Experimental sensitivity analysis of the global properties of a two-dimensional turbulent wake

2012 ◽  
Vol 693 ◽  
pp. 115-149 ◽  
Author(s):  
Vladimir Parezanović ◽  
Olivier Cadot
Keyword(s):  
Turbulent Wake ◽  
Base Pressure ◽  
Recirculation Region ◽  
Two Dimensional ◽  
Reynolds Stresses ◽  
Recirculation Bubble ◽  
Global Properties ◽  
Bubble Length ◽  
The Impact ◽  
Control Cylinder

AbstractThe sensitivity of the global properties of a two-dimensional turbulent wake produced by the separated flow of a ‘D’-shaped cylinder at $\mathit{Re}= 13\hspace{0.167em} 000$ is investigated experimentally using a small circular control cylinder as a local disturbance. The height of the main cylinder is $D= 25~\mathrm{mm} $ and control cylinders are of diameters $d= 0. 04D$ and $d= 0. 12D$, the former being smaller than the shear layer thickness detaching from the main cylinder, while the latter is larger. In both cases, the control cylinder is able to modify the global frequency, base pressure and spanwise velocity correlation. The results are presented as sensitivity maps. Reynolds stresses spatial structure and the recirculation bubble length are examined in detail when the control cylinder is displaced vertically across the wake at a fixed downstream location. It is found that the increase of the recirculation bubble length is accompanied by a damping of Reynolds stresses with a downstream shift of their spatial structures together with the base pressure increase. The global frequency can be either decreased or increased independently of the bubble length modification. The sensitivity of these global properties is interpreted on the basis of the ability of the control cylinder to change the size of the formation region of the Kármán vortex street by interacting with the primary detached shear layers. The corresponding physical mechanisms are discussed. The impact of a two-dimensional control cylinder on the three-dimensional properties of the wake is examined through spanwise correlation. This is found to be improved whenever the control cylinder is placed inside the recirculation region of the main cylinder wake.

Flow of non-Newtonian fluids over a confined baffle

1991 ◽  
Vol 226 ◽  
pp. 475-496 ◽  
Author(s):  
F. T. Pinho ◽  
J. H. Whitelaw
Keyword(s):  
Reynolds Number ◽  
Polymer Concentration ◽  
Local Strain ◽  
Reynolds Numbers ◽  
Newtonian Fluids ◽  
Momentum Balance ◽  
Recirculation Region ◽  
Reynolds Stresses ◽  
Recirculation Bubble ◽  
Number Range

Measurements of wall pressure, and mean and r.m.s. velocities of the confined flow about a disk of 50 % area blockage have been carried out for two Newtonian fluids and four concentrations of a shear-thinning weakly elastic polymer in aqueous solution encompassing a Reynolds-number range from 220 to 138000. The flows of Newtonian and non-Newtonian fluids were found to be increasingly dependent on Reynolds numbers below 50000, with a decrease in the length of the recirculation region and dampening of the normal Reynolds stresses. At Reynolds numbers less than 25000, the recirculation bubble lengthened and all turbulence components were suppressed with increased polymer concentration so that, at a Reynolds number of 8000, the maximum values of turbulent kinetic energy were 35 and 45% lower than that for water, with 0.2% and 0.4% solutions of the polymer. Non-Newtonian effects were found to be important in regions of low local strain rates in low-Reynolds-number flows, especially inside the recirculation bubble and close to the shear layer, and are represented by both an increase in viscous diffusion and a decrease in turbulent diffusion to, respectively, 6% and 18% of the largest term of the momentum balance with a 0.4 % polymer solution at a Reynolds number of 7700. The asymmetry and unsteadiness of the flow at Reynolds numbers between 400 and 6000 is shown to be an aerodynamic effect which increases in range and amplitude with the more concentrated polymer solutions.

An experimental investigation of an asymmetrical turbulent wake

1972 ◽  
Vol 53 (4) ◽  
pp. 593-610 ◽  
Author(s):  
M. D. Palmer ◽  
J. F. Keffer
Keyword(s):  
Diffusion Mechanism ◽  
Small Diameter ◽  
Flow Characteristics ◽  
Turbulent Energy ◽  
Turbulent Wake ◽  
The Other ◽  
Two Dimensional ◽  
Reynolds Stresses ◽  
Spread Rate ◽  
Mean Velocity

Experiments on the two-dimensional turbulent wake generated by pairs of cylinders of unequal diameter have revealed some interesting flow characteristics. The wake width grew asymmetrically in the downstream direction, spread rate and entrainment coefficients proving larger on the small diameter cylinder side. Mean velocity profiles were also skewed to this side while maximum values of Reynolds stresses were larger on the other. Close to the cylinder, a region or turbulent ‘energy reversal’ was measured. The level of turbulence and the diffusion mechanism were high at this point and some comments are made concerning the structure of the flow under these conditions.

scholarly journals The impact of a local perturbation on global properties of a turbulent wake

2009 ◽  
Vol 21 (7) ◽  
pp. 071701 ◽  
Author(s):  
Vladimir Parezanović ◽  
Olivier Cadot
Keyword(s):  
Turbulent Wake ◽  
Local Perturbation ◽  
Global Properties ◽  
The Impact

Recent Advances and Need of Green Synthesis in Two-Dimensional Materials for Energy Conversion and Storage Applications

2021 ◽  
Vol 16 ◽  
Author(s):  
Joice Sophia Ponraj ◽  
Muniraj Vignesh Narayanan ◽  
Ranjith Kumar Dharman ◽  
Valanarasu Santiyagu ◽  
Ramalingam Gopal ◽  
...  
Keyword(s):  
Energy Storage ◽  
Green Synthesis ◽  
2D Materials ◽  
Synthesis Method ◽  
Energy Storage And Conversion ◽  
Two Dimensional ◽  
Severe Problem ◽  
Energy Conversion And Storage ◽  
Energy Application ◽  
The Impact

: Increasing energy crisis across the globe requires immediate solutions. Two-dimensional (2D) materials are in great significance because of its application in energy storage and conversion devices but the production process significantly impacts the environment thereby posing a severe problem in the field of pollution control. Green synthesis method provides an eminent way of reduction in pollutants. This article reviews the importance of green synthesis in the energy application sector. The focus of 2D materials like graphene, MoS2, VS2 in energy storage and conversion devices are emphasized based on supporting recent reports. The emerging Li-ion batteries are widely reviewed along with their promising alternatives like Zn, Na, Mg batteries and are featured in detail. The impact of green methods in the energy application field are outlined. Moreover, future outlook in the energy sector is envisioned by proposing an increase in 2D elemental materials research.

Study on Grinding Force in Two-Dimensional Ultrasonic Grinding Nano-Ceramics

2010 ◽  
Vol 42 ◽  
pp. 204-208 ◽  
Author(s):  
Xiang Dong Li ◽  
Quan Cai Wang
Keyword(s):  
Mathematical Model ◽  
Ultrasonic Vibration ◽  
Contact Time ◽  
Reaction Force ◽  
Grinding Force ◽  
Two Dimensional ◽  
Indentation Fracture ◽  
Ultrasonic Grinding ◽  
The Impact ◽  
Ultrasonic Vibration Assisted Grinding

In this paper, the characteristic of grinding force in two-dimensional ultrasonic vibration assisted grinding nano-ceramic was studied by experiment based on indentation fracture mechanics, and mathematical model of grinding force was established. The study shows that grinding force mainly result from the impact of the grains on the workpiece in ultrasonic grinding, and the pulse power is much larger than normal grinding force. The ultrasonic vibration frequency is so high and the contact time of grains with the workpiece is so short that the pulse force will be balanced by reaction force from workpiece. In grinding workpiece was loaded by the periodical stress field, which accelerates the fatigue fracture.

Boundary Layer Closure and Heat Transfer in Constant Base Pressure and Simple Wave Guns

1978 ◽  
Vol 100 (4) ◽  
pp. 690-696 ◽  
Author(s):  
A. D. Anderson ◽  
T. J. Dahm
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Layer Thickness ◽  
Boundary Layer Thickness ◽  
Method Of Characteristics ◽  
Simple Wave ◽  
Momentum Equation ◽  
Base Pressure ◽  
Two Dimensional ◽  
The Method Of Characteristics

Solutions of the two-dimensional, unsteady integral momentum equation are obtained via the method of characteristics for two limiting modes of light gas launcher operation, the “constant base pressure gun” and the “simple wave gun”. Example predictions of boundary layer thickness and heat transfer are presented for a particular 1 in. hydrogen gun operated in each of these modes. Results for the constant base pressure gun are also presented in an approximate, more general form.

Reynolds stresses and mean fields generated by pure waves: applications to shear flows and convection in a rotating shell

2008 ◽  
Vol 602 ◽  
pp. 303-326 ◽  
Author(s):  
E. PLAUT ◽  
Y. LEBRANCHU ◽  
R. SIMITEV ◽  
F. H. BUSSE
Keyword(s):  
Shear Flows ◽  
Rossby Waves ◽  
Zonal Flow ◽  
Quantitative Agreement ◽  
Model Systems ◽  
Geometrical Factor ◽  
Wave Flow ◽  
Nonlinear Frequency ◽  
Two Dimensional ◽  
Reynolds Stresses

A general reformulation of the Reynolds stresses created by two-dimensional waves breaking a translational or a rotational invariance is described. This reformulation emphasizes the importance of a geometrical factor: the slope of the separatrices of the wave flow. Its physical relevance is illustrated by two model systems: waves destabilizing open shear flows; and thermal Rossby waves in spherical shell convection with rotation. In the case of shear-flow waves, a new expression of the Reynolds–Orr amplification mechanism is obtained, and a good understanding of the form of the mean pressure and velocity fields created by weakly nonlinear waves is gained. In the case of thermal Rossby waves, results of a three-dimensional code using no-slip boundary conditions are presented in the nonlinear regime, and compared with those of a two-dimensional quasi-geostrophic model. A semi-quantitative agreement is obtained on the flow amplitudes, but discrepancies are observed concerning the nonlinear frequency shifts. With the quasi-geostrophic model we also revisit a geometrical formula proposed by Zhang to interpret the form of the zonal flow created by the waves, and explore the very low Ekman-number regime. A change in the nature of the wave bifurcation, from supercritical to subcritical, is found.

Analysis of the Impact of Specific Heat Ratio on Two-Dimensional Low Maher Number Nozzle Design

2014 ◽  
Vol 590 ◽  
pp. 546-550
Author(s):  
Zhi Qiang Fan ◽  
Hai Bo Yang ◽  
Fei Zhao ◽  
Rong Zhu ◽  
Dong Bai Sun
Keyword(s):  
Specific Heat ◽  
Supersonic Nozzle ◽  
Two Dimensional ◽  
Nozzle Design ◽  
Scheme Design ◽  
Specific Heat Ratio ◽  
Nozzle Contour ◽  
Ratio Change ◽  
Change Impact ◽  
The Impact

The practical requirements of the project the nozzle entrance temperature is high, the gas specific heat ratio varies greatly, so it must consider the specific heat ratio change impact on two-dimensional nozzle contour design. Divided into consideration specific heat ratio change and not consider two kinds of scheme design of 1.4Ma nozzle profile and build the model using the arc line method, numerical simulation is carried out through the CFD software Fluent, analysis of two kinds of design scheme comparison. The results show that, in the supersonic nozzle at low Maher numbers, two schemes of nozzle design profile similarity, parameters change little flow tube, export the Maher number and the flow quality can meet the design requirements, proof of specific heat ratio has little effect on the design results in the design of the nozzle under the condition of low Maher number.

Phonon Coupling and Dielectric Response in 2D Semiconductor

NANO ◽  
2021 ◽  
Author(s):  
Arslan Usman ◽  
Abdul Sattar ◽  
Hamid Latif ◽  
Muhammad Imran
Keyword(s):  
Transition Metal Dichalcogenides ◽  
Coupling Mechanism ◽  
Two Dimensional ◽  
Electron Hole ◽  
Exciton Coupling ◽  
Gain Energy ◽  
Metal Dichalcogenides ◽  
Layered Transition Metal ◽  
The Impact

The impact of phonon and their surrounding environment on exciton and its complexes were investigated in monolayer WSe2 semiconductor. Phonon up-conversion has been studied in past for conventional III–V semiconductors, but its role in two-dimensional layered transition metal dichalcogenides has rarely been explored. We investigated the photoluminescence up-conversion mechanism in WSe2 monolayer and found that a lower energy photon gain energy upto 64[Formula: see text]meV to be up-converted to emission photon at room temperature. Moreover, the phonon-exciton coupling mechanism has also been investigated and the role of dielectric screening has been explored to get complete insight of coulomb’s interaction in these electron-hole pairs. Investigations of charge carrier’s lifetime reveal that boron nitride encapsulated monolayer has shorter recombination time as low as 41 ps as compared to a bare monolayer on SiO2 substrate. These results are very promising for realizing spintronics-based application from two-dimensional layered semiconductors.

Numerical modelling of swirling momentumless turbulent wake dynamics

2018 ◽  
pp. 37-48
Author(s):  
Андрей Геннадьевич Деменков ◽  
Геннадий Георгиевич Черных
Keyword(s):  
Numerical Simulation ◽  
Mathematical Model ◽  
Mathematical Models ◽  
Equations Of Motion ◽  
Turbulent Wake ◽  
The Body ◽  
Jet Flows ◽  
Reynolds Stresses ◽  
Bodies Of Revolution ◽  
Averaged Equations

С применением математической модели, включающей осредненные уравнения движения и дифференциальные уравнения переноса нормальных рейнольдсовых напряжений и скорости диссипации, выполнено численное моделирование эволюции безымпульсного закрученного турбулентного следа с ненулевым моментом количества движения за телом вращения. Получено, что начиная с расстояний порядка 1000 диаметров от тела течение становится автомодельным. На основе анализа результатов численных экспериментов построены упрощенные математические модели дальнего следа. Swirling turbulent jet flows are of interest in connection with the design and development of various energy and chemical-technological devices as well as both study of flow around bodies and solving problems of environmental hydrodynamics, etc. An interesting example of such a flow is a swirling turbulent wake behind bodies of revolution. Analysis of the known works on the numerical simulation of swirling turbulent wakes behind bodies of revolution indicates lack of knowledge on the dynamics of the momentumless swirling turbulent wake. A special case of the motion of a body with a propulsor whose thrust compensates the swirl is studied, but there is a nonzero integral swirl in the flow. In previous works with the participation of the authors, a numerical simulation of the initial stage of the evolution of a swirling momentumless turbulent wake based on a hierarchy of second-order mathematical models was performed. It is shown that a satisfactory agreement of the results of calculations with the available experimental data is possible only with the use of a mathematical model that includes the averaged equations of motion and differential equations for the transfer of normal Reynolds stresses along the rate of dissipation. In the present work, based on the above mentioned mathematical model, a numerical simulation of the evolution of a far momentumless swirling turbulent wake with a nonzero angular momentum behind the body of revolution is performed. It is shown that starting from distances of the order of 1000 diameters from the body the flow becomes self-similar. Based on the analysis of the results of numerical experiments, simplified mathematical models of the far wake are constructed. The authors dedicate this work to the blessed memory of Vladimir Alekseevich Kostomakha.

Sign in / Sign up

Export Citation Format

Share Document