Dynamic characteristics of composite tilting pad journal bearing for turbine/generator applications

2018 ◽  
Vol 201 ◽  
pp. 747-759 ◽  
Author(s):  
Seung Yoon On ◽  
Yun Seong Kim ◽  
Jun Il You ◽  
Jun Woo Lim ◽  
Seong Su Kim
Keyword(s):  
Dynamic Characteristics ◽  
Journal Bearing ◽  
Turbine Generator ◽  
Tilting Pad ◽  
Tilting Pad Journal Bearing

The Steady-State and Dynamic Characteristics of the Tilting-Pad Journal Bearing in Laminar and Turbulent Flow Regimes

1967 ◽  
Vol 89 (3) ◽  
pp. 392-400 ◽  
Author(s):  
F. K. Orcutt
Keyword(s):  
Steady State ◽  
Turbulent Flow ◽  
Dynamic Characteristics ◽  
Journal Bearing ◽  
Calculated Data ◽  
Operating Parameters ◽  
Experimental Measurements ◽  
Tilting Pad ◽  
Laminar And Turbulent Flow ◽  
Tilting Pad Journal Bearing

Calculated steady-state and dynamic characteristics are given for the four-pad, tilting-pad journal bearing with preload coefficients of 0 and 0.5 and for mean Reynolds up to 12,000. The calculated characteristics are compared with experimental measurements over the same range of operating parameters. Correlation is good, leading to the conclusion that the calculated data are effective for design analysis of rotor-bearing systems using tilting-pad bearings.

Analysis of Eccentric Load Effect for Tiliting Pad Journal Bearing

2013 ◽  
Vol 364 ◽  
pp. 71-75
Author(s):  
Ming Hu Yin ◽  
Guo Ding Chen ◽  
Guo Yuan Zhang
Keyword(s):  
Dynamic Characteristics ◽  
Journal Bearing ◽  
Journal Bearings ◽  
Eccentric Load ◽  
Load Effect ◽  
Static And Dynamic Characteristics ◽  
Tilting Pad ◽  
Bearing Design ◽  
Tilting Pad Journal Bearing ◽  
Tilting Pad Journal Bearings

Most of the studies about tilting pad journal bearings are for load-on-pad or load-between-pad tilting pad journal bearings, and for the other loading forms, the performance are often estimated by the performance of the two limited conditions, that may reduce the reliablity of bearing design or lead to waste materials in design. To obtained the influence of the load directions on the static and dynamic characteristics of the tilting pad journal bearing, which is called eccentric load effect in this papers, the performance calculation of the tilting pad journal bearing in different load directions is operated with a self-designed program. The results show that the load directions have considerable effects both on the static and dynamic characteristics of the tilting pad journal bearing, for the operating condition that load direction changed rapidly, it need performance analysis of the bearing in its special loading forms to enhance the precision and efficiency of bearing design, espacially where the dynamic performance of the tilting pad journal bearing is demanding.

scholarly journals Measurements Versus Predictions for the Static and Dynamic Characteristics of a Four-Pad, Rocker-Pivot, Tilting-Pad Journal Bearing

2014 ◽  
Vol 136 (5) ◽  
Author(s):  
David P. Tschoepe ◽  
Dara W. Childs
Keyword(s):  
Dynamic Characteristics ◽  
Room Temperature ◽  
Journal Bearing ◽  
Dynamic Stiffness ◽  
Static And Dynamic Characteristics ◽  
Rotordynamic Coefficients ◽  
Stiffness Coefficients ◽  
Tilting Pad ◽  
Frequency Independent ◽  
Tilting Pad Journal Bearing

Measured and predicted static and dynamic characteristics are provided for a four-pad, rocker-pivot, tilting-pad journal bearing (TPJB) in the load-on-pad (LOP) and load-between-pad (LBP) orientations. The bearing has the following characteristics: pad-pivot offset = 0.57, L/D = 0.6, pad length = 60.33 mm. Unit loads ranged from 0 to 2903 kPa, and speeds ranged from 6.8 to 13.2 krpm. Nonrotating tests were carried out using a small rotating load to precess the test-bearing stator around the rotor shaft while measuring the clearances. These tests produced “clearance rectangles” for the LOP case and “clearance rhombuses” for the LBP cases. These tests defined the bearing clearances for facing bearing pads that were significantly different with a ratio between the larger and smaller clearances at approximately 1.6. Clearances were measured at room temperatures and immediately following tests to obtain room temperature and “hot” clearances. Hot-clearance measurements showed a 16%–25% decrease as compared to room-temperature clearances. Static load-deflection tests were carried out to determine the pad's flexibility characteristics with respect to the housing (pad-pivot flexibility). Detailed circumferential temperature measurements were made on the loaded pad(s) with only leading and trailing temperatures for the unloaded pads. The radial thermal gradient was examined in the loaded pad via embedded thermocouples on the rotor and outside of the pads. Results showed a 5–25 °C decrease from the rotor side of the pad to housing side. An FEM analysis predicted that the radial and circumferential temperature gradients caused an uneven thermal deflection in the pad, changing the pads' radii of curvature. (However, the changes made scant differences in predictions.) Dynamic-excitation tests were performed over a range of excitation frequencies Ω to obtain 2 × 2 complex dynamic-stiffness matrices [Hij] as a function of Ω. The Re(Hij) coefficients were readily fitted as a linear function of Ω2, producing frequency-independent stiffness and virtual-mass coefficients. The Im(Hij) coefficients were readily fitted as a linear function of Ω, producing frequency-independent damping coefficients and supporting the adequacy of a constant-frequency MCK model for bearings out to running speed. Measured (separate) pad clearances, pad-contact flexibility characteristics, and input temperatures were used as input for a recently-developed code to predict the static and dynamic characteristics of the bearing. The code used a Reynolds equation model plus an adiabatic energy equation. It also accounts for pad-contact flexibility. Measurements versus predictions were made for the temperature distributions, the dynamic-stiffness coefficients, and the direct rotordynamic coefficients (stiffness, damping, and virtual-mass). The measured cross-coupled stiffness and damping coefficients were insignificant, and are not presented. Generally, the code predicts the trends of the circumferential temperature distributions well; however, it predicted a continuing increase in temperature from leading to trailing edge, while the tests show an increase through the next-to-last temperature probe and then a drop to the last probe nearest the trailing edge. Generally speaking, the code does an adequate job of predicting rotordynamic coefficients for both LOP and LBP conditions. The input data (clearances, pad-flexibility, etc.) and output results (temperatures, dynamic stiffness coefficients, rotordynamic coefficients) presented allow other researchers to directly make predictions for these bearings using alternate models and codes.

Cooling Effect and Dynamic Characteristics of Oil Film of Partial Tilting Pad Bearing

2007 ◽  
Author(s):  
Kyung-Bo Bang ◽  
Jeong-Hun Kim ◽  
Cheol-Hong Kim
Keyword(s):  
Dynamic Characteristics ◽  
Journal Bearing ◽  
Hydrodynamic Pressure ◽  
Oil Film ◽  
Rotating Speed ◽  
Damping Coefficients ◽  
Tilting Pad ◽  
Oil Flow ◽  
Stiffness And Damping ◽  
Tilting Pad Journal Bearing

In the present paper, we suggest a new type of tilting pad journal bearing to decrease oil film temperature and eliminate pad fluttering during operation. This bearing consists of tilting pad journal bearing at low casing and fixed arc type journal bearing at upper casing. Namely we changed a tilting pad bearing with a fixed arc type bearing at upper casing. To investigate the effects of changing the bearing shape, the static and dynamic characteristics were compared experimentally with conventional tilting pad journal bearing. For the static characteristics, oil film temperature, hydrodynamic pressure and oil film thickness were measured with the variation of rotating speed, bearing load and oil flow rate. The stiffness and damping coefficients of oil film were also obtained using the response subjected to harmonic external force to evaluating the dynamic characteristics. The results show that the suggested type of bearing has effect on reducing oil film temperature and increasing stiffness and damping coefficients of oil film.

scholarly journals Improvement of Tilting-Pad Journal Bearing Operating Characteristics by Application of Eddy Grooves

Lubricants ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 18
Author(s):  
Eckhard Schüler ◽  
Olaf Berner
Keyword(s):  
High Speed ◽  
Journal Bearing ◽  
Load Capacity ◽  
Fluid Film ◽  
Operating Characteristics ◽  
Fluid Film Bearings ◽  
Tilting Pad ◽  
Bearing Load ◽  
Bearing Loads ◽  
Tilting Pad Journal Bearing

In high speed, high load fluid-film bearings, the laminar-turbulent flow transition can lead to a considerable reduction of the maximum bearing temperatures, due to a homogenization of the fluid-film temperature in radial direction. Since this phenomenon only occurs significantly in large bearings or at very high sliding speeds, means to achieve the effect at lower speeds have been investigated in the past. This paper shows an experimental investigation of this effect and how it can be used for smaller bearings by optimized eddy grooves, machined into the bearing surface. The investigations were carried out on a Miba journal bearing test rig with Ø120 mm shaft diameter at speeds between 50 m/s–110 m/s and at specific bearing loads up to 4.0 MPa. To investigate the potential of this technology, additional temperature probes were installed at the crucial position directly in the sliding surface of an up-to-date tilting pad journal bearing. The results show that the achieved surface temperature reduction with the optimized eddy grooves is significant and represents a considerable enhancement of bearing load capacity. This increase in performance opens new options for the design of bearings and related turbomachinery applications.

Sign in / Sign up

Export Citation Format

Share Document