scholarly journals DESIGN TOOL TO DEVELOP HIGHLY EFFICIENT OPTOMECHATRONIC SYSTEMS

2020 ◽  
Vol 1 ◽  
pp. 305-314
Author(s):  
P.-P. Ley ◽  
J. August ◽  
R. Lachmayer

AbstractIn the domain of optical engineering, optomechatronic systems are predominantly developed using conventional ray tracing methods such as sequential and non-sequential ray tracing. However, the increasing complexity of these systems in combination with the demand for high efficiency and high image quality leads to the fact that conventional methods to develop these systems reach their limits. In order to be able to develop highly efficient systems with high image quality, this contribution introduces a hybrid ray tracing method using an advanced optimization function.

Photonics ◽  
2020 ◽  
Vol 7 (3) ◽  
pp. 71
Author(s):  
Wei-Chia Su ◽  
Shao-Kui Zhou ◽  
Bor-Shyh Lin ◽  
Wen-Kai Lin

Generally, the diffractive waveguide combiner and computer-generated hologram (CGH) technique have the potential to achieve compact head-mounted display (HMD) with a natural 3D display function. However, the diffractive waveguide combiner will degrade the image quality because of aberration. In order to resolve this issue, the complex analysis based on the ray-tracing method is necessary. Since the major aberration of the waveguide combiners is only astigmatism and anamorphic distortion, only these two aberrations were discussed in this paper. Furthermore, two common waveguide structures were discussed here. In total, four formulas were summarized to analyze aberration and anamorphic distortion in these two structures. Finally, the simplified formulas were verified with the commercial ray-tracing software Zemax. The calculated results of the proposed method match the simulation of Zemax software well. Therefore, the aberration of an arbitrary similar diffractive waveguide can be analyzed by the proposed method. This will make the designing process simpler and faster.


2021 ◽  
Vol 11 (3) ◽  
pp. 912
Author(s):  
Qingpeng Zhang ◽  
Yi Tan ◽  
Ge Ren ◽  
Tao Tang

For gradient refractive index media with large refractive index gradients, traditional ray tracing methods based on refined elements or spatial geometric steps have problems such as low tracing accuracy and efficiency. The ray tracing method based on refractive index steps proposed in this paper can effectively solve this problem. This method uses the refractive index step to replace the spatial geometric step. The starting point and the end point of each ray tracing step are on the constant refractive-index surfaces. It avoids the problem that the traditional tracing method cannot adapt to the area of sudden change in the refractive index and the area where the refractive index changes sharply. Therefore, a suitable distance can be performed in the iterative process. It can achieve high-efficiency and precise ray tracing in areas whether the refractive index changes slowly or sharply. According to the comparison of calculation examples, this method can achieve a tracing accuracy of 10−5 mm. The speed and precision of ray tracing are better than traditional methods.


2000 ◽  
Vol 54 (3) ◽  
pp. 46-56
Author(s):  
K. Uchida ◽  
D. Da ◽  
C. K. Lee ◽  
T. Matsunaga ◽  
T. Imai ◽  
...  

Energy ◽  
2021 ◽  
Vol 228 ◽  
pp. 120438
Author(s):  
Asher J. Hancock ◽  
Laura B. Fulton ◽  
Justin Ying ◽  
Corey E. Clifford ◽  
Shervin Sammak ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document