Effects of interface between SnO2 thin film and Si substrate on growth time

2012 ◽  
Vol 12 (1) ◽  
pp. 303-306 ◽  
Author(s):  
Jin Jeong ◽  
Do-Sun Na ◽  
Bong-Ju Lee ◽  
Ho-Jun Song ◽  
Hyun-Goo Kim
Keyword(s):  
Thin Film ◽  
Sno2 Thin Film ◽  
Growth Time ◽  
Si Substrate

scholarly journals Influence of Active Channel Layer Thickness on SnO2 Thin-Film Transistor Performance

Electronics ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 200
Author(s):  
Do Won Kim ◽  
Hyeon Joong Kim ◽  
Changmin Lee ◽  
Kyoungdu Kim ◽  
Jin-Hyuk Bae ◽  
...  
Keyword(s):  
Thin Film ◽  
Field Effect ◽  
Thin Film Transistor ◽  
Sol Gel ◽  
Precursor Concentration ◽  
Sno2 Thin Film ◽  
Field Effect Mobility ◽  
Si Substrates ◽  
Channel Layer ◽  
Active Channel

Sol-gel processed SnO2 thin-film transistors (TFTs) were fabricated on SiO2/p+ Si substrates. The SnO2 active channel layer was deposited by the sol-gel spin coating method. Precursor concentration influenced the film thickness and surface roughness. As the concentration of the precursor was increased, the deposited films were thicker and smoother. The device performance was influenced by the thickness and roughness of the SnO2 active channel layer. Decreased precursor concentration resulted in a fabricated device with lower field-effect mobility, larger subthreshold swing (SS), and increased threshold voltage (Vth), originating from the lower free carrier concentration and increase in trap sites. The fabricated SnO2 TFTs, with an optimized 0.030 M precursor, had a field-effect mobility of 9.38 cm2/Vs, an SS of 1.99, an Ion/Ioff value of ~4.0 × 107, and showed enhancement mode operation and positive Vth, equal to 9.83 V.

Enhanced methylene blue removal efficiency of SnO2 thin film using sono-photocatalytic processes

2021 ◽  
Vol 117 ◽  
pp. 111116
Author(s):  
Mohamed Amine Bezzerrouk ◽  
Mohamed Bousmaha ◽  
Madani Hassan ◽  
Ahmed Akriche ◽  
Bachir Kharroubi ◽  
...  
Keyword(s):  
Thin Film ◽  
Methylene Blue ◽  
Removal Efficiency ◽  
Sno2 Thin Film ◽  
Methylene Blue Removal ◽  
Photocatalytic Processes

scholarly journals Improved Negative Bias Stress Stability of Sol–Gel-Processed Li-Doped SnO2 Thin-Film Transistors

Electronics ◽  
2021 ◽  
Vol 10 (14) ◽  
pp. 1629
Author(s):  
Hyeon-Joong Kim ◽  
Do-Won Kim ◽  
Won-Yong Lee ◽  
Sin-Hyung Lee ◽  
Jin-Hyuk Bae ◽  
...  
Keyword(s):  
Thin Film ◽  
Oxygen Vacancy ◽  
Thin Film Transistors ◽  
Sol Gel ◽  
Sno2 Thin Film ◽  
Negative Bias ◽  
Semiconductor Films ◽  
Saturation Regime ◽  
Si Substrates ◽  
Ionic Size

In this study, sol–gel-processed Li-doped SnO2-based thin-film transistors (TFTs) were fabricated on SiO2/p+ Si substrates. The influence of Li dopant (wt%) on the structural, chemical, optical, and electrical characteristics was investigated. By adding 0.5 wt% Li dopant, the oxygen vacancy formation process was successfully suppressed. Its smaller ionic size and strong bonding strength made it possible for Li to work as an oxygen vacancy suppressor. The fabricated TFTs consisting of 0.5 wt% Li-doped SnO2 semiconductor films delivered the field-effect mobility in a 2.0 cm2/Vs saturation regime and Ion/Ioff value of 1 × 108 and showed enhancement mode operation. The decreased oxygen vacancy inside SnO2 TFTs with 0.5 wt% Li dopant improved the negative bias stability of TFTs.

scholarly journals Optimization of Fiber Bragg Gratings Inscribed in Thin Films Deposited on D-Shaped Optical Fibers

Sensors ◽  
2021 ◽  
Vol 21 (12) ◽  
pp. 4056
Author(s):  
José Javier Imas ◽  
Carlos R. Zamarreño ◽  
Ignacio del Villar ◽  
Ignacio R. Matías
Keyword(s):  
Thin Film ◽  
Film Thickness ◽  
Optical Fibers ◽  
Flat Surface ◽  
Sno2 Thin Film ◽  
Thin Film Thickness ◽  
A Value ◽  
Surrounding Refractive Index ◽  
Reflected Power ◽  
Fabrication Parameters

A fiber Bragg grating patterned on a SnO2 thin film deposited on the flat surface of a D-shaped polished optical fiber is studied in this work. The fabrication parameters of this structure were optimized to achieve a trade-off among reflected power, full width half maximum (FWHM), sensitivity to the surrounding refractive index (SRI), and figure of merit (FOM). In the first place, the influence of the thin film thickness, the cladding thickness between the core and the flat surface of the D-shaped fiber (neck), and the length of the D-shaped zone over the reflected power and the FWHM were assessed. Reflected peak powers in the range from −2 dB to −10 dB can be easily achieved with FWHM below 100 pm. In the second place, the sensitivity to the SRI, the FWHM, and the FOM were analyzed for variations of the SRI in the 1.33–1.4 range, the neck, and the thin-film thickness. The best sensitivities theoretically achieved for this device are next to 40 nm/RIU, while the best FOM has a value of 114 RIU−1.

Study of the quality of GaAs thin film on Si substrate by X-ray diffraction method

1990 ◽  
Vol 7 (7) ◽  
pp. 308-311
Author(s):  
Li Chaorong ◽  
Mai Zhenhong ◽  
Cui Shufan ◽  
Zhou Junming ◽  
Yutian Wang
Keyword(s):  
Thin Film ◽  
Diffraction Method ◽  
X Ray Diffraction ◽  
Si Substrate ◽  
X Ray

Numerical simulation of the liquid phase in SnO2 thin film deposition by sol-gel-dip-coating

2010 ◽  
Vol 55 (3) ◽  
pp. 385-393 ◽  
Author(s):  
Dayene M. Carvalho ◽  
Jorge L. B. Maciel ◽  
Leandro P. Ravaro ◽  
Rogério E. Garcia ◽  
Valdemir G. Ferreira ◽  
...  
Keyword(s):  
Thin Film ◽  
Numerical Simulation ◽  
Liquid Phase ◽  
Sol Gel ◽  
Thin Film Deposition ◽  
Dip Coating ◽  
Film Deposition ◽  
Sno2 Thin Film

A New Specimen for Measuring the Interfacial Toughness of Al-0.5%Cu Thin Film on Si Substrate

2005 ◽  
Vol 297-300 ◽  
pp. 521-526
Author(s):  
Insu Jeon ◽  
Masaki Omiya ◽  
Hirotsugu Inoue ◽  
Kikuo Kishimoto ◽  
Tadashi Asahina
Keyword(s):  
Thin Film ◽  
The Finite Element Method ◽  
Si Substrate ◽  
Detailed Structure ◽  
Micro Fabrication ◽  
Interfacial Toughness ◽  
Linear Elastic ◽  
Elastic Fracture ◽  
Cu Thin Film ◽  
Research Show

A new specimen is proposed to measure the interfacial toughness between the Al-0.5%Cu thin film and the Si substrate. The plain and general micro-fabrication processes are sufficient to fabricate the specimen. With the help of the finite element method and the concepts of the linear elastic fracture mechanics, the detailed structure for this specimen is modeled and evaluated. The results obtained from this research show that the proposed specimen provides efficient and convenient method to measure the interfacial toughness between the Al-Cu thin film and the Si substrate.

PREPARATION AND FERROELECTRIC PROPERTY OF (100)-ORIENTED Ca0.4Sr0.6Bi4Ti4O15 THIN FILM ON Pt/Ti/SiO2/Si SUBSTRATE

2010 ◽  
Vol 17 (05n06) ◽  
pp. 445-449 ◽  
Author(s):  
SUHUA FAN ◽  
QUANDE CHE ◽  
FENGQING ZHANG
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Ferroelectric Property ◽  
Remanent Polarization ◽  
Sol Gel ◽  
Xrd Analysis ◽  
Sem Analysis ◽  
Si Substrate ◽  
Degree Of Orientation ◽  
Equiaxed Grains

The (100)-oriented Ca0.4Sr0.6Bi4Ti4O15(C0.4S0.6BTi ) thin film was successfully prepared by a sol-gel method on Pt/Ti/SiO2/Si substrate. The orientation and formation of thin films under different annealing schedules were studied using XRD and SEM. XRD analysis indicated that (100)-oriented C0.4S0.6BTi thin film with degree of orientation of I(200)/I(119) = 1.60 was prepared by preannealing the film at 400°C for 3 min followed by rapid thermal annealing at 800°C for 5 min. SEM analysis further indicated that the (100)-oriented C0.4S0.6BTi thin film with a thickness of about 800 nm was mainly composed of equiaxed grains. The remanent polarization and coercive field of the film were 16.1 μC/cm2 and 85 kV/cm, respectively.

Near-Infrared Light Emission from of Er-Doped ZnO Thin Film in Micropits Processed on Si Substrate

2006 ◽  
Vol 320 ◽  
pp. 113-116
Author(s):  
Shigeru Tanaka ◽  
Yukari Ishikawa ◽  
Naoki Ohashi ◽  
Junichi Niitsuma ◽  
Takashi Sekiguchi ◽  
...  
Keyword(s):  
Thin Film ◽  
Near Infrared ◽  
Light Emission ◽  
Infrared Light ◽  
Zno Thin Film ◽  
Si Substrate ◽  
Near Infrared Light ◽  
Transmission Electron ◽  
Doped Zno ◽  
Er Doped

We have obtained Er-doped ZnO thin film in a micropattern of reverse trapezoids processed on Si substrate by sputtering and ultrafine polishing techniques. Near-infrared light emission was detected successfully from the thin film filling a single micropit with 10 μm square. Transmission electron microscopy (TEM) observation showed epitaxial growth of ZnO crystals along the curvature of the micropit.

Sign in / Sign up

Export Citation Format

Share Document