were fabricated via in situ free radical polymerization. The polymer matrix consisted of carbon nanotubes (CNTs), styrene sulfonic sodium (SSNa), β-cyclodextrin (β-CD)-grafted acrylamide, and ferrocene (Fc)-grafted acrylamide, with the incorporation of SSNa serving as the ionic source. On applying an external voltage, the ions accumulate on one side of the matrix, leading to localized swelling and bending of the structure. Therefore, a controllable and reversible actuation can be achieved by changing the applied voltage. The tensile strength of the SIPC was improved by over 300%, from 12 to 49 kPa, due to the reinforcement effect of the CNTs and the supramolecular host–guest interactions between the β-CD and Fc moieties. The inclusion of CNTs not only improved the tensile properties but also enhanced the ion mobility, which lead to a faster electromechanical response. The presented electro-responsive composite hydrogel shows a high potential for the development of robotic devices and soft smart components for sensing and actuating applications.

scholarly journals Quantification of assembly forces during creation of head-neck taper junction considering soft tissue bearing: a biomechanical study

Arthroplasty ◽  
2021 ◽  
Vol 3 (1) ◽  
Author(s):  
Toni Wendler ◽  
Torsten Prietzel ◽  
Robert Möbius ◽  
Jean-Pierre Fischer ◽  
Andreas Roth ◽  
...  
Keyword(s):  
Soft Tissue ◽  
Work Experience ◽  
Soft Tissues ◽  
Force Sensor ◽  
Biomechanical Study ◽  
Measuring System ◽  
Wide Range ◽  
Head Neck

Abstract Background All current total hip arthroplasty (THA) systems are modular in design. Only during the operation femoral head and stem get connected by a Morse taper junction. The junction is realized by hammer blows from the surgeon. Decisive for the junction strength is the maximum force acting once in the direction of the neck axis, which is mainly influenced by the applied impulse and surrounding soft tissues. This leads to large differences in assembly forces between the surgeries. This study aimed to quantify the assembly forces of different surgeons under influence of surrounding soft tissue. Methods First, a measuring system, consisting of a prosthesis and a hammer, was developed. Both components are equipped with a piezoelectric force sensor. Initially, in situ experiments on human cadavers were carried out using this system in order to determine the actual assembly forces and to characterize the influence of human soft tissues. Afterwards, an in vitro model in the form of an artificial femur (Sawbones Europe AB, Malmo, Sweden) with implanted measuring stem embedded in gelatine was developed. The gelatine mixture was chosen in such a way that assembly forces applied to the model corresponded to those in situ. A study involving 31 surgeons was carried out on the aforementioned in vitro model, in which the assembly forces were determined. Results A model was developed, with the influence of human soft tissues being taken into account. The assembly forces measured on the in vitro model were, on average, 2037.2 N ± 724.9 N, ranging from 822.5 N to 3835.2 N. The comparison among the surgeons showed no significant differences in sex (P = 0.09), work experience (P = 0.71) and number of THAs performed per year (P = 0.69). Conclusions All measured assembly forces were below 4 kN, which is recommended in the literature. This could lead to increased corrosion following fretting in the head-neck interface. In addition, there was a very wide range of assembly forces among the surgeons, although other influencing factors such as different implant sizes or materials were not taken into account. To ensure optimal assembly force, the impaction should be standardized, e.g., by using an appropriate surgical instrument.

scholarly journals In situ structure and organization of the influenza C virus surface glycoprotein

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Steinar Halldorsson ◽  
Kasim Sader ◽  
Jack Turner ◽  
Lesley J. Calder ◽  
Peter B. Rosenthal
Keyword(s):  
Membrane Fusion ◽  
Hexagonal Lattice ◽  
Surface Glycoprotein ◽  
Structural Basis ◽  
Virus Surface ◽  
The Matrix ◽  
Influenza C Virus ◽  
Subtomogram Averaging ◽  
Electron Cryotomography

AbstractThe lipid-enveloped influenza C virus contains a single surface glycoprotein, the haemagglutinin-esterase-fusion (HEF) protein, that mediates receptor binding, receptor destruction, and membrane fusion at the low pH of the endosome. Here we apply electron cryotomography and subtomogram averaging to describe the structural basis for hexagonal lattice formation by HEF on the viral surface. The conformation of the glycoprotein in situ is distinct from the structure of the isolated trimeric ectodomain, showing that a splaying of the membrane distal domains is required to mediate contacts that form the lattice. The splaying of these domains is also coupled to changes in the structure of the stem region which is involved in membrane fusion, thereby linking HEF’s membrane fusion conformation with its assembly on the virus surface. The glycoprotein lattice can form independent of other virion components but we show a major role for the matrix layer in particle formation.

scholarly journals The Sorting of Mitochondrial DNA and Mitochondrial Proteins in Zygotes: Preferential Transmission of Mitochondrial DNA to the Medial Bud

1998 ◽  
Vol 142 (3) ◽  
pp. 613-623 ◽  
Author(s):  
Koji Okamoto ◽  
Philip S. Perlman ◽  
Ronald A. Butow
Keyword(s):  
Mitochondrial Dna ◽  
Fluorescent Protein ◽  
Yeast Cells ◽  
Mitochondrial Matrix ◽  
Outer Membranes ◽  
Marker Proteins ◽  
The Matrix ◽  
Green Fluorescent ◽  
Mitochondrial Reticulum

Green fluorescent protein (GFP) was used to tag proteins of the mitochondrial matrix, inner, and outer membranes to examine their sorting patterns relative to mtDNA in zygotes of synchronously mated yeast cells in ρ+ × ρ0 crosses. When transiently expressed in one of the haploid parents, each of the marker proteins distributes throughout the fused mitochondrial reticulum of the zygote before equilibration of mtDNA, although the membrane markers equilibrate slower than the matrix marker. A GFP-tagged form of Abf2p, a mtDNA binding protein required for faithful transmission of ρ+ mtDNA in vegetatively growing cells, colocalizes with mtDNA in situ. In zygotes of a ρ+ × ρ+ cross, in which there is little mixing of parental mtDNAs, Abf2p–GFP prelabeled in one parent rapidly equilibrates to most or all of the mtDNA, showing that the mtDNA compartment is accessible to exchange of proteins. In ρ+ × ρ0 crosses, mtDNA is preferentially transmitted to the medial diploid bud, whereas mitochondrial GFP marker proteins distribute throughout the zygote and the bud. In zygotes lacking Abf2p, mtDNA sorting is delayed and preferential sorting is reduced. These findings argue for the existence of a segregation apparatus that directs mtDNA to the emerging bud.

The contribution of friction stress to the creep behaviour of the nickel-base in situ composite, γ—γ'-Cr 3 C 2

1980 ◽  
Vol 373 (1752) ◽  
pp. 93-109 ◽  
Keyword(s):  
Activation Energy ◽  
Creep Behaviour ◽  
Friction Stress ◽  
Matrix Alloy ◽  
Dislocation Motion ◽  
Self Diffusion ◽  
The Matrix ◽  
Nickel Base ◽  
Distribution Of Stress

Transient creep following stress reductions has been analysed by the method described by McLean (1980) to determine the friction stress σ 0 as a function of temperature and directional solidification conditions for the γ-γ'-Cr 3 Cr 2 in-situ composite and for the γ-γ' matrix alloy. These values of σ 0 are identical to the flow stresses at creep strain rates and can be identified with the sums of the barriers to dislocation motion through the matrix by climb around γ'-particles and Orowan bowing between the carbide fibres. The friction stress and the kinetics of deformation of the composite are determined by the matrix behaviour, whereas its creep strength depends on the distribution of stress between fibre and matrix. When the steady-state creep behaviour of γ-γ'-Cr 3 C 2 is analysed by using the usual power law description in terms of the effective stress σ — σ 0 , rather than the applied stress σ, the stress exponent is ca 4 and the activation energy is similar to the activation energy of self-diffusion for nickel. The results provide strong evidence for the operation of recovery-creep in both the composite and matrix alloys.

Effect of pouring temperature on A356-TiB2 MMCs cast in sand and permanent moulds by in-situ method

2016 ◽  
Vol 25 (5-6) ◽  
pp. 165-169
Author(s):  
C. Rajaravi ◽  
P.R. Lakshminarayanan
Keyword(s):  
Evaluation Studies ◽  
Physical And Mechanical Properties ◽  
Xrd Analysis ◽  
Matrix Composites ◽  
Structure Property ◽  
Pouring Temperature ◽  
Matrix Metal ◽  
Property Evaluation ◽  
The Matrix

AbstractThe paper describes a different condition of pouring temperature by sand and permanent mould to produce A356-6 wt% TiB2 metal matrix composites by in-situ method salt metal reaction route. The observation of SEM micrographs shows particle distribution of the TiB2 and it appears in hexagonal shape in Al matrix. The results of X-ray diffraction (XRD) analysis confirmed the formation of those TiB2 particulates and the results showed TiB2 particles are homogeneously dispersed throughout the matrix metal. Subsequent structure-property evaluation studies indicated sub-micron size reinforcement of in-situ formed TiB2 particles with improved physical and mechanical properties as compared to sand and permanent mould of Al-TiB2 composites. From, the permanent mould Al-TiB2 composite has an advantage of increase the properties over sand mould Al-TiB2 composite.

Sign in / Sign up

Export Citation Format

Share Document