scholarly journals Using redox active molecules to build multilayered architecture on carbon fibers and the effect on adhesion in epoxy composites

2021 ◽  
Vol 202 ◽  
pp. 108564
Author(s):  
Melissa K. Stanfield ◽  
Daniel J. Eyckens ◽  
Jérôme Médard ◽  
Philippe Decorse ◽  
Jean Pinson ◽  
...  
Keyword(s):  
Carbon Fibers ◽  
Epoxy Composites ◽  
Redox Active

Graphene oxide modified carbon fiber reinforced epoxy composites

2020 ◽  
Vol 40 (5) ◽  
pp. 415-420 ◽  
Author(s):  
Yasin Altin ◽  
Hazal Yilmaz ◽  
Omer Faruk Unsal ◽  
Ayse Celik Bedeloglu
Keyword(s):  
Graphene Oxide ◽  
Carbon Fiber ◽  
Carbon Fibers ◽  
Spray Coating ◽  
Sem Analysis ◽  
Epoxy Composites ◽  
Matrix Composites ◽  
Fiber Reinforced ◽  
Quick Method ◽  
Carbon Fiber Reinforced

AbstractThe interfacial interaction between the fiber and matrix is the most important factor which influences the performance of the carbon fiber-epoxy composites. In this study, the graphitic surface of the carbon fibers was modified with graphene oxide nanomaterials by using a spray coating technique which is an easy, cheap, and quick method. The carbon fiber-reinforced epoxy matrix composites were prepared by hand layup technique using neat carbon fibers and 0.5, 1 and 2% by weight graphene oxide (GO) modified carbon fibers. As a result of SEM analysis, it was observed that GO particles were homogeneously coated on the surface of the carbon fibers. Furthermore, Young's modulus increased from 35.14 to 43.40 GPa, tensile strength increased from 436 to 672 MPa, and the elongation at break was maintained around 2% even in only 2% GO addition.

Surface and Composite Interface of Carbon Fiber Modified by Grafting of Diethanolamine

2009 ◽  
Vol 79-82 ◽  
pp. 497-500 ◽  
Author(s):  
Lei Chen ◽  
Zhi Wei Xu ◽  
Jia Lu Li ◽  
Xiao Qing Wu ◽  
Li Chen
Keyword(s):  
Shear Strength ◽  
Carbon Fiber ◽  
Functional Groups ◽  
Carbon Fibers ◽  
Irradiation Dose ◽  
Interlaminar Shear Strength ◽  
Epoxy Composites ◽  
Composite Interface ◽  
Γ Ray ◽  
Interlaminar Shear

The γ-ray co-irradiation method was employed to study the effect of diethanolamine modification on the surface of carbon fiber (CF) and the interfacial properties of CF/epoxy composites. Compared with the original carbon fiber, the surface of modified fibers became rougher. The amount of oxygen-containing functional groups was increased and the nitrogen element was detected after irradiation grafting. The interlaminar shear strength (ILSS) of composites reinforced by carbon fibers irradiated in diethanolamine solution was increased and then decreased as the irradiation dose increased. The ILSS of CF/epoxy composites was enhanced by 16.1% at 200kGy dose, compared with that of untreated one. The γ-ray irradiation grafting is expected to be a promising method for the industrialized modification of carbon fibers.

scholarly journals Thermo-mechanical behavior of epoxy composite reinforced by carbon and Kevlar fiber

2018 ◽  
Vol 225 ◽  
pp. 01022
Author(s):  
Falak O. Abasi ◽  
Raghad U. Aabass
Keyword(s):  
Mechanical Properties ◽  
Carbon Fiber ◽  
Flexural Strength ◽  
Carbon Fibers ◽  
Epoxy Composites ◽  
Fiber Reinforced ◽  
Fiber Loading ◽  
Kevlar Fiber ◽  
Carbon Fiber Reinforced ◽  
Short Carbon

Newer manufacturing techniques were invented and introduced during the last few decades; some of them were increasingly popular due to their enhanced advantages and ease of manufacturing over the conventional processes. Polymer composite material such as glass, carbon and Kevlar fiber reinforced composite are popular in high performance and light weight applications such as aerospace and automobile fields. This research has been done by reinforcing the matrix (epoxy) resin with two kinds of the reinforcement fibers. One weight fractions were used (20%) wt., Epoxy reinforced with chopped carbon fiber and second reinforcement was epoxy reinforced with hybrid reinforcements Kevlar fiber and improved one was the three laminates Kevlar fiber and chopped carbon fibers reinforced epoxy resin. After preparation of composite materials some of the mechanical properties have been studied. Four different fiber loading, i.e., 0 wt. %, 20wt. % CCF, 20wt. % SKF, AND 20wt. %CCF + 20wt. % SKF were taken for evaluating the above said properties. The thermal and mechanical properties, i.e., hardness load, impact strength, flexural strength (bending load), and thermal conductivity are determined to represent the behaviour of composite structures with that of fibers loading. The results show that with the increase in fiber loading the mechanical properties of carbon fiber reinforced epoxy composites increases as compared to short carbon fiber reinforced epoxy composites except in case of hardness, short carbon fiber reinforced composites shows better results. Similarly, flexural strength test, Impact test, and Brinell hardness test the results show the flexural strength, impact strength of the hybrid composites values were increased with existence of Kevlar fibers, while the hardness was decrease. But the reinforcement with carbon fibers increases the hardness and decreases other tests.

MoS2 Nanosheet-Coated Carbon Fibers as Strain Sensors in Epoxy Composites

2021 ◽  
Vol 4 (9) ◽  
pp. 9181-9189
Author(s):  
Jingwen Chu ◽  
Mark A. Bissett ◽  
Robert J. Young
Keyword(s):  
Carbon Fibers ◽  
Strain Sensors ◽  
Epoxy Composites ◽  
Mos2 Nanosheet ◽  
Coated Carbon

Improving the Curing and Mechanical Properties of Short Carbon Fibers/Epoxy Composites by Grafting Nano ZIF‐8 on Fibers

2019 ◽  
Vol 7 (2) ◽  
pp. 1901490 ◽  
Author(s):  
Yixing Zhan ◽  
Yating Wang ◽  
Ming Wang ◽  
Xiaoqing Ding ◽  
Xinlong Wang
Keyword(s):  
Mechanical Properties ◽  
Carbon Fibers ◽  
Epoxy Composites ◽  
Short Carbon
Sign in / Sign up

Export Citation Format

Share Document