scholarly journals Effect of NaOH-EDTA extraction time on the degradation of phosphate compounds

Geoderma ◽  
2018 ◽  
Vol 324 ◽  
pp. 77-79 ◽  
Author(s):  
Xiaoqian Jiang ◽  
Yuji Arai
Keyword(s):  
Extraction Time ◽  
Edta Extraction ◽  
Phosphate Compounds

PENGARUH PELARUT KLOROFORM DALAM PEMURNIAN GLISEROL DENGAN PROSES ASIDIFIKASI ASAM KLORIDA

2016 ◽  
Vol 5 (3) ◽  
pp. 38-43
Author(s):  
Windi Monica Surbakti ◽  
Gerson Rico M.H ◽  
Mersi Suriani Sinaga
Keyword(s):  
Fatty Acid ◽  
Volume Ratio ◽  
Biodiesel Production ◽  
Extraction Time ◽  
Glycerol Concentration ◽  
Purification Process ◽  
Soap Content ◽  
Test Volume ◽  
Base Content ◽  
Water Salt

Glycerol as a byproduct of biodiesel production was approximately formed 10% of the biodiesel weight. Impurities which contained in the glycerol such as catalyst, soap, methanol, water, salt, and matter organic non glycerol (MONG) have a significant effect on the glycerol concentration. So, it is necessary to treat the impurities. The purpose of this study is to know the effect of chloroform to glycerol purification process with acidification method using hydrochloric acid as pretreatment process. This research was begun with acid addition to the glycerol to neutralize the base content and to split the soap content into free fatty acid and salt, that are more easily separated from glycerol. Then the process was continued with extraction by the solvent chloroform using the variable of test volume ratio (v/v) (1:1, 1:1.5, 1:2)  and the extraction time (20, 40, and 60 minutes). The results showed that the more volume of solvent used, gave less extraction time to produce high purity of glycerol. The highest purity produced in this study amounted to 90,9082% is obtained at the ratio of the volume solvent (v/v) 1:1 with extraction time 60 minutes.

Optimization of Extraction Parameters of Reverse Iontophoretic Determination of Blood Glucose in an Artificial Skin Model

2020 ◽  
Vol 16 (6) ◽  
pp. 722-737
Author(s):  
Cigdem Yengin ◽  
Emrah Kilinc ◽  
Fatma Gulay Der ◽  
Mehmet Can Sezgin ◽  
Ilayda Alcin
Keyword(s):  
Ionic Strength ◽  
Body Fluids ◽  
Extraction Time ◽  
Artificial Skin ◽  
Dialysis Membrane ◽  
Skin Model ◽  
Non Invasive ◽  
Electrode Distance ◽  
Experimental Parameters

Background: Reverse İontophoresis (RI) is one of the promising non-invasive technologies. It relies on the transition of low magnitude current through the skin and thus glucose measurement becomes possible as it is extracted from the surface during this porter current flow. Objective: This paper deals with the development and optimization of an RI determination method for glucose. CE dialysis membrane based artificial skin model was developed and the dependence of RI extraction on various experimental parameters was investigated. Method: Dependence of RI extraction performance on noble electrodes (platinum, silver, palladium, ruthenium, rhodium) was checked with CA, CV and DPV, in a wide pH and ionic strength range. Optimizations on inter-electrode distance, potential type and magnitude, extraction time, gel type, membrane MWCO, usage frequency, pretreatment, artificial body fluids were performed. Results: According to the optimized results, the inter-electrode distance was 7.0 mm and silver was the optimum noble metal. Optimum pH and ionic strength were achieved with 0.05M PBS at pH 7.4. Higher glucose yields were obtained with DPV, while CA and CV achieved almost the same levels. During CA, +0.5V achieved the highest glucose yield and higher potential even caused a decrease. Glucose levels could be monitored for 24 hours. CMC gel was the optimum collection media. Pretreated CE membrane with 12kD MWCO was the artificial skin model. Pretreatment affected the yields while its condition caused no significant difference. Except PBS solution (simulated as artificial plasma), among the various artificial simulated body fluids, intestinal juice formulation (AI) and urine formulation U2 were the optimum extraction media, respectively. Conclusion: In this study, various experimental parameters (pretereatment procedure, type and MWCO values of membranes, inter-electrode distance, electrode material, extraction medium solvents, ionic strength and pH, collection medium gel type, extraction potential type and magnitude, extraction time and etc) were optimized for the non-invasive RI determination of glucose in a CE dialysis membrane-based artificial skin model and various simulated artificial body fluids.

Response Surface Methodology towards Optimization of Calotropis Procera Essential oil Extraction by using Supercritical CO2.

2019 ◽  
Vol 09 ◽  
Author(s):  
Hossein Zaeri ◽  
Bahareh Kamyab Moghadas ◽  
Bijan Honarvar ◽  
Ali Shokuhi Rad
Keyword(s):  
Response Surface Methodology ◽  
Essential Oil ◽  
Response Surface ◽  
Extraction Time ◽  
Calotropis Procera ◽  
Retrieval Rate ◽  
The Family ◽  
Effects Of Temperature ◽  
Carbon Dioxide Co2 ◽  
Central Composite

: In this research, the extraction of essential oil from Calotropis Procera with the family name of Asclepiadaceae, by supercritical carbon dioxide (CO2) solvent has been investigated in detail, and the yield and chemical profile of the extracts achieved by this method were compared with those resulted by the conventional Hydro distillation method. To optimize the process parameters of CO2 supercritical extraction (SCE) of the Calotropis Procera, the Response Surface Methodology (RSM) with central composite design (CCD) was employed. The effects of temperature, pressure, and extraction time on the oil yield are considered for investigation. Results showed that the data were sufficiently fitted into the second-order polynomial model. The extraction conditions, including pressure, temperature, and extraction time, were studied between 150-200 bar, 40-50 ºC, and 50-100 min, respectively. The optimal conditions are achieved as the temperature of 47.19ºC, the pressure of 172.2 bar, and time of 86 minutes with the retrieval rate of 31.39%.

Supercritical CO2 Extraction of Rhizoma Atractylodis macrocephalae

2012 ◽  
Vol 549 ◽  
pp. 60-64
Author(s):  
Zhen Huang ◽  
Xiao Han Shi ◽  
Shao Fang Liu ◽  
Wei Juan Jiang
Keyword(s):  
Particle Size ◽  
Orthogonal Array ◽  
Time Pressure ◽  
Extraction Yield ◽  
Extraction Time ◽  
Time Varying ◽  
Orthogonal Array Design ◽  
Array Design ◽  
Different Sources

An orthogonal array design was employed for optimizing the supercritical CO2 extraction of Rhizoma Atractylodis Macrocephalae. The extraction was performed at temperature from 40 to 60oC, pressure from 15 to 35MPa, extraction time varying from 30 to 90min and particle size spanning from 20 to 80 mesh. The results reflect that the extraction yield is more significantly influenced by the extraction time, pressure and particle size but less by temperature. The experiments show that the extraction yield obviously increases with increasing pressure, different from the literatures. In terms of the sample origin, a comparison shows that outstanding differences exist among the extraction yields from different sources.

scholarly journals Changes in Amino Acid Profiles and Bioactive Compounds of Thai Silk Cocoons as Affected by Water Extraction

Molecules ◽  
2021 ◽  
Vol 26 (7) ◽  
pp. 2033
Author(s):  
Chuleeporn Bungthong ◽  
Sirithon Siriamornpun
Keyword(s):  
Amino Acids ◽  
Amino Acid ◽  
Biological Activities ◽  
Radical Scavenging Activity ◽  
Radical Scavenging ◽  
Silk Protein ◽  
Extraction Time ◽  
Antioxidant Power ◽  
Silk Cocoon ◽  
Amino Acid Profiles

Silk proteins have many advantageous components including proteins and pigments. The proteins—sericin and fibroin—have been widely studied for medical applications due to their good physiochemical properties and biological activities. Various strains of cocoon display different compositions such as amino-acid profiles and levels of antioxidant activity. Therefore, the objectives of this study were to find a suitable silk protein extraction method to obtain products with chemical and biological properties suitable as functional foods in two strains of Bombyx mori silk cocoon (Nangsew strains; yellow cocoon) and Samia ricini silk cocoon (Eri strains; white cocoon) extracted by water at 100 °C for 2, 4, 6 and 8 h. The results showed that Nangsew strains extracted for 6 h contained the highest amounts of protein, amino acids, total phenolics (TPC) and total flavonoids (TFC), plus DPPH radical-scavenging activity, ABTS radical scavenging capacity, and ferric reducing antioxidant power (FRAP), anti-glycation, α-amylase and α-glucosidase inhibition. The longer extraction time produced higher concentrations of amino acids, contributing to sweet and umami tastes in both silk strains. It seemed that the bitterness decreased as the extraction time increased, resulting in improvements in the sweetness and umami of silk-protein extracts.

scholarly journals Optimization of Betalain Pigments Extraction Using Beetroot by-Products as a Valuable Source

Inventions ◽  
2021 ◽  
Vol 6 (3) ◽  
pp. 50
Author(s):  
Silvia Lazăr (Mistrianu) ◽  
Oana Emilia Constantin ◽  
Nicoleta Stănciuc ◽  
Iuliana Aprodu ◽  
Constantin Croitoru ◽  
...  
Keyword(s):  
Citric Acid ◽  
Acid Concentration ◽  
Ethanol Concentration ◽  
Extraction Process ◽  
Extraction Time ◽  
Quadratic Model ◽  
Citric Acid Concentration ◽  
Operating Variables ◽  
Conventional Solvent Extraction ◽  
Optimized Conditions

(1) Background: This study is designed to extract the bioactive compounds from beetroot peel for future use in the food industry. (2) Methods: Spectrophotometry techniques analyzed the effect of conventional solvent extraction on betalains and polyphenolic compounds from beetroot peels. Several treatments by varying for factors (ethanol and citric acid concentration, temperature, and time) were applied to the beetroot peel samples. A Central Composite Design (CCD) has been used to investigate the effect of the extraction parameters on the extraction steps and optimize the betalains and total polyphenols extraction from beetroot. A quadratic model was suggested for all the parameters analyzed and used. (3) Results: The maximum and minimum variables investigated in the experimental plan in the coded form are citric acid concentration (0.10–1.5%), ethanol concentration (10–50%), operating temperature (20–60 °C), and extraction time (15–50 min). The experimental design revealed variation in betalain content ranging from 0.29 to 1.44 mg/g DW, and the yield of polyphenolic varied from 1.64 to 2.74 mg/g DW. The optimized conditions for the maximum recovery of betalains and phenols were citric acid concentration 1.5%, ethanol concentration 50%, temperature 52.52 °C, and extraction time 49.9 min. (4) Conclusions: Overall, it can be noted that the extraction process can be improved by adjusting operating variables in order to maximize the model responses.

Sign in / Sign up

Export Citation Format

Share Document