Mechanical and thermal properties of ABS/montmorillonite nanocomposites for fused deposition modeling 3D printing

2016 ◽  
Vol 102 ◽  
pp. 276-283 ◽  
Author(s):  
Zixiang Weng ◽  
Jianlei Wang ◽  
T. Senthil ◽  
Lixin Wu
Keyword(s):  
Thermal Properties ◽  
3D Printing ◽  
Fused Deposition Modeling ◽  
Mechanical And Thermal Properties ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Montmorillonite Nanocomposites

Silane-Treated Muscovite as Reinforcement for 3D-Printed ABS via Fused Deposition Modeling

2021 ◽  
Vol 877 ◽  
pp. 67-72
Author(s):  
Niño B. Felices ◽  
Bryan B. Pajarito
Keyword(s):  
Thermal Properties ◽  
Fused Deposition Modeling ◽  
Acrylonitrile Butadiene Styrene ◽  
Mechanical And Thermal Properties ◽  
Scanning Calorimetry ◽  
Mechanical Reinforcement ◽  
Fused Deposition ◽  
The Matrix ◽  
Deposition Modeling ◽  
3D Printed

Epoxysilane-treated muscovite (ETM) was used as reinforcing filler to 3D-printed acrylonitrile butadiene styrene (ABS) via fused deposition modeling (FDM). Its effects to the mechanical and thermal properties of ABS were investigated. ETM was loaded at 1, 3, and 5wt%. ABS/ETM composites were characterized via scanning electron microscopy (SEM), tensile test, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Mechanical reinforcement of ABS was observed for ABS/ETM composites loaded at 1 and 3 wt% wherein it was noted that the tensile strength and elastic modulus increased by up to 83.6% and 76.6%, respectively. Reinforcement was brought by interfacial adhesion of ETM with the ABS matrix. There was a sharp decline in mechanical properties for ABS/ETM composites loaded at 5wt% due to agglomeration of ETM in the matrix and discontinuities in the printed layers. The glass transition temperature (Tg) of ABS increased and the onset of its degradation shifted towards higher temperatures with the addition of ETM. It can be concluded that the addition of ETM to ABS for FDM 3D printing improved its mechanical and thermal properties.

Effect of Silane-Treated Wollastonite on Mechanical and Thermal Properties of 3D-Printed ABS via Fused Deposition Modeling

2021 ◽  
Vol 877 ◽  
pp. 61-66
Author(s):  
Niño B. Felices ◽  
Bryan B. Pajarito
Keyword(s):  
Thermal Properties ◽  
Fused Deposition Modeling ◽  
Acrylonitrile Butadiene Styrene ◽  
Filler Loading ◽  
Mechanical And Thermal Properties ◽  
Scanning Calorimetry ◽  
Fused Deposition ◽  
Uniform Dispersion ◽  
Deposition Modeling ◽  
3D Printed

The effect of the addition of epoxysilane-treated wollastonite (ETW) to the mechanical and thermal properties of 3D-printed acrylonitrile butadiene styrene (ABS) via fused deposition modeling (FDM) was investigated. The loading of ETW was varied at 1, 3, and 5wt%. The 3D-printed composites were evaluated by scanning electron microscopy (SEM) tensile test, shore D hardness, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The addition of ETW increases the tensile strength, elastic modulus, and toughness of ABS by up to 46.6, 56.2, and 53.7 %, respectively. The shore D hardness increases with increasing ETW. Morphological analysis show that this improvement in mechanical properties is a result of the high aspect ratio of the fillers, the uniform dispersion of ETW in the ABS matrix, and the orientation of ETW particles toward the direction of tensile stress. The glass transition temperature (Tg) of the composites increases and the onset of degradation slightly shifted to higher temperature with an increase in filler loading. The addition of ETW to ABS matrix in FDM 3D printing improved the mechanical and thermal properties of ABS.

Biodegradable 3D Printed Polymer Microneedles for Transdermal Drug Delivery

2018 ◽  
Author(s):  
Michael A. Luzuriaga ◽  
Danielle R. Berry ◽  
John C. Reagan ◽  
Ronald A. Smaldone ◽  
Jeremiah J. Gassensmith
Keyword(s):  
Drug Delivery ◽  
3D Printing ◽  
Transdermal Drug Delivery ◽  
Fused Deposition Modeling ◽  
Fused Deposition ◽  
Modeling Software ◽  
Deposition Modeling ◽  
3D Printed ◽  
Microfabrication Technique ◽  
Mechanical Strengths

Biodegradable polymer microneedle (MN) arrays are an emerging class of transdermal drug delivery devices that promise a painless and sanitary alternative to syringes; however, prototyping bespoke needle architectures is expensive and requires production of new master templates. Here, we present a new microfabrication technique for MNs using fused deposition modeling (FDM) 3D printing using polylactic acid, an FDA approved, renewable, biodegradable, thermoplastic material. We show how this natural degradability can be exploited to overcome a key challenge of FDM 3D printing, in particular the low resolution of these printers. We improved the feature size of the printed parts significantly by developing a post fabrication chemical etching protocol, which allowed us to access tip sizes as small as 1 μm. With 3D modeling software, various MN shapes were designed and printed rapidly with custom needle density, length, and shape. Scanning electron microscopy confirmed that our method resulted in needle tip sizes in the range of 1 – 55 µm, which could successfully penetrate and break off into porcine skin. We have also shown that these MNs have comparable mechanical strengths to currently fabricated MNs and we further demonstrated how the swellability of PLA can be exploited to load small molecule drugs and how its degradability in skin can release those small molecules over time.

scholarly journals 3D Printing of Mini Tablets for Pediatric Use

2021 ◽  
Vol 14 (2) ◽  
pp. 143
Author(s):  
Julius Krause ◽  
Laura Müller ◽  
Dorota Sarwinska ◽  
Anne Seidlitz ◽  
Malgorzata Sznitowska ◽  
...  
Keyword(s):  
3D Printing ◽  
Fused Deposition Modeling ◽  
Dosage Forms ◽  
Small Scale ◽  
Fused Deposition ◽  
On Demand ◽  
Pediatric Diseases ◽  
Deposition Modeling ◽  
Manufacturing Techniques ◽  
Pediatric Use

In the treatment of pediatric diseases, suitable dosages and dosage forms are often not available for an adequate therapy. The use of innovative additive manufacturing techniques offers the possibility of producing pediatric dosage forms. In this study, the production of mini tablets using fused deposition modeling (FDM)-based 3D printing was investigated. Two pediatric drugs, caffeine and propranolol hydrochloride, were successfully processed into filaments using hyprolose and hypromellose as polymers. Subsequently, mini tablets with diameters between 1.5 and 4.0 mm were printed and characterized using optical and thermal analysis methods. By varying the number of mini tablets applied and by varying the diameter, we were able to achieve different release behaviors. This work highlights the potential value of FDM 3D printing for the on-demand production of patient individualized, small-scale batches of pediatric dosage forms.

Influence of Part Orientation on the Surface Roughness in the Process of Fused Deposition Modeling

2021 ◽  
Vol 896 ◽  
pp. 29-37
Author(s):  
Ján Milde ◽  
František Jurina ◽  
Jozef Peterka ◽  
Patrik Dobrovszký ◽  
Jakub Hrbál ◽  
...  
Keyword(s):  
Surface Roughness ◽  
3D Printing ◽  
Fused Deposition Modeling ◽  
Orientation Angle ◽  
Acrylonitrile Butadiene Styrene ◽  
Lower Surface ◽  
Geometrical Model ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Part Orientation

The article focused on the influence of part orientation on the surface roughness of cuboid parts during the process of fabricating by FDM technology. The components, in this case, is simple cuboid part with the dimensions 15 mm x 15mm x 30 mm. A geometrical model is defined that considers the shape of the material filaments after deposition, to define a theoretical roughness profile, for a certain print orientation angle. Five different print orientations in the X-axis of the cuboid part were set: 0°, 30°, 45°, 60°, and 90°. According to previous research in the field of FDM technology by the author, the internal structure (infill) was set at the value of 70%. The method of 3D printing was the Fused Deposition Modeling (FDM) and the material used in this research was thermoplastic ABS (Acrylonitrile butadiene styrene). For each setting, there were five specimens (twenty five prints in total). Prints were fabricated on a Zortrax M200 3D printer. After the 3D printing, the surface “A” was investigated by portable surface roughness tester Mitutoyo SJ-210. Surface roughness in the article is shown in the form of graphs (Fig.7). Results show increase in part roughness with increasing degree of part orientation. When the direction of applied layers on the measured surface was horizontal, significant improvement in surface roughness was observed. Findings in this paper can be taken into consideration when designing parts, as they can contribute in achieving lower surface roughness values.

Understanding and improving FDM 3D printing to fabricate high-resolution and optically transparent microfluidic devices

Lab on a Chip ◽  
2021 ◽  
Author(s):  
Reverson Fernandes Quero ◽  
Gessica Domingos Silveira ◽  
Jose Alberto Fracassi da Silva ◽  
Dosil Pereira de Jesus
Keyword(s):  
High Resolution ◽  
3D Printing ◽  
Fused Deposition Modeling ◽  
Microfluidic Devices ◽  
Fused Deposition ◽  
Optically Transparent ◽  
Deposition Modeling

The fabrication of microfluidic devices through Fused Deposition Modeling (FDM) 3D printing has faced several challenges, mainly regarding obtaining microchannels with suitable transparency and sizes. Thus, the use of this...

Hochproduktiver fertigungsangepasster 3D-Druck/Productive and manufacturing adjusted 3D printing

2017 ◽  
Vol 107 (07-08) ◽  
pp. 520-523
Author(s):  
J. Prof. Bliedtner ◽  
M. Schilling
Keyword(s):  
3D Printing ◽  
Research And Development ◽  
Fused Deposition Modeling ◽  
Dynamic Properties ◽  
Development Project ◽  
Efficient Production ◽  
Large Format ◽  
Printing Process ◽  
Fused Deposition ◽  
Deposition Modeling

Das FDM (Fused Deposition Modeling)-Verfahren ist aufgrund der Vielzahl von industriellen und privaten Anwendungen gegenwärtig das erfolgreichste 3D-Druck-Verfahren. Ziel des Forschungs- und Entwicklungsprojektes „HP3D“ ist die effiziente Herstellung von großformatigen Bauteilen in einem echten 3D-Verfahren aus frei wählbaren thermoplastischen Kunststoffen. An die Umsetzung des Projekts wurde sehr komplex herangegangen, um zu garantieren, dass die mechanischen und dynamischen Eigenschaften der aufgebauten Teile den konzipierten Eigenschaften entsprechen.   The FDM process is currently the most successful 3D printing process due to the multitude of industrial and private applications. The aim of the research and development project HP3D is the efficient production of large-format components in a real 3D process made of freely selectable thermoplastics. The implementation of the project has been very complex in order to ensure that the mechanical and dynamic properties of the assembled parts correspond to the designed properties.

Sign in / Sign up

Export Citation Format

Share Document