Modeling of fiber composite structures for the calculation of the structural intensity

2021 ◽  
Vol 262 ◽  
pp. 113631
Author(s):  
Pasquale Junior Capasso ◽  
Giuseppe Petrone ◽  
Nikolai Kleinfeller ◽  
Sergio De Rosa ◽  
Christian Adams
Keyword(s):  
Composite Structures ◽  
Fiber Composite ◽  
Structural Intensity

The effect of nanoparticle additive on surface milling in glass fiber reinforced composite structures

2021 ◽  
pp. 096739112110141
Author(s):  
Ferhat Ceritbinmez ◽  
Ahmet Yapici ◽  
Erdoğan Kanca
Keyword(s):  
Composite Materials ◽  
Glass Fiber ◽  
Composite Structures ◽  
Fiber Composite ◽  
Cutting Speed ◽  
Fiber Reinforced ◽  
Fiber Reinforced Composite ◽  
Reinforced Composite ◽  
Glass Fiber Reinforced ◽  
Composite Layers

In this study, the effect of adding nanosize additive to glass fiber reinforced composite plates on mechanical properties and surface milling was investigated. In the light of the investigations, with the addition of MWCNTs additive in the composite production, the strength of the material has been changed and the more durable composite materials have been obtained. Slots were opened with different cutting speed and feed rate parameters to the composite layers. Surface roughness of the composite layers and slot size were examined and also abrasions of cutting tools used in cutting process were determined. It was observed that the addition of nanoparticles to the laminated glass fiber composite materials played an effective role in the strength of the material and caused cutting tool wear.

Fiber Composite Strength Modeling With Extension to Life Prediction

2005 ◽  
Vol 128 (1) ◽  
pp. 41-49
Author(s):  
Edward M. Wu ◽  
John L. Kardos
Keyword(s):  
Composite Structures ◽  
Life Prediction ◽  
Failure Modes ◽  
Fiber Composite ◽  
Probability Model ◽  
Load Sharing ◽  
Local Load ◽  
Statistical Parameters ◽  
Composite Strength ◽  
Fiber Manufacturing

This paper focuses on the probability modeling of fiber composite strength, wherein the failure modes are dominated by fiber tensile failures. The probability model is the tri-modal local load-sharing model, which is the Phoenix-Harlow local load-sharing model with the filament failure model extended from one mode to three modes. This model results in increased efficiency in the determination of fiber statistical parameters and in lower cost when applied to (i) quality control in materials (fiber) manufacturing, (ii) materials (fiber) selection and comparison, (iii) accounting for the effect of size scaling in design, and (iv) qualification and certification of critical composite structures that are too large and expensive to test statistically. In addition, possible extensions to proof testing and time-dependent life prediction are discussed and preliminary data are presented.

scholarly journals Impact Damage Resistance and Post-Impact Tolerance of Optimum Banana-Pseudo-Stem-Fiber-Reinforced Epoxy Sandwich Structures

2020 ◽  
Vol 10 (2) ◽  
pp. 684 ◽  
Author(s):  
Mohamad Zaki Hassan ◽  
S. M. Sapuan ◽  
Zainudin A. Rasid ◽  
Ariff Farhan Mohd Nor ◽  
Rozzeta Dolah ◽  
...  
Keyword(s):  
Composite Structures ◽  
Sandwich Structures ◽  
Impact Damage ◽  
Fiber Composite ◽  
Peak Load ◽  
Weight Ratio ◽  
Synthetic Fiber ◽  
Damage Area ◽  
Banana Fibers ◽  
The Impact

Banana fiber has a high potential for use in fiber composite structures due to its promise as a polymer reinforcement. However, it has poor bonding characteristics with the matrixes due to hydrophobic–hydrophilic incompatibility, inconsistency in blending weight ratio, and fiber length instability. In this study, the optimal conditions for a banana/epoxy composite as determined previously were used to fabricate a sandwich structure where carbon/Kevlar twill plies acted as the skins. The structure was evaluated based on two experimental tests: low-velocity impact and compression after impact (CAI) tests. Here, the synthetic fiber including Kevlar, carbon, and glass sandwich structures were also tested for comparison purposes. In general, the results showed a low peak load and larger damage area in the optimal banana/epoxy structures. The impact damage area, as characterized by the dye penetration, increased with increasing impact energy. The optimal banana composite and synthetic fiber systems were proven to offer a similar residual strength and normalized strength when higher impact energies were applied. Delamination and fracture behavior were dominant in the optimal banana structures subjected to CAI testing. Finally, optimization of the compounding parameters of the optimal banana fibers improved the impact and CAI properties of the structure, making them comparable to those of synthetic sandwich composites.

Fiber composite structures

JOM ◽  
1975 ◽  
Vol 27 (5) ◽  
pp. 15-19
Author(s):  
M. J. Salkind
Keyword(s):  
Composite Structures ◽  
Fiber Composite

Shape Memory Composite Hands for Space Applications

2015 ◽  
Author(s):  
Fabrizio Quadrini ◽  
Giovanni Matteo Tedde ◽  
Loredana Santo
Keyword(s):  
Shape Memory ◽  
Composite Structures ◽  
Polymer Matrix Composites ◽  
Fiber Composite ◽  
Shape Memory Polymer ◽  
Small Scale ◽  
Carbon Fiber Composite ◽  
Space Applications ◽  
First Case ◽  
Shape Memory Composite

Shape memory composites combine structural properties of continuous-fiber polymer-matrix composites with functional behavior of shape memory polymers. In this study, the production of shape memory composite structures for aerospace applications is described. Small-scale grabbing systems were prototyped as they could be used for space cleaning operations. Composite hands were manufactured by using two carbon fiber composite layers with a shape memory polymer interlayer. They were produced in the closed-hand configuration and subsequently opened in the memorizing step. Due to heating, composites tended to recover the initial closed configuration, allowing to grab small objects. Two different shapes (cylindrical and cubic) were considered for composite hands. In the first case, the shape memory behavior was given to the entire structure whereas, in the second case, shape memory properties were provided only to folding zones. As a result, a good shape recovery was observed in both cases but part weight was already not negligible also in these small-scale systems.

Mechanical Properties of Biomimetic Leaf Composite

2016 ◽  
Author(s):  
Hamid Nayeb Hashemi ◽  
Gongdai Liu ◽  
Ashkan Vaziri ◽  
Masoud Olia ◽  
Ranajay Ghosh
Keyword(s):  
Mechanical Properties ◽  
Yield Stress ◽  
Poisson’S Ratio ◽  
Composite Structures ◽  
Volume Fraction ◽  
Fiber Composite ◽  
Poisson's Ratio ◽  
Closed Cell ◽  
Cell Architecture ◽  
The Matrix

In this paper, we mimic the venous morphology of a typical plant leaf into a fiber composite structure where the veins are replaced by stiff fibers and the rest of the leaf is idealized as an elastic perfectly plastic polymeric matrix. The variegated venations found in nature are idealized into three principal fibers — the central mid-fiber corresponding to the mid-rib, straight parallel secondary fibers attached to the mid-fiber representing the secondary veins and then another set of parallel fibers emanating from the secondary fibers mimicking the tertiary veins of a typical leaf. The tertiary fibers do not interconnect the secondary fibers in our present study. We carry out finite element (FE) based computational investigation of the mechanical properties such as Young’s moduli, Poisson’s ratio and yield stress under uniaxial loading of the resultant composite structures and study the effect of different fiber architectures. To this end, we use two broad types of architectures both having similar central main fiber but differing in either having only secondary fibers or additional tertiary fibers. The fiber and matrix volume fractions are kept constant and a comparative parametric study is carried out by varying the inclination of the secondary fibers. We find significant effect of fiber inclination on the overall mechanical properties of the composites with higher fiber angles transitioning the composite increasingly into a matrix-dominated response. We also find that in general, composites with only secondary fibers are stiffer with closed cell architecture of the secondary fibers. The closed cell architecture also arrested the yield stress decrease and Poisson’s ratio increase at higher fiber angles thereby mitigating the transition into the matrix dominated mode. The addition of tertiary fibers also had a pronounced effect in arresting this transition into the matrix dominated mode. However, it was found that indiscriminate addition of tertiary fibers may not provide desired additional stiffness for fixed volume fraction of constituents. In conclusion, introducing a leaf-mimicking topology in fiber architecture can provide significant additional degrees of tunability in design of these composite structures.

Sign in / Sign up

Export Citation Format

Share Document