Fluidization of sawdust in a cold model circulating fluidized bed: Experimental study

2011 ◽  
Vol 167 (1) ◽  
pp. 335-341 ◽  
Author(s):  
Qi Miao ◽  
Chu Wang ◽  
Chuangzhi Wu ◽  
Xiuli Yin ◽  
Jesse Zhu
Keyword(s):  
Experimental Study ◽  
Fluidized Bed ◽  
Circulating Fluidized Bed ◽  
Cold Model

Gas mixing in a multi-stage conversion fluidized bed (MFB) with secondary air injection. Part I: an experimental study

RSC Advances ◽  
2016 ◽  
Vol 6 (43) ◽  
pp. 36642-36655 ◽  
Author(s):  
Rong Zhang ◽  
Zhenhua Hao ◽  
Zhiyu Wang ◽  
Xiaodong Huo ◽  
Junguo Li ◽  
...  
Keyword(s):  
Experimental Study ◽  
Fluidized Bed ◽  
Air Injection ◽  
Gas Mixing ◽  
Cold Model ◽  
Stage Conversion ◽  
Multi Stage ◽  
Secondary Air Injection ◽  
Secondary Air

This paper investigated the distribution of secondary air after injection into a multi-stage conversion fluidized bed (MFB) cold model.

Solids Flow Pattern in the Bottom Zone of a Rectangular Cross-Section Circulating Fluidized Bed

2003 ◽  
Author(s):  
Hong-Shun Li ◽  
Yi-Jun Wang ◽  
Shi-Ping Jin
Keyword(s):  
Flow Pattern ◽  
Fluidized Bed ◽  
Cross Section ◽  
Quartz Sand ◽  
Circulating Fluidized Bed ◽  
Rectangular Cross Section ◽  
Temperature Response ◽  
Cold Model ◽  
Hot Particles ◽  
Bottom Zone

Solids flow pattern in the bottom zone of a rectangular cross-section CFB was investigated by using hot particles as the tracer. The experiments were carried out in a cold model circulating fluidized bed. The riser has an inner cross-section of 0.3 m by 0.5 m and a height of 5.8 m. The solids were returned into the riser at a height of 0.75 m above the air distributor within an angle of about 40 degree. Quartz sand was used as the bed material. The hot particles were also quartz sand but with a little smaller size. Specially designed miniature electrically heating devices were installed flush with the inner bed wall or inside the bed. At each run, about 10–15 cm3 hot particles were slowly pulled into the bed. The temperature response around the device was measured with four copper-constantan thermocouples. Based on the experimental results, a 3-D core-annulus model describing the solids flow pattern in the bottom zone of the CFB riser is proposed.

Experimental Study of Solids Motion in an 18 m Gas–Solids Circulating Fluidized Bed with High Solids Flux

2019 ◽  
Vol 58 (51) ◽  
pp. 23468-23480 ◽  
Author(s):  
Xin Su ◽  
Chengxiu Wang ◽  
Huajian Pei ◽  
Jingya Li ◽  
Xingying Lan ◽  
...  
Keyword(s):  
Experimental Study ◽  
Fluidized Bed ◽  
Circulating Fluidized Bed ◽  
High Solids

Experimental study on rice husk combustion in a circulating fluidized bed

2004 ◽  
Vol 85 (11) ◽  
pp. 1273-1282 ◽  
Author(s):  
M. Fang ◽  
L. Yang ◽  
G. Chen ◽  
Z. Shi ◽  
Z. Luo ◽  
...  
Keyword(s):  
Experimental Study ◽  
Fluidized Bed ◽  
Rice Husk ◽  
Circulating Fluidized Bed

THEORETICAL AND EXPERIMENTAL STUDY OF PARTICULATE SOLIDS DRYING IN CIRCULATING FLUIDIZED BED

2019 ◽  
Vol 18 (2) ◽  
pp. 267-276
Author(s):  
Andrey Mitrofanov ◽  
Vadim Mizonov ◽  
Elena Shuina ◽  
Natalia Kasatkina ◽  
Natalia Shpeynova
Keyword(s):  
Experimental Study ◽  
Fluidized Bed ◽  
Circulating Fluidized Bed ◽  
Particulate Solids
Sign in / Sign up

Export Citation Format

Share Document