Kapok fiber structure-oriented polyallylthiourea: Efficient adsorptive reduction for Au(III) for catalytic application

Polymer ◽  
2014 ◽  
Vol 55 (20) ◽  
pp. 5211-5217 ◽  
Author(s):  
Yian Zheng ◽  
Yongfeng Zhu ◽  
Aiqin Wang
Keyword(s):  
Fiber Structure ◽  
Kapok Fiber ◽  
Catalytic Application

scholarly journals Kapok Fiber- Structure, Characteristics and Applications: A Review

2021 ◽  
Vol 37 (3) ◽  
pp. 513-523
Author(s):  
Reygan H. Sangalang
Keyword(s):  
Electrode Material ◽  
Scientific Community ◽  
Natural Fiber ◽  
Fiber Structure ◽  
Kapok Fiber ◽  
Structure Characteristics ◽  
Pale Yellow ◽  
Important Material ◽  
Brown Fiber

Kapok fiber is a light, cottony, pale yellow to brown fiber obtained from Kapok fruit. The fiber is characterized by a large, hollow lumen and is generally hydrophobic due to its waxy surface. The fiber is difficult to spun into thread and it is commonly used as filling in mattresses, pillows, stuffed toys and upholstery. Compared to other natural fiber, kapok’s use is limited in application. However, it is now gaining attention in the scientific community as an important material due to its outstanding properties. This review will provide a detailed overview on the structure, composition and morphology of kapok fiber. It will also discuss the recent researches conducted on kapok fiber including its application as adsorbent material, biocomposite, biotemplate, electrode material and others.

Use of thermomechanical pulp fibers from waste woods for making eco-friendly cushioning material

TAPPI Journal ◽  
2010 ◽  
Vol 9 (7) ◽  
pp. 15-21 ◽  
Author(s):  
JI-YOUNG LEE ◽  
CHUL-HWAN KIM ◽  
JEONG-MIN SEO ◽  
HO-KYUNG CHUNG ◽  
KYUNG-KIL BACK ◽  
...  
Keyword(s):  
Impact Test ◽  
Product Distribution ◽  
Expanded Polystyrene ◽  
Thermomechanical Pulp ◽  
Fiber Structure ◽  
Pulp Fibers ◽  
Cationic Starch ◽  
Thermal Insulating ◽  
Surface Sizing ◽  
The Impact

Eco-friendly cushioning materials were made with thermomechanical pulps (TMPs) from waste woods collected from local mountains in Korea, using a suction-forming method without physical pressing. The TMP cushions had superior shock-absorbing performance, with lower elastic moduli than expanded polystyrene (EPS) or molded pulp. Even though the TMP cushions made using various suction times had many voids in their inner fiber structure, their apparent densities were a little higher than that of EPS and much lower than that of molded pulp. The addition of cationic starch contributed to an increase in the elastic modulus of the TMP cushions without increasing the apparent density, an effect which was different from that of surface sizing with starch. In the impact test, the TMP cushions showed a more ductile pattern than the brittle EPS. The porosity of the TMP cushion was a little less than that of EPS and much greater than that of molded pulp. The porous structure of the TMP cushions contributed to their excellent thermal insulating capacity, which was equivalent to that of EPS. In summary, the TMP packing cushions showed great potential for surviving external impacts during product distribution.

Impact of fiber structure on edge-wicking of highly-sized paperboard

TAPPI Journal ◽  
2018 ◽  
Vol 17 (08) ◽  
pp. 437-443
Author(s):  
Lebo Xu ◽  
Jeremy Meyers ◽  
Peter Hart
Keyword(s):  
Fiber Surface ◽  
Manufacturing Processes ◽  
Paper Machine ◽  
Liquid Penetration ◽  
Fiber Structure ◽  
Cut Edge ◽  
Local Fiber

Coffee edge-wicking testing was conducted on two groups of highly-sized paperboard manufactured at two mills with similar manufacturing processes, but with vastly different local fiber sources. Although the Hercules size test (HST) indicated similar internal size levels between the two types of board, the edge-wicking behavior was noticeably different. Analysis of fiber structure revealed that the board with more edge-wicking had fibers with thicker fiber walls, which kept the fiber lumen more open after pressing and drying on a paper machine. It was demonstrated that liquid penetration through voids between fibers in highly-sized paperboard was limited, because the fiber surface was well protected by the presence of sufficient sizing agent. Nevertheless, freshly exposed fiber walls and lumens at the cut edge of the sheet were not protected by sizing material, which facilitated edge-wicking. The correlation between fiber structure and edge-wicking behavior was highlighted in this work to inspire development of novel sizing strategies that protect the freshly cut edge of the sheet from edge-wicking.

Catalytic Application of Mesoporous ZSM-5 Zeolite

2014 ◽  
Vol 18 (10) ◽  
pp. 1305-1322 ◽  
Author(s):  
Zheng Wu ◽  
Yi Wang
Keyword(s):  
Catalytic Application

cis-Dioxomolybdenum(VI) Complexes Containing Chiral Ligands: Synthesis and Catalytic Application in Olefin Epoxidation

2011 ◽  
Vol 1 (2) ◽  
pp. 131-139 ◽  
Author(s):  
Jose A. Brito ◽  
Nathalie Saffon ◽  
Montserrat Gomez ◽  
Beatriz Royo
Keyword(s):  
Chiral Ligands ◽  
Olefin Epoxidation ◽  
Catalytic Application

scholarly journals A detailed analysis of anatomical plausibility of crossed and uncrossed streamline rendition of the dentato-rubro-thalamic tract (DRT(T)) in a commercial stereotactic planning system

2021 ◽  
Author(s):  
Volker A. Coenen ◽  
Bastian E. Sajonz ◽  
Peter C. Reinacher ◽  
Christoph P. Kaller ◽  
Horst Urbach ◽  
...  
Keyword(s):  
Surgical Planning ◽  
Ground Truth ◽  
Planning System ◽  
Single Subject ◽  
Fiber Structure ◽  
Native Space ◽  
Volume Of Interest ◽  
Mri Scans ◽  
Magnetic Resonance Imaging Mri ◽  
The Individual

Abstract Background An increasing number of neurosurgeons use display of the dentato-rubro-thalamic tract (DRT) based on diffusion weighted imaging (dMRI) as basis for their routine planning of stimulation or lesioning approaches in stereotactic tremor surgery. An evaluation of the anatomical validity of the display of the DRT with respect to modern stereotactic planning systems and across different tracking environments has not been performed. Methods Distinct dMRI and anatomical magnetic resonance imaging (MRI) data of high and low quality from 9 subjects were used. Six subjects had repeated MRI scans and therefore entered the analysis twice. Standardized DICOM structure templates for volume of interest definition were applied in native space for all investigations. For tracking BrainLab Elements (BrainLab, Munich, Germany), two tensor deterministic tracking (FT2), MRtrix IFOD2 (https://www.mrtrix.org), and a global tracking (GT) approach were used to compare the display of the uncrossed (DRTu) and crossed (DRTx) fiber structure after transformation into MNI space. The resulting streamlines were investigated for congruence, reproducibility, anatomical validity, and penetration of anatomical way point structures. Results In general, the DRTu can be depicted with good quality (as judged by waypoints). FT2 (surgical) and GT (neuroscientific) show high congruence. While GT shows partly reproducible results for DRTx, the crossed pathway cannot be reliably reconstructed with the other (iFOD2 and FT2) algorithms. Conclusion Since a direct anatomical comparison is difficult in the individual subjects, we chose a comparison with two research tracking environments as the best possible “ground truth.” FT2 is useful especially because of its manual editing possibilities of cutting erroneous fibers on the single subject level. An uncertainty of 2 mm as mean displacement of DRTu is expectable and should be respected when using this approach for surgical planning. Tractographic renditions of the DRTx on the single subject level seem to be still illusive.

Sign in / Sign up

Export Citation Format

Share Document