Dense high-entropy boride ceramics with ultra-high hardness

2019 ◽  
Vol 164 ◽  
pp. 135-139 ◽  
Author(s):  
Yan Zhang ◽  
Wei-Ming Guo ◽  
Ze-Bin Jiang ◽  
Qi-Qi Zhu ◽  
Shi-Kuan Sun ◽  
...  
Keyword(s):  
High Hardness ◽  
High Entropy ◽  
Boride Ceramics

scholarly journals Understanding the Links between the Composition-Processing-Properties in New Formulations of HEAs Sintered by SPS

Metals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 888
Author(s):  
Paula Alvaredo-Olmos ◽  
Jon Molina-Aldareguía ◽  
Alvaro Vaz-Romero ◽  
Estela Prieto ◽  
Jesús González-Julián ◽  
...  
Keyword(s):  
High Hardness ◽  
Processing Parameters ◽  
Heating Rates ◽  
High Entropy ◽  
Plasma Sintering ◽  
Mechanical Study ◽  
Spark Plasma ◽  
Processing Properties ◽  
Bcc Phase ◽  
Hardness Values

This work presents two new compositions of high entropy alloys (HEAs) that were designed with the aim of obtaining a body-centered cubic (BCC) phase with high hardness values and a moderate density. Sintering was performed using Spark Plasma Sintering (SPS) with different heating rates to determine the influence of the processing parameters on the phase formation. The microstructural study revealed that the presence of Ni in the composition promoted phase separation, and the mechanical study confirmed a clear influence on the mechanical properties of both the composition and heating rate. The combination of microscopy with compression and nanoindentation tests at room and high temperature made it possible to advance our understanding of the relationships between the composition, processing, and properties of this emerging group of alloys.

Laser Assisted High Entropy Alloy Coating on Low Carbon Steel

2019 ◽  
Vol 813 ◽  
pp. 159-164
Author(s):  
Carlos Alberto Souto ◽  
Gustavo Faria Melo da Silva ◽  
Laura Angelica Ardila Rodriguez ◽  
Aline C. de Oliveira ◽  
Kátia Regina Cardoso
Keyword(s):  
Wear Resistance ◽  
Carbon Steel ◽  
Low Carbon Steel ◽  
High Hardness ◽  
Alloy Coating ◽  
High Entropy Alloy ◽  
Nominal Composition ◽  
Low Carbon ◽  
High Entropy ◽  
Scan Speed

Coatings with high entropy alloys of the AlCoCrFeNiV system were obtained by selective laser melting on low carbon steel substrates. The effect of the variation of the Fe and V contents as well as the laser processing parameters in the development of the coating were evaluated. The coatings were obtained from the simple powder mixtures of the high purity elemental components in a planetary ball mill. The coatings were obtained by using CO2 laser with a power of 100 W, diameter of 0.16 mm, and scan speed varying from 3 to 12 mm/s. Phase constituents, microstructure and hardness were investigated by XRD, SEM, and microhardness tester, respectively. Wear resistance measurements were carried out by the micro-abrasion method using ball-cratering tests. The coatings presented good adhesion to the substrate and high hardness, of the order of 480 to 650 HV. Most homogeneous coating with nominal composition was obtained by using the higher scan speed, 12 mm/s. Vanadium addition increased hardness and gave rise to a high entropy alloy coating composed by BCC solid solutions. Ball cratering tests conducted on HEA layer showing improvement of material wear resistance, when compared to base substrate, decreasing up to 88% its wear rate, from 1.91x10-6 mm3/Nmm to 0.23x10-6 mm3/Nmm.

scholarly journals Enhanced Wear Behaviour of Spark Plasma Sintered AlCoCrFeNiTi High-Entropy Alloy Composites

Materials ◽  
2018 ◽  
Vol 11 (11) ◽  
pp. 2225 ◽  
Author(s):  
Martin Löbel ◽  
Thomas Lindner ◽  
Thomas Lampke
Keyword(s):  
Wear Resistance ◽  
High Hardness ◽  
Solid Lubricants ◽  
Wear Behaviour ◽  
High Entropy Alloy ◽  
Surface Protection ◽  
High Entropy ◽  
Production Route ◽  
The Coefficient Of Friction ◽  
Spark Plasma

High hardness and good wear resistance have been revealed for the high-entropy alloy (HEA) system AlCoCrFeNiTi, confirming the potential for surface protection applications. Detailed studies to investigate the microstructure and phase formation have been carried out using different production routes. Powder metallurgical technologies allow for much higher flexibility in the customisation of materials compared to casting processes. Particularly, spark plasma sintering (SPS) enables the fast processing of the feedstock, the suppression of grain coarsening and the production of samples with a low porosity. Furthermore, solid lubricants can be incorporated for the improvement of wear resistance and the reduction of the coefficient of friction (COF). This study focuses on the production of AlCoCrFeNiTi composites comprising solid lubricants. Bulk materials with a MoS2 content of up to 15 wt % were produced. The wear resistance and COF were investigated in detail under sliding wear conditions in ball-on-disk tests at room temperature and elevated temperature. At least 10 wt % of MoS2 was required to improve the wear behaviour in both test conditions. Furthermore, the effects of the production route and the content of solid lubricant on microstructure formation and phase composition were investigated. Two major body-centred cubic (bcc) phases were detected in accordance with the feedstock. The formation of additional phases indicated the decomposition of MoS2.

scholarly journals High-pressure preparation of high-hardness CoCrFeNiMo0.4 high-entropy alloy

2021 ◽  
pp. 105718
Author(s):  
Yulin Qin ◽  
Yipeng Wang ◽  
Shixue Guan ◽  
Chuqi Wang ◽  
Bo Jiang ◽  
...  
Keyword(s):  
High Pressure ◽  
High Hardness ◽  
High Entropy Alloy ◽  
High Entropy

Processing of dense high-entropy boride ceramics

2020 ◽  
Vol 40 (12) ◽  
pp. 3815-3823 ◽  
Author(s):  
Lun Feng ◽  
William G. Fahrenholtz ◽  
Gregory E. Hilmas
Keyword(s):  
High Entropy ◽  
Boride Ceramics

scholarly journals Bulk high-entropy nitrides and carbonitrides

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Olivia F. Dippo ◽  
Neda Mesgarzadeh ◽  
Tyler J. Harrington ◽  
Grant D. Schrader ◽  
Kenneth S. Vecchio
Keyword(s):  
Mechanical Properties ◽  
High Temperature ◽  
Configurational Entropy ◽  
Temperature Stability ◽  
High Hardness ◽  
Valence Electron Concentration ◽  
High Temperature Stability ◽  
High Entropy ◽  
Rule Of Mixtures ◽  
Traditional Ceramics

AbstractHigh-entropy ceramics have potential to improve the mechanical properties and high-temperature stability over traditional ceramics, and high entropy nitrides and carbonitrides (HENs and HECNs) are particularly attractive for high temperature and high hardness applications. The synthesis of 5 bulk HENs and 4 bulk HECNs forming single-phase materials is reported herein among 11 samples prepared. The hardness of HENs and HECNs increased by an average of 22% and 39%, respectively, over the rule-of-mixtures average of their monocarbide and mononitride precursors. Similarly, elastic modulus values increased by an average of 17% in nitrides and 31% in carbonitrides over their rule-of-mixtures values. The enhancement in mechanical properties is tied to an increase in the configurational entropy and a decrease in the valence electron concentration, providing parameters for tuning mechanical properties of high-entropy ceramics.

scholarly journals Phase Evolution and Microstructure Analysis of CoCrFeNiMo High-Entropy Alloy for Electro-Spark-Deposited Coatings for Geothermal Environment

Coatings ◽  
2019 ◽  
Vol 9 (6) ◽  
pp. 406 ◽  
Author(s):  
Sigrun N. Karlsdottir ◽  
Laura E. Geambazu ◽  
Ioana Csaki ◽  
Andri I. Thorhallsson ◽  
Radu Stefanoiu ◽  
...  
Keyword(s):  
Bulk Material ◽  
Microstructural Analysis ◽  
Electrochemical Corrosion ◽  
High Hardness ◽  
Phase Evolution ◽  
Vacuum Arc ◽  
High Entropy Alloy ◽  
Face Centered Cubic ◽  
Σ Phase ◽  
High Entropy

In this work, a CoCrFeNiMo high-entropy alloy (HEA) material was prepared by the vacuum arc melting (VAM) method and used for electro-spark deposition (ESD). The purpose of this study was to investigate the phase evolution and microstructure of the CoCrFeNiMo HEA as as-cast and electro-spark-deposited (ESD) coating to assess its suitability for corrosvie environments encountered in geothermal energy production. The composition, morphology, and structure of the bulk material and the coating were analyzed using scanning electron microscopy (SEM) coupled with energy-dispersive spectroscopy (EDS), and X-ray diffraction (XRD). The hardness of the bulk material was measured to access the mechanical properties when preselecting the composition to be pursued for the ESD coating technique. For the same purpose, electrochemical corrosion tests were performed in a 3.5 wt.% NaCl solution on the bulk material. The results showed the VAM CoCrFeNiMo HEA material had high hardness (593 HV) and low corrosion rates (0.0072 mm/year), which is promising for the high wear and corrosion resistance needed in the harsh geothermal environment. The results from the phase evolution, chemical composition, and microstructural analysis showed an adherent and dense coating with the ESD technique, but with some variance in the distribution of elements in the coating. The crystal structure of the as-cast electrode CoCrFeNiMo material was identified as face centered cubic with XRD, but additional BCC and potentially σ phase was formed for the CoCrFeNiMo coating.

scholarly journals Effect of Heat Treatment and Titanium Addition on the Microstructure and Mechanical Properties of Cast Fe31Mn28 Ni15Al24.5Tix High-Entropy Alloys

2019 ◽  
Vol 2019 ◽  
pp. 1-10 ◽  
Author(s):  
Shimaa El-Hadad ◽  
Mervat Ibrahim ◽  
Mohamed Mourad
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Treatment Time ◽  
Low Cost ◽  
High Hardness ◽  
Lamellar Spacing ◽  
High Entropy Alloys ◽  
Titanium Addition ◽  
High Entropy ◽  
Ti Content

High-entropy alloys (HEAs) are multiprincipal element alloys with controllable properties. Studying the mechanical properties of these alloys and relating them to their microstructures is of interest. In the current investigation, Fe31Mn28 Ni15Al24.5Tix high-entropy alloys with Ti content (0–3 wt.%) were prepared by casting in an induction furnace. Different heat treatments were applied, and the microstructure and hardness of the cast samples were studied. It was observed that addition of up to 3.0 wt.% Ti significantly increases the hardness of the alloy from 300 to 500 (Hv) by the combined effect of solid solution strengthening and via decreasing lamellar spacing. Heat treatment at 900°C for 10 h enhanced the hardness at lower Ti percentages (0.0–0.8 wt.%) by decreasing the lamellar spacing, while no change was observed at higher Ti content. It was also observed that extending the treatment time to 20 h affected negatively the hardness of the alloy. Concluding, HEAs can achieve high hardness using low-cost principle elements with minor alloying additives compared to the other traditional alloys.

scholarly journals High Strength and Deformation Mechanisms of Al0.3CoCrFeNi High-Entropy Alloy Thin Films Fabricated by Magnetron Sputtering

Entropy ◽  
2019 ◽  
Vol 21 (2) ◽  
pp. 146 ◽  
Author(s):  
Wei-Bing Liao ◽  
Hongti Zhang ◽  
Zhi-Yuan Liu ◽  
Pei-Feng Li ◽  
Jian-Jun Huang ◽  
...  
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Magnetron Sputtering ◽  
High Hardness ◽  
Deformation Mechanisms ◽  
High Entropy Alloy ◽  
Alloy Thin Film ◽  
Face Centered Cubic ◽  
High Entropy ◽  
Strength And Deformation

Recently, high-entropy alloy thin films (HEATFs) with nanocrystalline structures and high hardness were developed by magnetron sputtering technique and have exciting potential to make small structure devices and precision instruments with sizes ranging from nanometers to micrometers. However, the strength and deformation mechanisms are still unclear. In this work, nanocrystalline Al0.3CoCrFeNi HEATFs with a thickness of ~4 μm were prepared. The microstructures of the thin films were comprehensively characterized, and the mechanical properties were systematically studied. It was found that the thin film was smooth, with a roughness of less than 5 nm. The chemical composition of the high entropy alloy thin film was homogeneous with a main single face-centered cubic (FCC) structure. Furthermore, it was observed that the hardness and the yield strength of the high-entropy alloy thin film was about three times that of the bulk samples, and the plastic deformation was inhomogeneous. Our results could provide an in-depth understanding of the mechanics and deformation mechanism for future design of nanocrystalline HEATFs with desired properties.

Sign in / Sign up

Export Citation Format

Share Document