Thermodynamic Modelling of Gas Hydrate Formation in the Presence of Inhibitors and the Consideration of their Effect

2014 ◽  
Vol 14 (1) ◽  
pp. 45
Author(s):  
Peyman Sabzi ◽  
Saheb Noroozi
Keyword(s):  
Gas Hydrates ◽  
Gas Hydrate ◽  
Low Temperatures ◽  
Hydrate Formation ◽  
Transportation Systems ◽  
Flow Lines ◽  
Main Approach ◽  
Efficient Inhibitor ◽  
System A ◽  
Gas Hydrate Formation

Gas hydrates formation is considered as one the greatest obstacles in gas transportation systems. Problems related to gas hydrate formation is more severe when dealing with transportation at low temperatures of deep water. In order to avoid formation of Gas hydrates, different inhibitors are used. Methanol is one of the most common and economically efficient inhibitor. Adding methanol to the flow lines, changes the thermodynamic equilibrium situation of the system. In order to predict these changes in thermodynamic behavior of the system, a series of modelings are performed using Matlab software in this paper. The main approach in this modeling is on the basis of Van der Waals and Plateau's thermodynamic approach. The obtained results of a system containing water, Methane and Methanol showed that hydrate formation pressure increases due to the increase of inhibitor amount in constant temperature and this increase is more in higher temperatures. Furthermore, these results were in harmony with the available empirical data.Keywords: Gas hydrates, thermodynamic inhibitor, modelling, pipeline blockage

Modeling of Gas Hydrate Formation in a High Pressure Reactor

2008 ◽  
Vol 6 (1) ◽  
Author(s):  
Ajay Mandal ◽  
Sukumar Laik
Keyword(s):  
Kinetic Model ◽  
Gas Hydrates ◽  
Gas Hydrate ◽  
Oil And Gas ◽  
Hydrate Formation ◽  
System A ◽  
Gas Hydrate Formation ◽  
Simple Kinetic Model ◽  
Geometric Variables ◽  
Order Rate Equation

Gas hydrates are now gaining importance in oil and gas industries because they are considered a future source of energy and a means for the transport of natural gas. On the other hand gas hydrates create problems by plugging the pipelines during transportation. Obviously, predicting the conditions in which hydrates are formed would be valuable. In the present study, experiments were performed to observe the conditions, which favor the formation of an ethane gas hydrate. The results of the hydrate formation are elucidated with the help of a conceptual kinetic model. An empirical correlation is developed to predict the rate of formation of the hydrate in terms of the operating and geometric variables of the system. A simple kinetic model based on the dissolved ethane gas is also developed which shows that the hydrate formation follows the first order rate equation.

scholarly journals Rapid Gas Hydrate Formation—Evaluation of Three Reactor Concepts and Feasibility Study

Molecules ◽  
2021 ◽  
Vol 26 (12) ◽  
pp. 3615
Author(s):  
Florian Filarsky ◽  
Julian Wieser ◽  
Heyko Juergen Schultz
Keyword(s):  
Gas Hydrates ◽  
Gas Hydrate ◽  
Hydrate Formation ◽  
Synthetic Natural Gas ◽  
Operation Conditions ◽  
Gas Hydrate Formation ◽  
Gas Conditioning ◽  
And Storage ◽  
Economic Considerations ◽  
High Storage

Gas hydrates show great potential with regard to various technical applications, such as gas conditioning, separation and storage. Hence, there has been an increased interest in applied gas hydrate research worldwide in recent years. This paper describes the development of an energetically promising, highly attractive rapid gas hydrate production process that enables the instantaneous conditioning and storage of gases in the form of solid hydrates, as an alternative to costly established processes, such as, for example, cryogenic demethanization. In the first step of the investigations, three different reactor concepts for rapid hydrate formation were evaluated. It could be shown that coupled spraying with stirring provided the fastest hydrate formation and highest gas uptakes in the hydrate phase. In the second step, extensive experimental series were executed, using various different gas compositions on the example of synthetic natural gas mixtures containing methane, ethane and propane. Methane is eliminated from the gas phase and stored in gas hydrates. The experiments were conducted under moderate conditions (8 bar(g), 9–14 °C), using tetrahydrofuran as a thermodynamic promoter in a stoichiometric concentration of 5.56 mole%. High storage capacities, formation rates and separation efficiencies were achieved at moderate operation conditions supported by rough economic considerations, successfully showing the feasibility of this innovative concept. An adapted McCabe-Thiele diagram was created to approximately determine the necessary theoretical separation stage numbers for high purity gas separation requirements.

scholarly journals Investigation on Gas Hydrates Formation and Dissociation in Multiphase Gas Dominant Transmission Pipelines

2020 ◽  
Vol 10 (15) ◽  
pp. 5052 ◽  
Author(s):  
Sayani Jai Krishna Sahith ◽  
Srinivasa Rao Pedapati ◽  
Bhajan Lal
Keyword(s):  
Crude Oil ◽  
Phase Behavior ◽  
Gas Hydrates ◽  
Gas Hydrate ◽  
Formation Rate ◽  
Water System ◽  
Hydrate Formation ◽  
Multiphase System ◽  
Gas Hydrate Formation ◽  
Water Cut

In this work, a gas hydrate formation and dissociation study was performed on two multiphase pipeline systems containing gasoline, CO2, water, and crude oil, CO2, water, in the pressure range of 2.5–3.5 MPa with fixed water cut as 15% using gas hydrate rocking cell equipment. The system has 10, 15 and 20 wt.% concentrations of gasoline and crude oil, respectively. From the obtained hydrate-liquid-vapor-equilibrium (HLVE) data, the phase diagrams for the system are constructed and analyzed to represent the phase behavior in the multiphase pipelines. Similarly, induction time and rate of gas hydrate formation studies were performed for gasoline, CO2, and water, and crude oil, CO2, water system. From the evaluation of phase behavior based on the HLVE curve, the multiphase system with gasoline exhibits an inhibition in gas hydrates formation, as the HLVE curve shifts towards the lower temperature and higher-pressure region. The multiphase system containing the crude oil system shows a promotion of gas hydrates formation, as the HLVE curve shifted towards the higher temperature and lower pressure. Similarly, the kinetics of hydrate formation of gas hydrates in the gasoline system is slow. At the same time, crude oil has a rapid gas hydrate formation rate.

Insights into CO2 Capture by Flue Gas Hydrate Formation: Gas Composition Evolution in Systems Containing Gas Hydrates and Gas Mixtures at Stable Pressures

2018 ◽  
Vol 6 (5) ◽  
pp. 5732-5736 ◽  
Author(s):  
Aliakbar Hassanpouryouzband ◽  
Jinhai Yang ◽  
Bahman Tohidi ◽  
Evgeny Chuvilin ◽  
Vladimir Istomin ◽  
...  
Keyword(s):  
Co2 Capture ◽  
Gas Hydrates ◽  
Gas Hydrate ◽  
Flue Gas ◽  
Hydrate Formation ◽  
Gas Mixtures ◽  
Gas Composition ◽  
Gas Hydrate Formation

Numerical Studies of Gas Hydrate Formation and Decomposition in a Geological Reservoir

2008 ◽  
Vol 130 (3) ◽  
Author(s):  
M. Uddin ◽  
D. Coombe ◽  
D. Law ◽  
B. Gunter
Keyword(s):  
Kinetic Model ◽  
Gas Hydrates ◽  
Gas Hydrate ◽  
Co2 Sequestration ◽  
Numerical Study ◽  
Hydrate Formation ◽  
Gas Production ◽  
Ch4 Production ◽  
Hydrate Reservoir ◽  
Gas Hydrate Formation

Numerical modeling of gas hydrates can provide an integrated understanding of the various process mechanisms controlling methane (CH4) production from hydrates and carbon dioxide (CO2) sequestration as a gas hydrate in geologic reservoirs. This work describes a new unified kinetic model which, when coupled with a compositional thermal reservoir simulator, can simulate the dynamics of CH4 and CO2 hydrate formation and decomposition in a geological formation. The kinetic model contains two mass transfer equations: one equation converts gas and water into hydrate and the other equation decomposes hydrate into gas and water. The model structure and parameters were investigated in comparison with a previously published model. The proposed kinetic model was evaluated in two case studies. Case 1 considers a single well within a natural hydrate reservoir for studying the kinetics of CH4 and CO2 hydrate decomposition and formation. A close agreement was achieved between the present numerical simulations and results reported by Hong and Pooladi-Darvish (2003, “A Numerical Study on Gas Production From Formations Containing Gas Hydrates,” Petroleum Society’s Canadian International Petroleum Conference, Calgary, AB, Jun. 10–12, Paper No. 2003-060). Case 2 considers multiple wells within a natural hydrate reservoir for studying the unified kinetic model to demonstrate the feasibility of CO2 sequestration in a natural hydrate reservoir with potential enhancement of CH4 recovery. The model will be applied in future field-scale simulations to predict the dynamics of gas hydrate formation and decomposition processes in actual geological reservoirs.

scholarly journals Advances in the Study of Gas Hydrates by Dielectric Spectroscopy

Molecules ◽  
2021 ◽  
Vol 26 (15) ◽  
pp. 4459
Author(s):  
Ivan Lunev ◽  
Bulat Kamaliev ◽  
Valery Shtyrlin ◽  
Yuri Gusev ◽  
Airat Kiiamov ◽  
...  
Keyword(s):  
Gas Hydrates ◽  
Gas Hydrate ◽  
Dielectric Spectroscopy ◽  
Relaxation Times ◽  
Hydrate Formation ◽  
Water Molecules ◽  
Natural Gas Hydrate ◽  
Real Component ◽  
Local Structures ◽  
Gas Hydrate Formation

The influence of kinetic hydrate inhibitors on the process of natural gas hydrate nucleation was studied using the method of dielectric spectroscopy. The processes of gas hydrate formation and decomposition were monitored using the temperature dependence of the real component of the dielectric constant ε′(T). Analysis of the relaxation times τ and activation energy ΔE of the dielectric relaxation process revealed the inhibitor was involved in hydrogen bonding and the disruption of the local structures of water molecules.

Dynamics of the gas hydrate formation in a porous medium at the gas injection

2008 ◽  
Vol 6 ◽  
pp. 178-183
Author(s):  
M.K. Khasanov ◽  
N.G. Musakaev
Keyword(s):  
Porous Medium ◽  
Gas Hydrates ◽  
Gas Hydrate ◽  
Gas Injection ◽  
Hydrate Formation ◽  
Frontal Surface ◽  
Gas Hydrate Formation ◽  
Self Similar ◽  
Extended Area ◽  
Similar Solutions

The features of the gas hydrates formation at the gas injection into the porous medium initially saturated with gas and water are considered. Self-similar solutions of the axisymmetric problem describing the distribution of the main parameters in a reservoir are constructed. The solutions have been found according to which the gas hydrate formation can occur at the frontal surface or in the extended area.

scholarly journals Modeling of stability of gas hydrates under permafrost in an environment of surface climatic change – terrestrial case, Beaufort-Mackenzie basin, Canada

2011 ◽  
Vol 7 (5) ◽  
pp. 2863-2891
Author(s):  
J. Majorowicz ◽  
J. Šafanda ◽  
K. Osadetz
Keyword(s):  
Surface Temperature ◽  
Gas Hydrates ◽  
Gas Hydrate ◽  
Pore Space ◽  
Hydrate Formation ◽  
Type I ◽  
Depth Range ◽  
Mackenzie Basin ◽  
Gas Hydrate Formation ◽  
Heat Effects

Abstract. Modeling of the onset of permafrost formation and succeeding gas hydrate formation in the changing surface temperature environment has been done for the Beaufort-Mackenzie Basin (BMB). Numerical 1-D modeling is constrained by deep heat flow from deep well bottom hole temperatures, deep conductivity, present permafrost thickness and thickness of Type I gas hydrates. Latent heat effects were applied to the model for the entire ice bearing permafrost and Type I hydrate intervals. Modeling for a set of surface temperature forcing during the glacial-interglacial history including the last 14 Myr was performed. Two scenarios of gas formation were considered; case 1: formation of gas hydrate from gas entrapped under deep geological seals and case 2: formation of gas hydrate from gas in a free pore space simultaneously with permafrost formation. In case 1, gas hydrates could have formed at a depth of about 0.9 km only some 1 Myr ago. In case 2, the first gas hydrate formed in the depth range of 290–300 m shortly after 6 Myr ago when the GST dropped from −4.5 °C to −5.5. °C. The gas hydrate layer started to expand both downward and upward subsequently. These models show that the gas hydrate zone, while thinning persists under the thick body of BMB permafrost through the current interglacial warming periods.

Application of Silver Nanofluids on Kinetics of Sulfur Hexafluoride Gas Hydrate Formation

2020 ◽  
Vol 20 (9) ◽  
pp. 5473-5477 ◽  
Author(s):  
Dong Hyun Kim ◽  
Kyung Chan Kang ◽  
Seong Deok Seo ◽  
Seung Min Lee ◽  
Ji Won Jeong ◽  
...  
Keyword(s):  
Gas Hydrates ◽  
Gas Hydrate ◽  
Sulfur Hexafluoride ◽  
Salt Water ◽  
Hydrate Formation ◽  
Electrical Explosion ◽  
Material System ◽  
Water And Wastewater Treatment ◽  
Gas Hydrate Formation ◽  
Kinetics Of

Gas hydrates are nonstoichiometric nano-structured crystalline compounds which are stabilized by gas molecules incorporated in the cages made of hydrogen bonding of water molecules at suitable thermodynamic conditions. The gas hydrate as a technology has been successful for several potential applications in various engineering fields, such as, gas separation, carbon dioxide sequestration, gas storage and transportation, desalination of salt water and wastewater treatment. Recently, metal-based nanofluids are considered as interesting kinetic promoter candidates for accelerating formation of gas hydrates. Although organic-based kinetic promoters are widely studied for the rapid formation of gas hydrates, research of a new material system is still a challenge. In this study, Silver (Ag) nanofluids as kinetic promoter of sulfur hexafluoride (SF6) hydrate were prepared by electrical explosion of pure metal wire in deionized water. The kinetics of SF6 gas hydrates were evaluated with different concentration of Ag nanofluids at condition of 276 K and 0.7 MPa, respectively. The Ag nanofluids, as kinetic nano-prompter, showed excellent effect on the formation of SF6 hydrates.

Investigation of Drilling Problems in Gas Hydrate Formations

2008 ◽  
Author(s):  
Catalin Teodoriu ◽  
Gioia Falcone ◽  
Amodu Afolabi
Keyword(s):  
Gas Hydrates ◽  
Gas Hydrate ◽  
Oil And Gas ◽  
Drilling Fluid ◽  
Hydrate Formation ◽  
Oil And Gas Industry ◽  
Lessons Learned ◽  
Drilling Fluids ◽  
Drilling Mud ◽  
Gas Hydrate Formation

Gas hydrates are ice-like crystalline systems made of water and methane that are stable under high pressure and low temperature conditions. Gas hydrates have been identified as strategic resources and may surpass all known oil and gas reserves combined. However, these resources will become reserves only if the gas contained therein can be produced economically. In the oil and gas industry, gas hydrates may be encountered while drilling sediments of the subsea continental slopes and in the subsurface of permafrost regions. They also represent a flow assurance issue, as they may form in the well and in the flowlines, causing blockages. Deepwater drilling programmes have experienced problems when encountering gas hydrate formations. A major issue is that of phase transition, where gas hydrate goes from a solid state to dissociated gas and water, as there are rapid changes in fluid volumes and pressure. This can cause drilling equipment failure, borehole instability and formation collapse. After dissociation of water and gas, hydrates may be prevented from forming in the well by using appropriate inhibitors in the drilling mud. There is a need to develop fluids specifically for drilling through gas hydrate formations, either to unlock the unconventional reserves trapped in the crystalline gas hydrate structures or to safely reach underlying conventional reserves. To drill wells in a gas hydrate formation, a conductor casing is needed to allow close loop circulation of the mud, if different from seawater. The search for the ideal mud for drilling through gas hydrate formations must start with a review of past experiences worldwide and of the lessons learned. This paper presents a review of the problems encountered while drilling through gas hydrate formations. It identifies the key requirements for drilling fluids, based on the interaction between the drill bit, the drilling fluid and the formation. An evaluation of the environmental risk associated with drilling through gas hydrate formations is also presented.

Sign in / Sign up

Export Citation Format

Share Document