Gas hydrate formation condition: Review on experimental and modeling approaches

2014 ◽  
Vol 379 ◽  
pp. 72-85 ◽  
Author(s):  
Sheida Shahnazar ◽  
Nurul Hasan
Keyword(s):  
Gas Hydrate ◽  
Hydrate Formation ◽  
Formation Condition ◽  
Modeling Approaches ◽  
Gas Hydrate Formation

scholarly journals Thermodynamic modeling of inhibitors’ role in preventing from gas hydrate formation in the pipelines

2015 ◽  
Vol 37 ◽  
pp. 86
Author(s):  
Fateme Sadat Mosavi Kakavand ◽  
Reihaneh Asachi
Keyword(s):  
Thermodynamic Modeling ◽  
Gas Hydrate ◽  
Hydrate Formation ◽  
Formation Condition ◽  
Acentric Factor ◽  
Specific Flow ◽  
Ambient Temperatures ◽  
Gas Hydrate Formation ◽  
Thermodynamic Conditions ◽  
Two Parameters

The existence of water beside gas has led to the creation of gas hydrate formation phenomenon in these pipelines. The phenomenon causes to basic financial and operational problems in the system. For this reason, the flow purpose of the present study was to simulate the formation condition in a specific flow and thermodynamic conditions and finally to provide the best possible solution to this problem. The Van Der Waals & Plague equation was used to thermodynamic modeling in the terms of temperature and pressure and the computer coding was carried out by MATLAB software. In addition, the results of Green & Perry study were used to utilize from physical characteristics, such as critical temperature, critical pressure, acentric factor and the temperature of quadruple points of elements forming hydrate .the results of this study indicated that increasing the concentration of inhibitor in system at the specified temperature, delay the hydrate formation. Moreover, temperature rising can also increase the effect of solvents. Therefore, two parameters of ambient temperatures in hot seasons or using heaters for pipelines can reduce the risk to a minimum in critical (sensitive) points. Finally, the used model in this design which has had some changes in variables properly can see the needs and meanwhile it is usable for other similar changes by a brief change.

Thermodynamic Modelling of Gas Hydrate Formation in the Presence of Inhibitors and the Consideration of their Effect

2014 ◽  
Vol 14 (1) ◽  
pp. 45
Author(s):  
Peyman Sabzi ◽  
Saheb Noroozi
Keyword(s):  
Gas Hydrates ◽  
Gas Hydrate ◽  
Low Temperatures ◽  
Hydrate Formation ◽  
Transportation Systems ◽  
Flow Lines ◽  
Main Approach ◽  
Efficient Inhibitor ◽  
System A ◽  
Gas Hydrate Formation

Gas hydrates formation is considered as one the greatest obstacles in gas transportation systems. Problems related to gas hydrate formation is more severe when dealing with transportation at low temperatures of deep water. In order to avoid formation of Gas hydrates, different inhibitors are used. Methanol is one of the most common and economically efficient inhibitor. Adding methanol to the flow lines, changes the thermodynamic equilibrium situation of the system. In order to predict these changes in thermodynamic behavior of the system, a series of modelings are performed using Matlab software in this paper. The main approach in this modeling is on the basis of Van der Waals and Plateau's thermodynamic approach. The obtained results of a system containing water, Methane and Methanol showed that hydrate formation pressure increases due to the increase of inhibitor amount in constant temperature and this increase is more in higher temperatures. Furthermore, these results were in harmony with the available empirical data.Keywords: Gas hydrates, thermodynamic inhibitor, modelling, pipeline blockage

scholarly journals Rapid Gas Hydrate Formation—Evaluation of Three Reactor Concepts and Feasibility Study

Molecules ◽  
2021 ◽  
Vol 26 (12) ◽  
pp. 3615
Author(s):  
Florian Filarsky ◽  
Julian Wieser ◽  
Heyko Juergen Schultz
Keyword(s):  
Gas Hydrates ◽  
Gas Hydrate ◽  
Hydrate Formation ◽  
Synthetic Natural Gas ◽  
Operation Conditions ◽  
Gas Hydrate Formation ◽  
Gas Conditioning ◽  
And Storage ◽  
Economic Considerations ◽  
High Storage

Gas hydrates show great potential with regard to various technical applications, such as gas conditioning, separation and storage. Hence, there has been an increased interest in applied gas hydrate research worldwide in recent years. This paper describes the development of an energetically promising, highly attractive rapid gas hydrate production process that enables the instantaneous conditioning and storage of gases in the form of solid hydrates, as an alternative to costly established processes, such as, for example, cryogenic demethanization. In the first step of the investigations, three different reactor concepts for rapid hydrate formation were evaluated. It could be shown that coupled spraying with stirring provided the fastest hydrate formation and highest gas uptakes in the hydrate phase. In the second step, extensive experimental series were executed, using various different gas compositions on the example of synthetic natural gas mixtures containing methane, ethane and propane. Methane is eliminated from the gas phase and stored in gas hydrates. The experiments were conducted under moderate conditions (8 bar(g), 9–14 °C), using tetrahydrofuran as a thermodynamic promoter in a stoichiometric concentration of 5.56 mole%. High storage capacities, formation rates and separation efficiencies were achieved at moderate operation conditions supported by rough economic considerations, successfully showing the feasibility of this innovative concept. An adapted McCabe-Thiele diagram was created to approximately determine the necessary theoretical separation stage numbers for high purity gas separation requirements.

Sign in / Sign up

Export Citation Format

Share Document