Electrochemical incineration of oxalic acid at boron doped diamond anodes: Role of operative parameters

2008 ◽  
Vol 53 (5) ◽  
pp. 2095-2108 ◽  
Author(s):  
Onofrio Scialdone ◽  
Alessandro Galia ◽  
Chiara Guarisco ◽  
Serena Randazzo ◽  
Giuseppe Filardo
Keyword(s):  
Oxalic Acid ◽  
Boron Doped Diamond ◽  
Boron Doped ◽  
Electrochemical Incineration

scholarly journals Low-coherence photonic method of electrochemical processes monitoring

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Monika Kosowska ◽  
Paweł Jakóbczyk ◽  
Michał Rycewicz ◽  
Alex Vitkin ◽  
Małgorzata Szczerska
Keyword(s):  
Electrochemical Process ◽  
Electrochemical Measurements ◽  
Boron Doped Diamond ◽  
Silica Substrate ◽  
Low Coherence ◽  
Optical Responses ◽  
Boron Doped ◽  
Fabry Perot ◽  
Hybrid Characterization

AbstractWe present an advanced multimodality characterization platform for simultaneous optical and electrochemical measurements of ferrocyanides. Specifically, we combined a fiber-optic Fabry–Perot interferometer with a three-electrode electrochemical setup to demonstrate a proof-of-principle of this hybrid characterization approach, and obtained feasibility data in its monitoring of electrochemical reactions in a boron-doped diamond film deposited on a silica substrate. The film plays the dual role of being the working electrode in the electrochemical reaction, as well as affording the reflectivity to enable the optical interferometry measurements. Optical responses during the redox reactions of the electrochemical process are presented. This work proves that simultaneous opto-electrochemical measurements of liquids are possible.

scholarly journals Role of Carboxyl and Amine Termination on a Boron-Doped Diamond Solution Gate Field Effect Transistor (SGFET) for pH Sensing

Sensors ◽  
2018 ◽  
Vol 18 (7) ◽  
pp. 2178 ◽  
Author(s):  
Shaili Falina ◽  
Sora Kawai ◽  
Nobutaka Oi ◽  
Hayate Yamano ◽  
Taisuke Kageura ◽  
...  
Keyword(s):  
Field Effect ◽  
Field Effect Transistor ◽  
Ph Sensing ◽  
Boron Doped Diamond ◽  
Boron Doped ◽  
Effect Transistor

scholarly journals On the Role of the Cathode for the Electro-oxidation of Perfluorooctanoic Acid

2020 ◽  
Author(s):  
Alicia Garcia-Costa ◽  
André Savall ◽  
Juan A. Zazo ◽  
Jose A. Casas ◽  
Karine Groenen Serrano
Keyword(s):  
Electrochemical Techniques ◽  
High Strength ◽  
Perfluorooctanoic Acid ◽  
Reduction Reaction ◽  
Adsorbed Hydrogen ◽  
Boron Doped Diamond ◽  
Bdd Anode ◽  
Boron Doped ◽  
Initial Ph

Perfluorooctanoic acid (PFOA), C7F15COOH, has been widely employed over the past fifty years, causing an environmental problem due to its dispersion and low biodegradability. Furthermore, the high stability of this molecule, conferred by the high strength of the C-F bond makes it very difficult to remove. In this work, electrochemical techniques are applied for PFOA degradation in view to study the influence of the cathode on defluorination. For this purpose, boron doped diamond (BDD), Pt, Zr and stainless steel have been tested as cathodes working with BDD anode at low electrolyte concentration (3.5 mM) to degrade PFOA at 100 mg/L. Among these cathodic materials, Pt improves the defluorination reaction. The electro-degradation of a PFOA molecule starts by a direct exchange of one electron at the anode and then follows a complex mechanism involving reaction with hydroxyl radicals and adsorbed hydrogen on the cathode. It is assumed that Pt acts as an electrocatalyst, enhancing PFOA defluorination by the reduction reaction of perfluorinated carbonyl intermediates on the cathode. The defluorinated intermediates are then more easily oxidized by HO• radicals. Hence, high mineralization (xTOC: 76.1%) and defluorination degrees (xF-: 58.6%) were reached with Pt working at current density j = 7.9 mA/cm2. This BDD-Pt system reaches a higher efficiency in terms of defluorination for a given electrical charge than previous works reported in literature. Influence of the electrolyte composition and initial pH are also explored.

Electro-oxidation of landfill leachate using boron-doped diamond: role of current density, pH and ions

2019 ◽  
Vol 79 (5) ◽  
pp. 921-928 ◽  
Author(s):  
F. Agustina ◽  
A. Y. Bagastyo ◽  
E. Nurhayati
Keyword(s):  
Current Density ◽  
Organic Content ◽  
Cod Removal ◽  
Boron Doped Diamond ◽  
Leachate Treatment ◽  
Ammonium Removal ◽  
Boron Doped ◽  
Wide Range ◽  
Electro Oxidation

Abstract Electro-oxidation using a boron-doped diamond (BDD) anode can be used as an alternative to leachate treatment. Aside from the hydroxyl radical, BDDs are capable of generating chloride and sulfate radical species that play significant roles in the oxidation of pollutants. This research investigated the role of Cl−:SO42− ions at molar ratios of 237:1, 4:1 and 18:1, and the influence of applied current density (i.e. 50, 75 and 100 mA cm−2) on the removal of organic and ammonium contaminants. The results show that current density had considerable effects on chemical oxygen demand (COD) and colour removal, while ion composition of Cl−:SO42− at pH 3, 5 and 8.5 (original pH) gave different effects on COD and ammonium removal. The pH had a significant effect on the COD removal at the ratio of 237:1, but showed no dramatic effect at the ratio of 18:1, giving ∼40% of COD removal at all pHs tested. This indicates that electro-oxidation at the ratio of 18:1 could be effectively conducted at a wide range of pH. Furthermore, the optimum ammonium removal was obtained at pH 8.5 with the ratio of 237:1. This process was found to be ineffective in increasing the biodegradability index of the leachate; instead, it exhibited mineralization of organic content.

scholarly journals On the Role of the Cathode for the Electro-Oxidation of Perfluorooctanoic Acid

Catalysts ◽  
2020 ◽  
Vol 10 (8) ◽  
pp. 902
Author(s):  
Alicia L. Garcia-Costa ◽  
Andre Savall ◽  
Juan A. Zazo ◽  
Jose A. Casas ◽  
Karine Groenen Serrano
Keyword(s):  
Electrochemical Techniques ◽  
High Strength ◽  
Perfluorooctanoic Acid ◽  
Reduction Reaction ◽  
Adsorbed Hydrogen ◽  
Boron Doped Diamond ◽  
Bdd Anode ◽  
Boron Doped ◽  
Initial Ph

Perfluorooctanoic acid (PFOA), C7F15COOH, has been widely employed over the past fifty years, causing an environmental problem because of its dispersion and low biodegradability. Furthermore, the high stability of this molecule, conferred by the high strength of the C-F bond makes it very difficult to remove. In this work, electrochemical techniques are applied for PFOA degradation in order to study the influence of the cathode on defluorination. For this purpose, boron-doped diamond (BDD), Pt, Zr, and stainless steel have been tested as cathodes working with BDD anode at low electrolyte concentration (3.5 mM) to degrade PFOA at 100 mg/L. Among these cathodic materials, Pt improves the defluorination reaction. The electro-degradation of a PFOA molecule starts by a direct exchange of one electron at the anode and then follows a complex mechanism involving reaction with hydroxyl radicals and adsorbed hydrogen on the cathode. It is assumed that Pt acts as an electrocatalyst, enhancing PFOA defluorination by the reduction reaction of perfluorinated carbonyl intermediates on the cathode. The defluorinated intermediates are then more easily oxidized by HO• radicals. Hence, high mineralization (xTOC: 76.1%) and defluorination degrees (xF−: 58.6%) were reached with Pt working at current density j = 7.9 mA/cm2. This BDD-Pt system reaches a higher efficiency in terms of defluorination for a given electrical charge than previous works reported in literature. Influence of the electrolyte composition and initial pH are also explored.

Distillery Wastewater Treated by Electrochemical Oxidation with Boron-Doped Diamond Electrodes

2011 ◽  
Vol 14 (2) ◽  
Author(s):  
Christian E. Alvarez-Pugliese ◽  
Paola Moreno-Wiedman ◽  
Fiderman Machuca-Martínez ◽  
Nilson Marriaga-Cabrales
Keyword(s):  
Electrochemical Oxidation ◽  
Linear Sweep Voltammetry ◽  
Direct Oxidation ◽  
Linear Sweep ◽  
Diamond Electrodes ◽  
Boron Doped Diamond ◽  
Boron Doped ◽  
Distillery Wastewater ◽  
Current Densities

AbstractElectrochemical oxidation of pretreated distillery wastewater was performed using a boron doped diamond anode (BDD). The role of direct oxidation of organic matter was assessed with experiments of linear sweep voltammetry, noting that the deactivation of the electrode surface occurs in the region of potentials below oxygen evolution. Then, galvanostatic bulk electrolyses were conducted during 4 hours at current densities (20 mAcm

Electrochemical incineration of vinasse in filter-press-type FM01-LC reactor using 3D BDD electrode

2008 ◽  
Vol 58 (12) ◽  
pp. 2413-2419 ◽  
Author(s):  
J. L. Nava ◽  
A. Recéndiz ◽  
J. C. Acosta ◽  
I. González
Keyword(s):  
Aqueous Media ◽  
Three Dimensional ◽  
Oxygen Demand ◽  
Electrochemical Reactor ◽  
Filter Press ◽  
Boron Doped Diamond ◽  
Diamond Electrode ◽  
Boron Doped ◽  
Boron Doped Diamond Electrode ◽  
Electrochemical Incineration

This work shows results obtained in the electrochemical incineration of a synthetic vinasse with initial chemical oxygen demand (COD) of 75.096 g L−1 in aqueous media (which resembles vinasse industrial wastewater). Electrolyses in a filter-press-type FM01-LC electrochemical reactor equipped with a three-dimensional (3D) boron doped diamond electrode (BDD) were performed at Reynolds values between 22 ≤ Re ≤ 109, and a fixed current density of 10 mA cm−2. The electrochemical incineration achieved up to 97% in vinasse mineralization with current efficiencies that surpass unity and energy consumption of 168 KW-h m−3, at Re =109. The mineralization of vinasse indicates that such degradation occurs via hydroxyl radicals formed by the oxidation of water on the BDD surface. Experimental data revealed that hydrodynamic conditions slightly influence the vinasse degradation rate and current efficiency, indicating that the oxidation involves a complex pathway.

Sign in / Sign up

Export Citation Format

Share Document