Development of boundary conditions for direct numerical simulations of three-dimensional vortex breakdown phenomena in semi-infinite domains

2004 ◽  
Vol 33 (9) ◽  
pp. 1225-1250 ◽  
Author(s):  
M.R. Ruith ◽  
P. Chen ◽  
E. Meiburg
Keyword(s):  
Boundary Conditions ◽  
Numerical Simulations ◽  
Vortex Breakdown ◽  
Three Dimensional ◽  
Direct Numerical Simulations ◽  
Infinite Domains

scholarly journals Direct numerical simulations of forced and unforced separation bubbles on an airfoil at incidence

2008 ◽  
Vol 602 ◽  
pp. 175-207 ◽  
Author(s):  
L. E. JONES ◽  
R. D. SANDBERG ◽  
N. D. SANDHAM
Keyword(s):  
Numerical Simulations ◽  
Reverse Flow ◽  
Three Dimensional ◽  
Transition Process ◽  
Direct Numerical Simulations ◽  
Transition To Turbulence ◽  
Absolute Instability ◽  
Laminar Separation ◽  
Velocity Magnitude ◽  
Separation Bubbles

Direct numerical simulations (DNS) of laminar separation bubbles on a NACA-0012 airfoil at Rec=5×104 and incidence 5° are presented. Initially volume forcing is introduced in order to promote transition to turbulence. After obtaining sufficient data from this forced case, the explicitly added disturbances are removed and the simulation run further. With no forcing the turbulence is observed to self-sustain, with increased turbulence intensity in the reattachment region. A comparison of the forced and unforced cases shows that the forcing improves the aerodynamic performance whilst requiring little energy input. Classical linear stability analysis is performed upon the time-averaged flow field; however no absolute instability is observed that could explain the presence of self-sustaining turbulence. Finally, a series of simplified DNS are presented that illustrate a three-dimensional absolute instability of the two-dimensional vortex shedding that occurs naturally. Three-dimensional perturbations are amplified in the braid region of developing vortices, and subsequently convected upstream by local regions of reverse flow, within which the upstream velocity magnitude greatly exceeds that of the time-average. The perturbations are convected into the braid region of the next developing vortex, where they are amplified further, hence the cycle repeats with increasing amplitude. The fact that this transition process is independent of upstream disturbances has implications for modelling separation bubbles.

scholarly journals A weakly nonlinear mechanism for mode selection in swirling jets

2012 ◽  
Vol 699 ◽  
pp. 216-262 ◽  
Author(s):  
Philippe Meliga ◽  
François Gallaire ◽  
Jean-Marc Chomaz
Keyword(s):  
Normal Form ◽  
Numerical Simulations ◽  
Vortex Breakdown ◽  
Double Helix ◽  
Mode Selection ◽  
Direct Numerical Simulations ◽  
Swirling Jets ◽  
Graphic Mode ◽  
Stable Solutions ◽  
Single Helix

AbstractGlobal linear and nonlinear bifurcation analysis is used to revisit the spiral vortex breakdown of nominally axisymmetric swirling jets. For the parameters considered herein, stability analyses single out two unstable linear modes of azimuthal wavenumber $m= \ensuremath{-} 1$ and $m= \ensuremath{-} 2$, bifurcating from the axisymmetric breakdown solution. These modes are interpreted in terms of spiral perturbations wrapped around and behind the axisymmetric bubble, rotating in time in the same direction as the swirling flow but winding in space in the opposite direction. Issues are addressed regarding the role of these modes with respect to the existence, mode selection and internal structure of vortex breakdown, as assessed from the three-dimensional direct numerical simulations of Ruith et al. (J. Fluid Mech., vol. 486, 2003, pp. 331–378). The normal form describing the leading-order nonlinear interaction between modes is computed and analysed. It admits two stable solutions corresponding to pure single and double helices. At large swirl, the axisymmetric solution bifurcates to the double helix which remains the only stable solution. At low and moderate swirl, it bifurcates first to the single helix, and subsequently to the double helix through a series of subcritical bifurcations yielding hysteresis over a finite range of Reynolds numbers, the estimated bifurcation threshold being in good agreement with that observed in the direct numerical simulations. Evidence is provided that this selection is not to be ascribed to classical mean flow corrections induced by the existence of the unstable modes, but to a non-trivial competition between harmonics. Because the frequencies of the leading modes approach a strong $2$:$1$ resonance, an alternative normal form allowing interactions between the $m= \ensuremath{-} 2$ mode and the first harmonics of the $m= \ensuremath{-} 1$ mode is computed and analysed. It admits two stable solutions, the double helix already identified in the non-resonant case, and a single helix differing from that observed in the non-resonant case only by the presence of a slaved, phase-locked harmonic deformation. On behalf of the finite departure from the $2$:$1$ resonance, the amplitude of the slaved harmonic is however low, and the effect of the resonance on the bifurcation structure is merely limited to a reduction of the hysteresis range.

Direct Numerical Simulations of Transitional Separation–Bubble Development in Swept–Blade Flow Conditions

2012 ◽  
Author(s):  
Joshua R. Brinkerhoff ◽  
Metin I. Yaras
Keyword(s):  
Boundary Layer ◽  
Numerical Simulations ◽  
Shear Layer ◽  
Pressure Field ◽  
Separation Bubble ◽  
Three Dimensional ◽  
Direct Numerical Simulations ◽  
Small Scale ◽  
Flow Conditions ◽  
Crossflow Instability

This paper describes numerical simulations of the instability mechanisms in a separation bubble subjected to a three-dimensional freestream pressure distribution. Two direct numerical simulations are performed of a separation bubble with laminar separation and turbulent reattachment under low freestream turbulence at flow Reynolds numbers and streamwise pressure distributions that approximate the conditions encountered on the suction side of typical low-pressure gas-turbine blades with blade sweep angles of 0° and 45°. The three-dimensional pressure field in the swept configuration produces a crossflow-velocity component in the laminar boundary layer upstream of the separation point that is unstable to a crossflow instability mode. The simulation results show that crossflow instability does not play a role in the development of the boundary layer upstream of separation. An increase in the amplification rate and most amplified disturbance frequency is observed in the separated-flow region of the swept configuration, and is attributed to boundary-layer conditions at the point of separation that are modified by the spanwise pressure gradient. This results in a slight upstream movement of the location where the shear layer breaks down to small-scale turbulence and modifies the turbulent mixing of the separated shear layer to yield a downstream shift in the time-averaged reattachment location. The results demonstrate that although crossflow instability does not appear to have a noticeable effect on the development of the transitional separation bubble, the 3D pressure field does indirectly alter the separation-bubble development by modifying the flow conditions at separation.

scholarly journals Comparison of Flame Propagation Statistics Extracted from Direct Numerical Simulation Based on Simple and Detailed Chemistry—Part 1: Fundamental Flame Turbulence Interaction

Energies ◽  
2021 ◽  
Vol 14 (17) ◽  
pp. 5548
Author(s):  
Felix Benjamin Keil ◽  
Marvin Amzehnhoff ◽  
Umair Ahmed ◽  
Nilanjan Chakraborty ◽  
Markus Klein
Keyword(s):  
Numerical Simulations ◽  
Flame Propagation ◽  
High Performance ◽  
Three Dimensional ◽  
Quantitative Agreement ◽  
Combustion Regime ◽  
Computing Methods ◽  
Direct Numerical Simulations ◽  
Tangential Strain ◽  
Detailed Chemistry

In the present study, flame propagation statistics from turbulent statistically planar premixed flames obtained from simple and detailed chemistry, three-dimensional Direct Numerical Simulations, were evaluated and compared to each other. To this end, a new database was established encompassing five different conditions on the turbulent premixed combustion regime diagram, using nearly identical numerical methods and the same initial and boundary conditions. A detailed discussion of the advantages and limitations of both approaches is provided, including the difference in carbon footprint for establishing the database. It is shown that displacement speed statistics and their interrelation with curvature and tangential strain rate are in very good qualitative and reasonably good quantitative agreement between simple and detailed chemistry Direct Numerical Simulations. Hence, it is concluded that simple chemistry simulations should retain their importance for future combustion research, and the environmental impact of high-performance computing methods should be carefully chosen in relation to the goals to be achieved.

Sign in / Sign up

Export Citation Format

Share Document