scholarly journals Impact Damage Resistance and Post-Impact Tolerance of Optimum Banana-Pseudo-Stem-Fiber-Reinforced Epoxy Sandwich Structures

2020 ◽  
Vol 10 (2) ◽  
pp. 684 ◽  
Author(s):  
Mohamad Zaki Hassan ◽  
S. M. Sapuan ◽  
Zainudin A. Rasid ◽  
Ariff Farhan Mohd Nor ◽  
Rozzeta Dolah ◽  
...  
Keyword(s):  
Composite Structures ◽  
Sandwich Structures ◽  
Impact Damage ◽  
Fiber Composite ◽  
Peak Load ◽  
Weight Ratio ◽  
Synthetic Fiber ◽  
Damage Area ◽  
Banana Fibers ◽  
The Impact

Banana fiber has a high potential for use in fiber composite structures due to its promise as a polymer reinforcement. However, it has poor bonding characteristics with the matrixes due to hydrophobic–hydrophilic incompatibility, inconsistency in blending weight ratio, and fiber length instability. In this study, the optimal conditions for a banana/epoxy composite as determined previously were used to fabricate a sandwich structure where carbon/Kevlar twill plies acted as the skins. The structure was evaluated based on two experimental tests: low-velocity impact and compression after impact (CAI) tests. Here, the synthetic fiber including Kevlar, carbon, and glass sandwich structures were also tested for comparison purposes. In general, the results showed a low peak load and larger damage area in the optimal banana/epoxy structures. The impact damage area, as characterized by the dye penetration, increased with increasing impact energy. The optimal banana composite and synthetic fiber systems were proven to offer a similar residual strength and normalized strength when higher impact energies were applied. Delamination and fracture behavior were dominant in the optimal banana structures subjected to CAI testing. Finally, optimization of the compounding parameters of the optimal banana fibers improved the impact and CAI properties of the structure, making them comparable to those of synthetic sandwich composites.

scholarly journals Modeling Analysis of Guided Ultrasonic Waves in Composite Plates with Impact Damage

2018 ◽  
Vol 7 (4.26) ◽  
pp. 175
Author(s):  
Noorfaten Asyikin Ibrahim ◽  
Bibi Intan Suraya Murat
Keyword(s):  
Composite Structures ◽  
Impact Damage ◽  
Composite Plates ◽  
Guided Wave ◽  
Ultrasonic Waves ◽  
Fe Model ◽  
Element Analysis ◽  
Damage Area ◽  
Guided Ultrasonic Waves ◽  
The Impact

This paper investigates the propagation of guided ultrasonic waves and the interaction with impact damage in composite plates using a full three-dimensional Finite Element analysis. Impact damage in the composite plate was modeled as rectangular- and T-shaped delaminations. In order to provide guidelines for extending the modeling of realistic multimode impact damage, the impact damage was modeled as a combination of the delamination and reduced materials properties. The information obtained from these methods was compared to the experimental results around the damage area for a validation. There was a reasonable similarity between the experimental and FE results. The FE simulations can effectively model the scattering characteristics of the A0 mode wave propagation in anisotropic composite plates. This suggests that the simplified and easy-to-implement FE model could be used to represent the complex impact damage in composite plates. This could be useful for the improvement of the FE modeling and performance of guided wave methods for the in-situ NDE of large composite structures. 

Investigation of the Mechanical Behavior of Natural Vegetable Fibers Used in Composite Materials for Structural Strengthening

2021 ◽  
Vol 888 ◽  
pp. 15-21
Author(s):  
Ivelina Ivanova ◽  
Jules Assih ◽  
Dimitar Dontchev
Keyword(s):  
Mechanical Properties ◽  
Composite Materials ◽  
Fiber Composite ◽  
Low Cost ◽  
Weight Ratio ◽  
Synthetic Fiber ◽  
Engineering Structures ◽  
Hemp Fiber ◽  
Plant Fibers ◽  
Hemp Fibers

This research aims at studying the mechanical properties of industrial hemp fibers and promoting their use as a reinforcing composite material for strengthening of civil engineering structures. Natural hemp fibers are of great interest due to the following advantages they have: low cost, high strength-to-weight ratio, low density and non-corrosive properties. The use of plant fiber composite materials has increased significantly in recent years because of the negative reduction impact on the environment. For example, the tendency to use renewable resources and their possibility for recycling. They cause fewer health and environmental problems than synthetic fibers. Natural fibers, in addition to environmental aspects, have advantages such as low densities, i.e. have low weight, interesting mechanical properties comparable to those of synthetic fiber materials, and last but not least, low cost. Composites based on natural plant fibers can be used to reinforce or repair reinforced concrete structures, as shown by research on flax fiber composites. These concretes specimens strengthened with biocomposite materials have very good resistance to bending and significantly increase the rigidity of the structure. The results show that the hemp fiber reinforcement has significant effects on the strengthening and increase in flexural strength from 8% to 35 %.

An Enhanced Time-Reversal Method for Impact Damage Monitoring on Plate-Like Structures

2012 ◽  
Vol 525-526 ◽  
pp. 365-368
Author(s):  
Chun Lin Chen ◽  
Yu Long Li ◽  
Fuh Gwo Yuan
Keyword(s):  
Time Reversal ◽  
Composite Structures ◽  
Impact Damage ◽  
High Energy ◽  
Low Velocity ◽  
Energy Impact ◽  
Location Detection ◽  
Focusing Property ◽  
The Impact ◽  
Impact Events

Based on the self-focusing property of time-reversal (T-R) concept, a time focusing parameter was suggested to improve the impact source identification method developed in authors previous work. This paper presents a further study on monitoring relatively high energy impact events which caused induced damage on structures. Numerical verifications for a finite isotropic plate and a composite plate under low velocity impacts are performed to demonstrate the versatility of T-R method for impact location detection with induced plastic deformation and delamination damage on metallic and composite structures respectively. The focusing property of T-R concept was adequately utilized to detect impact/damage location. The results show that impact events with various features can be localized using T-R method by introducing the time focusing parameter. It is suited to monitor serious impact events on plate like structures in practice in future.

scholarly journals Characterisation of Impact Damage of Composite Structures Using Wavelet-Based Fusion of Ultrasonic and Optical Images

2014 ◽  
Vol 23 (5) ◽  
pp. 096369351402300
Author(s):  
Andrzej Katunin ◽  
Pawel Kostka
Keyword(s):  
Composite Structures ◽  
Damage Identification ◽  
Impact Damage ◽  
Human Perception ◽  
Laminated Plates ◽  
Low Velocity ◽  
Fusion Algorithm ◽  
Fibre Failure ◽  
Optical Images ◽  
The Impact

This paper presents the novel approach for the impact damage characterisation of composite structures, which is based on fusion of ultrasonic scans and optical images. Both internal (inter-fibre failure, fibre failure, delaminations) and external (scratches and surface cracks) damages occurred in the composite structures during their operation need to be analysed due to their occurrence on both of these levels, especially in the case of impact damages. The presented approach allows for the improvement of the characterisation quality, i.e. the whole damaged area could be detected and localized. In order to assure the proper damage identification the wavelet-based fusion with application of appropriate wavelets and parameters of a fusion algorithm was used, which allows for distinction of different types of damages and overall improvement of the resulted image with respect to the human perception capability. The approach was validated experimentally on the glass-epoxy laminated plates after the low-velocity impacts. Representative cases of damaged structure were presented and analysed.

scholarly journals The Study of a Control Signal’s Phase Shift Influence on the Efficiency of a System for Active Vibration Damping Based on MFC Piezoelectric Transducers

2020 ◽  
Vol 318 ◽  
pp. 01005
Author(s):  
Marek Płaczek
Keyword(s):  
Phase Shift ◽  
Smart Materials ◽  
Composite Structures ◽  
Fiber Composite ◽  
Vibration Damping ◽  
Piezoelectric Transducers ◽  
Piezoelectric Composite ◽  
Active Vibration Damping ◽  
Active Vibration ◽  
The Impact

Active vibration damping of mechanical systems based on applications of smart materials has a large application potential and is getting more and more popular. In active vibration systems the fast response of actuators to the signals generated by sensors is one of the most important element that decides of the system’s efficiency because the idea is to generate force by active elements that will suppress the vibrations detected by the sensors. In this paper results of laboratory tests of a control signal’s phase shift influence on the efficiency of a system for active vibration damping based on application of Macro Fiber Composite (MFC) piezoelectric transducers are presented. MFCs are modern piezoelectric composite transducers produced as a thin, elastic films and can be easily installed on the surface of the mechanical subsystem or laminated in composite structures. The impact of the phase shifting between signals generated to power the actuator on the damping efficiency was verified and analysed. It was verified in what phase angle the damping of vibration has the best efficiency and if the shift of the signals causes the linear loss of the system efficiency. It was also verified whether it causes the same effects in both directions of shifting (advance or delay in the phase of the signal supplying the damper relative to the signal generated by the beam’s vibration).

scholarly journals Low-speed impact damage analysis of aviation composite material structure

2021 ◽  
Vol 260 ◽  
pp. 03021
Author(s):  
Jun He ◽  
Meng Cao ◽  
Zhishu Wang ◽  
Fanglin Cong
Keyword(s):  
Numerical Simulation ◽  
Finite Element ◽  
Composite Material ◽  
Composite Structures ◽  
Impact Damage ◽  
Low Velocity Impact ◽  
Material Structure ◽  
Damage Analysis ◽  
Low Speed ◽  
The Impact

Although the carbon fiber reinforced composite material has high specific strength and stiffness, design-versatility, anti-corrosion and other excellent features, but the impact resistance of composite structures is poor. Therefore, the composite laminates low-speed damage analysis has important significance. Based on a three-dimensional analysis theory of cumulative damage, using the commercial finite element analysis software ABAQUS to establish laminates subjected to low velocity impact finite element model. according to the numerical results and the consistency of the test results, shows that the used model of the article is reasonable and accurate, and the numerical simulation method is verified to be feasible. Finally, through the numerical simulation of process of laminated plates low speed impact damage, the damage characteristics and damage mechanism of the laminates at different times are analyzed, and the forming reasons and expanding rules of the main damage forms of fiber damage and matrix damage are revealed.

Real-time monitoring of low-velocity impact damage for composite structures with the omnidirection carbon nanotubes’ buckypaper sensors

2018 ◽  
Vol 18 (2) ◽  
pp. 454-465 ◽  
Author(s):  
Shaowei Lu ◽  
Kai Du ◽  
Xiaoqiang Wang ◽  
Caijiao Tian ◽  
Duo Chen ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Composite Structures ◽  
Impact Damage ◽  
Low Velocity Impact ◽  
Sensor Technology ◽  
Gauge Factor ◽  
Low Velocity ◽  
Repeated Impact ◽  
Velocity Impact ◽  
The Impact

A novel, omnidirectional, nanomaterial-based sensor technology which can provide wide area damage detection of composite structures was proposed in this work. The behaviors of the buckypaper sensors subjected to both tensile and low-velocity impact were investigated. The experimental results showed that the rectangle buckypaper sensor has a large range of sensing coefficients from 21.40 to 35.83 at different directions under tensile. However, the circular buckypaper sensor has a steady sensing coefficient of about 155.63. Thus, the circular buckypaper sensor as a kind of omnidirectional sensor was chosen to monitor the impact damage. The low-velocity impact damage of composite structures is characterized by the gauge factor of omnidirectional buckypaper sensors and the results of C-scanning. Omnidirectional buckypaper sensors’ electrical resistance increases with repeated impact loading; composite structure elastic deformation and damage evolution can be identified from resistance change. Experiment results show that structure monitoring based on the omnidirectional buckypaper sensor not only can detect small barely visible impact damage flaws and the damage evaluation of composite structures subjected to impact but also can determine the location of low-velocity impact damage through the analysis of results. Through comparison with C-scan, the results have preliminarily demonstrated that the omnidirectional carbon nanotubes’ buckypaper sensor can serve as an efficient tool for sensing the evolution of impact damage as well as serve structural health monitoring of composite structures.

On Mechanical Properties of Composite Sandwich Structures With Embedded Piezoelectric Fiber Composite Sensors

2011 ◽  
Vol 134 (1) ◽  
Author(s):  
Hari P. Konka ◽  
M. A. Wahab ◽  
K. Lian
Keyword(s):  
Composite Structures ◽  
Sandwich Structure ◽  
Sandwich Structures ◽  
Fiber Composite ◽  
Composite Sandwich ◽  
Composite Sandwich Structures ◽  
Analysis Technique ◽  
Short Beam ◽  
Piezoelectric Fiber Composite ◽  
Piezoelectric Fiber

The smart sandwich structures have been widely used in the aerospace, automobile, marine, and civil engineering applications. A typical smart sandwich structure is usually comprised of two stiff face skins separated by a thick core with variety of embedded sensors to monitor the performance of the structures. In this study, the smart composite sandwich structure (CSS) samples are fabricated with glass microballoons syntactic foam core and resin infused glass-fiber face skins (with piezoelectric fiber composite sensors (PFCS) embedded inside the resin infused glass-fiber face skins). One of the main concerns associated with embedding sensors inside composite structures is the structural continuity, compatibility, and interface stress concentrations caused by the significant differences in material property between sensor and host structures. PFCS are highly flexible, easily embeddable, highly compatible with composite structures and their manufacturing processes, which makes them ideal for composite health monitoring applications. In this study, in-plane tensile, tension–tension fatigue, short beam shear, and flexural tests are performed to evaluate the effect on strengths/behavior of the CSS samples due to embedded PFCS. Then carefully planned experiments are conducted to investigate the ability of the embedded PFCS to monitor the stress/strain levels and detect damages in CSS using modal analysis technique. The tensile tests show that both the average ultimate strength and the modulus of elasticity of the tested laminate with or without embedded PFCS are within 7% of each other. The stress–life (S-N) curves obtained from fatigue tests indicates that the fatigue lives and strengths with and without the PFCS are close to each other as well. From short beam and flexural test results, it is observed that embedded PFCS leads to a reduction of 5.4% in the short beam strength and 3.6% in flexural strength. Embedded PFCS’s voltage output response under tension–tension fatigue loading conditions has been recorded simultaneously to study their ability to detect the changes in input loading conditions. A linear relationship has been observed between the changes in the output voltage response of the sensor and changes in the input stress amplitude. This means that by constantly monitoring the output response of the embedded PFCS, one could effectively monitor the magnitude of stress/strain acting on the structure. Experiments are also performed to explore the ability of the embedded PFCS to detect the damages in the structures using modal analysis technique. Results from these experiments show that the PFCS are effective in detecting the initiations of damages like delamination inside these composite sandwich structures through changes in natural frequency modes. Hence embedded PFCS could be an effective method to monitor the health of the composite sandwich structures’ in-service conditions.

Low-Speed Impact Damage in Filament-Wound CFRP Composite Pressure Vessels

1997 ◽  
Vol 119 (4) ◽  
pp. 435-443 ◽  
Author(s):  
S. A. Matemilola ◽  
W. J. Stronge
Keyword(s):  
Impact Damage ◽  
Fiber Composite ◽  
Pressure Vessels ◽  
Matrix Cracking ◽  
Burst Pressure ◽  
Carbon Fiber Composite ◽  
Vessel Wall Thickness ◽  
Filament Wound ◽  
The Impact ◽  
Composite Pressure Vessels

Quasi-static and impact tests were conducted on filament-wound carbon fiber composite pressure vessels to study factors that affect burst pressure. Observed damage included fiber microbuckling, matrix cracking, and delamination. Fiber microbuckling of the outer surface layer near the impact point was the main factor that reduced the burst pressure of the vessels. This type of damage was visually detectable on the surface. For similar levels of missile kinetic energy, the impact damage to filament-wound composite pressure vessels depends on size and shape of the colliding body in the contact area. Burst pressure for a damaged vessel decreases with the ratio of axial length of damaged fibers 1, to vessel wall thickness h, up to a ratio 1/h = 3; beyond this length of damaged section the burst pressure was independent of length of damage. Strain measurements near the region of loading showed that damage related to fiber microbuckling is sensitive to strain rate. At locations where impact damage was predominately due to fiber microbuckling, the failure strain was about six times the strain for microbuckling during quasi-static loading.

scholarly journals Impact Resistance of Plain and Twill Fabric in GFRP Measured by Active Thermography

2018 ◽  
Vol 27 (5) ◽  
pp. 096369351802700 ◽  
Author(s):  
G. Strugala ◽  
M. Landowski ◽  
M. Zaremba ◽  
J. Turowski ◽  
M. Szkodo
Keyword(s):  
Impact Energy ◽  
Impact Damage ◽  
Impact Resistance ◽  
Damage Area ◽  
Plain Weave ◽  
Active Thermography ◽  
Glass Fibre Reinforced Polymer ◽  
Glass Fibre Reinforced ◽  
The Impact ◽  
Twill Weave

This paper discusses the impact resistance of glass-fibre reinforced polymer (GFRP) composites depending on the type of reinforcement – plain or twill weave. The values of impact energy were: 3J, 10J and 15J. Specimens featuring twill weave transferred higher force during the impact as compared with plain weave specimens. It was observed that an increase of impact energy was accompanied by an increase of the disproportion in transferred forces, in favour of twill weave specimens. Impact damage (in both types of weave) occurring as a result of 3J impact was undetectable with active thermography method. The damage area measured by means of active thermography for impact energy values equal to 10J and 15J proved that the type of reinforcement significantly influences the impact resistance of a composite. This has been justified by smaller damage areas with high spot intensity of damage in plain weave specimens and highly dispersed damage with lower intensity in twill weave specimens.

Sign in / Sign up

Export Citation Format

Share Document