scholarly journals Effect of Matrix Modification on Interlaminar Shear Strength of Glass Fibre Reinforced Epoxy Composites at Cryogenic Temperature

2015 ◽  
Vol 67 ◽  
pp. 1068-1073 ◽  
Author(s):  
Zhixiong Wu ◽  
Jingwen Li ◽  
Chuanjun Huang ◽  
Laifeng Li
Keyword(s):  
Shear Strength ◽  
Glass Fibre ◽  
Cryogenic Temperature ◽  
Interlaminar Shear Strength ◽  
Epoxy Composites ◽  
Matrix Modification ◽  
Glass Fibre Reinforced ◽  
Interlaminar Shear

Role of matrix modification on interlaminar shear strength of glass fibre/epoxy composites

2012 ◽  
Vol 43 (1) ◽  
pp. 95-98 ◽  
Author(s):  
Yu Liu ◽  
Jiao-Ping Yang ◽  
Hong-Mei Xiao ◽  
Cheng-Bing Qu ◽  
Qing-Ping Feng ◽  
...  
Keyword(s):  
Shear Strength ◽  
Glass Fibre ◽  
Interlaminar Shear Strength ◽  
Epoxy Composites ◽  
Matrix Modification ◽  
Interlaminar Shear

The Interlaminar Shear Strength Test of Helical Wound Glass Fibre Reinforced Epoxy Laminates Subjected to Hydrothermal Ageing

2014 ◽  
Vol 554 ◽  
pp. 391-395
Author(s):  
M.S. Abdul Majid ◽  
Mohd Afendi ◽  
R. Daud ◽  
N.A.M. Amin ◽  
Azizul Mohamad ◽  
...  
Keyword(s):  
Shear Strength ◽  
Glass Fibre ◽  
Mechanical Test ◽  
Monitoring Program ◽  
Interlaminar Shear Strength ◽  
Test Method ◽  
Internal Quality ◽  
Glass Fibre Reinforced ◽  
Interlaminar Shear ◽  
Composite Pipes

This paper presents the experimental investigation of interlaminar shear strength (ILSS) tests of helical wound glass fibre reinforced epoxy (GRE) pipes subjected to hydrothermal ageing. Currently, the test is being used by composite pipes manufacturers as the alternative internal quality monitoring program for detection of manufacturing changes and reconfirmation of the design basis of composite pipes. The test specimens were cut in hoop direction from helically wound GRE composite pipes after exposure of 0, 250, 500, 1000-hour water at 80°C. The ILSS tests of the GRE samples were then conducted in accordance with ASTM D2344, and the results were analyzed to evaluate the durability performance of the laminates. The results show a clear degradation in the bonding strength between fibres and resin system interface after 500-1000-hour water exposure at 80°C. This findings show a good agreement in the trend observed with the standard qualification procedure elucidated in ASTM D2992 standard. Hence, ILSS test shows a great potential to be used as the internal short-term mechanical test method to qualify a new resin, curing agent or glass fibre in accordance to the next approach.

Low-temperature interlaminar shear strength of reactor irradiated glass-fibre-reinforced laminates

Cryogenics ◽  
1996 ◽  
Vol 36 (8) ◽  
pp. 611-617 ◽  
Author(s):  
K. Humer ◽  
S. Spieβberger ◽  
H.W. Weber ◽  
E.K. Tschegg ◽  
H. Gerstenberg
Keyword(s):  
Shear Strength ◽  
Low Temperature ◽  
Glass Fibre ◽  
Interlaminar Shear Strength ◽  
Glass Fibre Reinforced ◽  
Interlaminar Shear

Surface and Composite Interface of Carbon Fiber Modified by Grafting of Diethanolamine

2009 ◽  
Vol 79-82 ◽  
pp. 497-500 ◽  
Author(s):  
Lei Chen ◽  
Zhi Wei Xu ◽  
Jia Lu Li ◽  
Xiao Qing Wu ◽  
Li Chen
Keyword(s):  
Shear Strength ◽  
Carbon Fiber ◽  
Functional Groups ◽  
Carbon Fibers ◽  
Irradiation Dose ◽  
Interlaminar Shear Strength ◽  
Epoxy Composites ◽  
Composite Interface ◽  
Γ Ray ◽  
Interlaminar Shear

The γ-ray co-irradiation method was employed to study the effect of diethanolamine modification on the surface of carbon fiber (CF) and the interfacial properties of CF/epoxy composites. Compared with the original carbon fiber, the surface of modified fibers became rougher. The amount of oxygen-containing functional groups was increased and the nitrogen element was detected after irradiation grafting. The interlaminar shear strength (ILSS) of composites reinforced by carbon fibers irradiated in diethanolamine solution was increased and then decreased as the irradiation dose increased. The ILSS of CF/epoxy composites was enhanced by 16.1% at 200kGy dose, compared with that of untreated one. The γ-ray irradiation grafting is expected to be a promising method for the industrialized modification of carbon fibers.

scholarly journals Directional Interlaminar Shear Strength (ILSS) of nano-modified epoxy/unidirectional glass fibre composite

2018 ◽  
Vol 5 (4) ◽  
pp. 603-613
Author(s):  
M. Rajanish ◽  
◽  
N. V. Nanjundaradhya ◽  
Ramesh S. Sharma ◽  
H. K. Shivananda ◽  
...  
Keyword(s):  
Shear Strength ◽  
Glass Fibre ◽  
Fibre Composite ◽  
Interlaminar Shear Strength ◽  
Unidirectional Glass ◽  
Interlaminar Shear ◽  
Modified Epoxy ◽  
Glass Fibre Composite
Sign in / Sign up

Export Citation Format

Share Document