scholarly journals Criteria selection for a comparative study of functional performance of Fused Deposition Modelling and Vacuum Casting processes

2018 ◽  
Vol 35 ◽  
pp. 721-727 ◽  
Author(s):  
Ana Pilar Valerga Puerta ◽  
Daniel Moreno Sanchez ◽  
Moises Batista ◽  
Jorge Salguero
Keyword(s):  
Comparative Study ◽  
Functional Performance ◽  
Fused Deposition Modelling ◽  
Vacuum Casting ◽  
Fused Deposition ◽  
Selection For

scholarly journals Comparative study regarding the wear of gearwheels manufactured through additive technologies

2019 ◽  
Vol 290 ◽  
pp. 08001
Author(s):  
Daniel Besnea ◽  
Ciprian Rizescu ◽  
Edgar Moraru ◽  
Elena Dinu ◽  
Iolanda Panait
Keyword(s):  
Comparative Study ◽  
Experimental Research ◽  
Additive Technologies ◽  
Fused Deposition Modelling ◽  
Additive Technology ◽  
Mechanical Loads ◽  
Fused Deposition ◽  
Number Of Teeth ◽  
Constant Operation ◽  
Set Up

The article presents the results of the experimental research on the wear of gearwheels manufactured by an additive technology. It was realized eight gearwheels with the same module and number of teeth by means fused deposition modelling technology from different materials, including PLA, ABS, CarbonFil, nylon. In order to determine the teeth wear, pitting, thinning of teeth at the base in a gear that requires a continuous and constant operation, a demonstration set-up was designed and realized to highlight the mechanical loads of the eight gearwheels made by additive technologies.

Evaluation of geometrical benchmark artifacts containing multiple overhang lengths fabricated using material extrusion technique

2020 ◽  
Vol 14 (3) ◽  
pp. 7296-7308
Author(s):  
Siti Nur Humaira Mazlan ◽  
Aini Zuhra Abdul Kadir ◽  
N. H. A. Ngadiman ◽  
M.R. Alkahari
Keyword(s):  
3D Model ◽  
Laser Scanner ◽  
Dimensional Accuracy ◽  
Fused Deposition Modelling ◽  
Layer By Layer ◽  
Fused Deposition ◽  
Layer Technique ◽  
Subtractive Manufacturing ◽  
Manufacturing Features ◽  
Layer Problem

Fused deposition modelling (FDM) is a process of joining materials based on material entrusion technique to produce objects from 3D model using layer-by-layer technique as opposed to subtractive manufacturing. However, many challenges arise in the FDM-printed part such as warping, first layer problem and elephant food that was led to an error in dimensional accuracy of the printed parts especially for the overhanging parts. Hence, in order to investigate the manufacturability of the FDM printed part, various geometrical and manufacturing features were developed using the benchmarking artifacts. Therefore, in this study, new benchmarking artifacts containing multiple overhang lengths were proposed. After the benchmarking artifacts were developed, each of the features were inspected using 3D laser scanner to measure the dimensional accuracy and tolerances. Based on 3D scanned parts, 80% of the fabricated parts were fabricated within ±0.5 mm of dimensional accuracy as compared with the CAD data. In addition, the multiple overhang lengths were also successfully fabricated with a very significant of filament sagging observed.

scholarly journals Current State and Challenges of Natural Fibre-Reinforced Polymer Composites as Feeder in FDM-Based 3D Printing

Polymers ◽  
2021 ◽  
Vol 13 (14) ◽  
pp. 2289
Author(s):  
Nishata Royan Rajendran Royan ◽  
Jie Sheng Leong ◽  
Wai Nam Chan ◽  
Jie Ren Tan ◽  
Zainon Sharmila Binti Shamsuddin
Keyword(s):  
Mechanical Properties ◽  
Natural Fibre ◽  
Critical Discussion ◽  
Fused Deposition Modelling ◽  
Preparation Methods ◽  
Fused Deposition ◽  
Current State ◽  
Future Challenges ◽  
Raster Angle ◽  
Fibre Reinforced Polymer

As one of the fastest-growing additive manufacturing (AM) technologies, fused deposition modelling (FDM) shows great potential in printing natural fibre-reinforced composites (NFRC). However, several challenges, such as low mechanical properties and difficulty in printing, need to be overcome. Therefore, the effort to improve the NFRC for use in AM has been accelerating in recent years. This review attempts to summarise the current approaches of using NFRC as a feeder for AM. The effects of fibre treatments, composite preparation methods and addition of compatibilizer agents were analysed and discussed. Additionally, current methods of producing feeders from NFRCs were reviewed and discussed. Mechanical property of printed part was also dependent on the printing parameters, and thus the effects of printing temperature, layer height, infill and raster angle were discussed, and the best parameters reported by other researchers were identified. Following that, an overview of the mechanical properties of these composites as reported by various researchers was provided. Next, the use of optimisation techniques for NFRCs was discussed and analysed. Lastly, the review provided a critical discussion on the overall topic, identified all research gaps present in the use of NFRC for AM processes, and to overcome future challenges.

Additive manufacturing of an automotive brake pedal by metal fused deposition modelling

2021 ◽  
Author(s):  
M.I.M. Sargini ◽  
S.H. Masood ◽  
Suresh Palanisamy ◽  
Elammaran Jayamani ◽  
Ajay Kapoor
Keyword(s):  
Additive Manufacturing ◽  
Fused Deposition Modelling ◽  
Brake Pedal ◽  
Fused Deposition ◽  
Automotive Brake
Sign in / Sign up

Export Citation Format

Share Document