scholarly journals Effect of nano-silica particles on the hydration, the rheology and the strength development of a blended cement paste

2019 ◽  
Vol 95 ◽  
pp. 42-55 ◽  
Author(s):  
F. Lavergne ◽  
R. Belhadi ◽  
J. Carriat ◽  
A. Ben Fraj
Crystals ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 1394
Author(s):  
Renuka Senthil Muthalvan ◽  
Suraj Ravikumar ◽  
Siva Avudaiappan ◽  
Mugahed Amran ◽  
Radhamanohar Aepuru ◽  
...  

Incorporating superabsorbent polymer (SAP), which has the abilities of absorption and desorption in cement mortar, can achieve the effect of internal curing. It is expected that the incorporation of nano-silica will improve the workability and strength in cement mortar/concrete. Hence, this study aims to examine the effect of SAP and nano-silica on the properties of blended cement paste. The experimental investigations via several tests such as consistency, setting time, compressive strength, UPV, and acid test were performed. Based on energy-dispersive X-ray analysis (EDX) test and scanning electron microscopy (SEM) test results, the morphology of hydration products and mineral compositions of cement paste were further analysed, and the mechanism of SAP with 0.2% and 0.3% and NS with lower percentages ranging from 0.5% to 2% on the performance of cement paste was studied. The results exhibited that incorporating SAP in various percentages from 0.5% to 2% prolonged the initial setting time, reduced the fluidity, and increased the water content and formation of pores. In addition, various percentages ranging from 0.5% to 2% of NS were added; thereby, an increase in the hydration process and refining the microstructure was found. The microscopic test results showed that the blended cement paste can effectively improve the denser microstructure and refine the pore structure.


2020 ◽  
Author(s):  
Moruf O. Yusuf ◽  
Sami I. Shamsah ◽  
Khaled A. Al‐Sodani ◽  
Salihu Lukman

2022 ◽  
Vol 152 ◽  
pp. 106657
Author(s):  
M. Frías ◽  
S. Martínez-Ramírez ◽  
R. Vigil de la Villa ◽  
R. García-Giménez ◽  
M.I. Sánchez de Rojas

2019 ◽  
Vol 967 ◽  
pp. 205-213
Author(s):  
Faiz U.A. Shaikh ◽  
Anwar Hosan

This paper presents the effect of nanosilica (NS) on compressive strength and microstructure of cement paste containing high volume slag and high volume slag-fly ash blend as partial replacement of ordinary Portland cement (OPC). Results show that high volume slag (HVS) cement paste containing 60% slag exhibited about 4% higher compressive strength than control cement paste, while the HVS cement paste containing 70% slag maintained the similar compressive strength to control cement paste. However, about 9% and 37% reduction in compressive strength in HVS cement pastes is observed due to use of 80% and 90% slag, respectively. The high volume slag-fly ash (HVSFA) cement pastes containing total slag and fly ash content of 60% exhibited about 5%-16% higher compressive strength than control cement paste. However, significant reduction in compressive strength is observed in higher slag-fly ash blends with increasing in fly ash contents. Results also show that the addition of 1-4% NS improves the compressive strength of HVS cement paste containing 70% slag by about 9-24%. However, at higher slag contents of 80% and 90% this improvement is even higher e.g. 11-29% and 17-41%, respectively. The NS addition also improves the compressive strength by about 1-59% and 5-21% in high volume slag-fly ash cement pastes containing 21% fly ash+49%slag and 24% fly ash+56%slag, respectively. The thermogravimetric analysis (TGA) results confirm the reduction of calcium hydroxide (CH) in HVS/HVSFA pastes containing NS indicating the formation of additional calcium silicate hydrate (CSH) gels in the system. By combining slag, fly ash and NS in high volumes e.g. 70-80%, the carbon footprint of cement paste is reduced by 66-76% while maintains the similar compressive strength of control cement paste. Keywords: high volume slag, nanosilica, compressive strength, TGA, high volume slag-fly ash blend, CO2 emission.


Proceedings ◽  
2019 ◽  
Vol 34 (1) ◽  
pp. 9
Author(s):  
Joseph ◽  
Al-Bahar ◽  
Chakkamalayath ◽  
Al-Arbeed ◽  
Rasheed

One of the major concerns of concrete industries is to develop materials that consume less natural virgin resources and energy to make sustainable construction practices. Efforts have been made and even implemented to use the waste/by product materials such as fly ash, slag, silica fume, and natural pozzolana as a partial or complete replacement for Portland cement in concrete mixtures. The deterioration of concrete structures in the existing hot and cold climates of Gulf Cooperation Council countries, along with chloride and sulphate attack, demands the use of pozzolanic materials for concrete construction. Volcanic ash incorporated cement based concretes are known for its better performance in terms of strength and durability in harsh marine environments. Understanding the cement hydration process and characterizing the hydration products in microstructural level is a complex and interdependent process that allows one to design complex mix proportions to produce sustainable concrete materials. In this paper, the early and late age hydration behavior along with micro- and pore structure of cement paste samples prepared with locally available ordinary Portland cement (OPC) and volcanic ash (VA) obtained from Saudi Arabia was monitored using X-ray diffraction (XRD), scanning electron microscopy (SEM), thermogravimetric (TGA) and N2-Adsorption analysis. The hydration progress of cement paste samples with different combinations of OPC and VA (0%, 15%, 25%, and 35%) at a w/c ratio of 0.45 after 14, 28, and 90 days were discussed. The qualitative XRD and SEM of cement paste samples showed no new phases were formed during the course of hydration. The disappearance of portlandite with increase in VA content was due to both pozzolanic effect and dilution effect. This was further confirmed quantitatively by the TGA observations that the samples with VA contain less Ca(OH)2 compared to the control specimens. N2 adsorption experiments after 90 days of curing showed larger hysteresis as the VA content increases. The studies show that the incorporation of volcanic ash certainly contributes to the generation of C-S-H and hence the cement hydration progress, especially in the later ages through pozzolanic reactions. A 15–25 % volcanic ash blended cement paste samples showed compact and denser morphological features, which will be highly detrimental for the durability performances.


Sign in / Sign up

Export Citation Format

Share Document