scholarly journals A predictive inner–outer model for streamwise turbulence statistics in wall-bounded flows

2011 ◽  
Vol 681 ◽  
pp. 537-566 ◽  
Author(s):  
ROMAIN MATHIS ◽  
NICHOLAS HUTCHINS ◽  
IVAN MARUSIC
Keyword(s):  
Pressure Gradient ◽  
Turbulent Flows ◽  
Large Scale ◽  
Adverse Pressure Gradient ◽  
Reynolds Numbers ◽  
Streamwise Velocity ◽  
Gradient Flows ◽  
Streamwise Pressure Gradient ◽  
Logarithmic Region ◽  
Inner Region

A model is proposed with which the statistics of the fluctuating streamwise velocity in the inner region of wall-bounded turbulent flows are predicted from a measured large-scale velocity signature from an outer position in the logarithmic region of the flow. Results, including spectra and all moments up to sixth order, are shown and compared to experimental data for zero-pressure-gradient flows over a large range of Reynolds numbers. The model uses universal time-series and constants that were empirically determined from zero-pressure-gradient boundary layer data. In order to test the applicability of these for other flows, the model is also applied to channel, pipe and adverse-pressure-gradient flows. The results support the concept of a universal inner region that is modified through a modulation and superposition of the large-scale outer motions, which are specific to the geometry or imposed streamwise pressure gradient acting on the flow.

Structure of Turbulent Flows Over Forward Facing Steps With Adverse Pressure Gradient

2016 ◽  
Vol 138 (11) ◽  
Author(s):  
Hassan Iftekhar ◽  
Martin Agelin-Chaab
Keyword(s):  
Reynolds Number ◽  
Pressure Gradient ◽  
Turbulent Flows ◽  
Large Scale ◽  
Adverse Pressure Gradient ◽  
Reynolds Numbers ◽  
Step Height ◽  
Reattachment Length ◽  
Mean Velocity ◽  
The Mean

This paper reports an experimental study on the effects of adverse pressure gradient (APG) and Reynolds number on turbulent flows over a forward facing step (FFS) by employing three APGs and three Reynolds numbers. A particle image velocimetry (PIV) technique was used to conduct velocity measurements at several locations downstream, and the flow statistics up to 68 step heights are reported. The step height was maintained at 6 mm, and the Reynolds numbers based on the step height and freestream mean velocity were 1600, 3200, and 4800. The mean reattachment length increases with the increase in Reynolds number without the APG whereas the mean reattachment length remains constant for increasing APG. The proper orthogonal decomposition (POD) results confirmed that higher Reynolds numbers caused the large-scale structures to be more defined and organized close to the step surface.

scholarly journals Turbulent fluctuations above the buffer layer of wall-bounded flows

2008 ◽  
Vol 611 ◽  
pp. 215-236 ◽  
Author(s):  
JAVIER JIMÉNEZ ◽  
SERGIO HOYAS
Keyword(s):  
Reynolds Number ◽  
Buffer Layer ◽  
Turbulent Flows ◽  
Large Scale ◽  
Pressure Fluctuations ◽  
Strong Support ◽  
Reynolds Numbers ◽  
Streamwise Velocity ◽  
Normal Velocity ◽  
Channel Statistics

The behaviour of the velocity and pressure fluctuations in the logarithmic and outer layers of turbulent flows is analysed using spectral information and probability density functions from channel simulations at Reτ≤2000. Comparisons are made with experimental data at higher Reynolds numbers. It is found, in agreement with previous investigations, that the intensity profiles of the streamwise and spanwise velocity components have logarithmic ranges that are traced to the widening spectral range of scales as the wall is approached. The same is true for the pressure, both theoretically and observationally, but not for the normal velocity or for the tangential stress cospectrum, although even those two quantities have structures with lengths of the order of several hundred times the wall distance. Because the logarithmic range grows longer as the Reynolds number increases, variables which are ‘attached’ in this sense scale in the buffer layer in mixed units. These results give strong support to the attached-eddy scenario proposed by Townsend (1976), but they are not linked to any particular eddy model. The scaling of the outer modes is also examined. The intensity of the streamwise velocity at fixed y/h increases with the Reynolds number. This is traced to the large-scale modes, and to an increased intensity of the ejections but not of the sweeps. Several differences are found between the outer structures of different flows. The outer modes of the spanwise and wall-normal velocities in boundary layers are stronger than in internal flows, and their streamwise velocities penetrate closer to the wall. As a consequence, their logarithmic layers are thinner, and some of their logarithmic slopes are different. The channel statistics are available electronically at http://torroja.dmt.upm.es/ftp/channels/.

scholarly journals Investigation of turbulent boundary layer flows with adverse pressure gradient by means of 3D Lagrangian particle tracking with Shake-The-Box

2021 ◽  
Vol 1 (1) ◽  
Author(s):  
Matteo Novara ◽  
Daniel Schanz ◽  
Reinhard Geisler ◽  
Janos Agocs ◽  
Felix Eich ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Pressure Gradient ◽  
Large Scale ◽  
Adverse Pressure Gradient ◽  
Spanwise Direction ◽  
Streamwise Direction ◽  
Lagrangian Particle Tracking ◽  
Lagrangian Particle ◽  
Time Resolved ◽  
Logarithmic Region

A large-scale 3D Lagrangian particle tracking (LPT) investigation of a turbulent boundary layer (TBL) flow developing across different pressure gradient regions is presented in this study. Three high-speed multi-camera imaging systems, LED illumination and helium-filled soap bubbles (HFSB) tracers have been adopted to produce time-resolved sequences of particle images over a large volume encompassing approximately 3 m in the streamwise direction, 0:8 m in the spanwise direction and 0:25 m in the wall-normal direction. Individual tracers have been reconstructed and tracked within the imaged volume by means of the Shake-The-Box algorithm (STB, Schanz et al. (2016)); the FlowFit data assimilation algorithm (Gesemann et al. (2016)) has been used to evaluate the spatial velocity gradients and to interpolate the scattered LPT results onto a regular grid. Thanks to the large size of the investigated volume and to the time-resolved nature of the recorded images, the entire spatial extent of the large-scale coherent motions within the logarithmic region of the TBL (i.e. superstructures) could be captured and their dynamics investigated during their development over several boundary layer thickness in the streamwise direction, from the zero pressure gradient region (ZPG) to the adverse pressure gradient region (APG). Two free-stream velocities were investigated, namely 7 and 14m=s, corresponding to Ret ~ 3,000 and 5,000 respectively. The results confirm the location and scale of the elongated high- and low-momentum structures in the logarithmic region, as well as their meandering in the spanwise direction. Two-point correlation statistics show that the width and spacing of the superstructures are not affected by the transition from the ZPG to the APG region. The analysis of the instantaneous flow realizations from both a Lagrangian and Eulerian perspective indicates the presence of significant fluid particle elements exchange across the interfaces of the large-scale structures.

Characterization of Geometrical and Temporal Properties of Large-scale Motions in Turbulent Flows

2021 ◽  
Author(s):  
Christina Tsai ◽  
Kuang-Ting Wu
Keyword(s):  
Turbulent Flow ◽  
Turbulent Flows ◽  
Coherent Structures ◽  
Large Scale ◽  
Streamwise Velocity ◽  
Turbulent Structures ◽  
Temporal Properties ◽  
Turbulent Statistics ◽  
Spatial Locations

<p>It is demonstrated that turbulent boundary layers are populated by a hierarchy of recurrent structures, normally referred to as the coherent structures. Thus, it is desirable to gain a better understanding of the spatial-temporal characteristics of coherent structures and their impact on fluid particles. Furthermore, the ejection and sweep events play an important role in turbulent statistics. Therefore, this study focuses on the characterizations of flow particles under the influence of the above-mentioned two structures.</p><div><span>With regard to the geometry of turbulent structures, </span><span>Meinhart & Adrian (1995) </span>first highlighted the existence of large and irregularly shaped regions of uniform streamwise momentum zone (hereafter referred to as a uniform momentum zone, or UMZs), regions of relatively similar streamwise velocity with coherence in the streamwise and wall-normal directions.  <span>Subsequently, </span><span>de Silva et al. (2017) </span><span>provided a detection criterion that had previously been utilized to locate the uniform momentum zones (UMZ) and demonstrated the application of this criterion to estimate the spatial locations of the edges that demarcates UMZs.</span></div><div> </div><div>In this study, detection of the existence of UMZs is a pre-process of identifying the coherent structures. After the edges of UMZs are determined, the identification procedure of ejection and sweep events from turbulent flow DNS data should be defined. As such, an integrated criterion of distinguishing ejection and sweep events is proposed. Based on the integrated criterion, the statistical characterizations of coherent structures from available turbulent flow data such as event durations, event maximum heights, and wall-normal and streamwise lengths can be presented.</div>

Combined Simultaneous Flow Visualization/Hot-Wire Anemometry for the Study of Turbulent Flows

1980 ◽  
Vol 102 (2) ◽  
pp. 174-182 ◽  
Author(s):  
R. E. Falco
Keyword(s):  
Pressure Gradient ◽  
Flow Visualization ◽  
Turbulent Flows ◽  
Unsteady Flows ◽  
Gradient Flows ◽  
Hot Wire ◽  
Visual Patterns ◽  
Favorable Pressure Gradient ◽  
Hot Wire Anemometry ◽  
Scattering Light

The measurement of coherent motions in turbulent and unsteady flows is discussed. A technique which discriminates these motions based upon the patterns they create by scattering light from a fog of tiny oil drops is described. It is shown that hot-wire anemometry can be used in this oil fog so that hot-wire data can be conditionally sampled to the visual patterns, giving directly interpretable measures of the importance of the selected features. The three-dimensionality of the coherent motions can also be directly accounted for, using mutually orthogonal sheets of light. Results of step flows, and zero and favorable pressure gradient flows are described.

Pressure gradient effects on the large-scale structure of turbulent boundary layers

2013 ◽  
Vol 715 ◽  
pp. 477-498 ◽  
Author(s):  
Zambri Harun ◽  
Jason P. Monty ◽  
Romain Mathis ◽  
Ivan Marusic
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Pressure Gradient ◽  
Boundary Layers ◽  
Amplitude Modulation ◽  
Large Scale ◽  
Outer Region ◽  
Adverse Pressure Gradient ◽  
Turbulent Boundary Layers ◽  
Small Scale

AbstractResearch into high-Reynolds-number turbulent boundary layers in recent years has brought about a renewed interest in the larger-scale structures. It is now known that these structures emerge more prominently in the outer region not only due to increased Reynolds number (Metzger & Klewicki, Phys. Fluids, vol. 13(3), 2001, pp. 692–701; Hutchins & Marusic, J. Fluid Mech., vol. 579, 2007, pp. 1–28), but also when a boundary layer is exposed to an adverse pressure gradient (Bradshaw, J. Fluid Mech., vol. 29, 1967, pp. 625–645; Lee & Sung, J. Fluid Mech., vol. 639, 2009, pp. 101–131). The latter case has not received as much attention in the literature. As such, this work investigates the modification of the large-scale features of boundary layers subjected to zero, adverse and favourable pressure gradients. It is first shown that the mean velocities, turbulence intensities and turbulence production are significantly different in the outer region across the three cases. Spectral and scale decomposition analyses confirm that the large scales are more energized throughout the entire adverse pressure gradient boundary layer, especially in the outer region. Although more energetic, there is a similar spectral distribution of energy in the wake region, implying the geometrical structure of the outer layer remains universal in all cases. Comparisons are also made of the amplitude modulation of small scales by the large-scale motions for the three pressure gradient cases. The wall-normal location of the zero-crossing of small-scale amplitude modulation is found to increase with increasing pressure gradient, yet this location continues to coincide with the large-scale energetic peak wall-normal location (as has been observed in zero pressure gradient boundary layers). The amplitude modulation effect is found to increase as pressure gradient is increased from favourable to adverse.

Characterizing developing adverse pressure gradient flows subject to surface roughness

2009 ◽  
Vol 48 (4) ◽  
pp. 663-677 ◽  
Author(s):  
Brian Brzek ◽  
Donald Chao ◽  
Özden Turan ◽  
Luciano Castillo
Keyword(s):  
Surface Roughness ◽  
Pressure Gradient ◽  
Adverse Pressure Gradient ◽  
Gradient Flows

Structural Parameters and Prediction of Adverse Pressure Gradient Turbulent Flows: An Improved k-ε Model

1995 ◽  
Vol 117 (3) ◽  
pp. 424-432 ◽  
Author(s):  
G. Chukkapalli ◽  
O¨. F. Turan
Keyword(s):  
Pressure Gradient ◽  
Turbulent Flows ◽  
Reynolds Stress ◽  
Eddy Viscosity ◽  
Structural Parameters ◽  
Adverse Pressure Gradient ◽  
Reynolds Stress Model ◽  
Model Representation ◽  
Stress Model ◽  
Kinetic Diffusion

A modified k-ε model is proposed to predict complex, adverse pressure gradient, turbulent diffuser flows. The need for an eddy viscosity is eliminated by using three structural parameters. A fuller treatment of the rate of kinetic diffusion terms is incorporated with a Reynolds stress model representation. A thorough evaluation is given of the three structural parameters in three decreasing and one increasing adverse pressure gradient diffuser flows leading to a three-layer representation. The results indicate the need for better modeling of the ε-equation.

Sign in / Sign up

Export Citation Format

Share Document