Modeling the equilibrium loading of gold onto activated carbon from complex cyanide solutions

2010 ◽  
Vol 27 (4) ◽  
pp. 190-195
Author(s):  
X. Dai ◽  
P. L. Breuer ◽  
M. I. Jeffrey
Keyword(s):  
Activated Carbon ◽  
Cyanide Solutions ◽  
Complex Cyanide

scholarly journals Production and Characterization of Activated Carbon from Coal for Gold Adsorption in Cyanide Solutions

2020 ◽  
Vol 40 (1) ◽  
pp. 34-44
Author(s):  
Karen L. Martínez-Mendoza ◽  
Juan Manuel Barraza Burgos ◽  
Nilson Marriaga-Cabrales ◽  
Fiderman Machuca-Martinez ◽  
Mariber Barajas ◽  
...  
Keyword(s):  
Activated Carbon ◽  
Activated Carbons ◽  
Physical Activation ◽  
Adsorption Model ◽  
Waste Solution ◽  
Synthetic Solution ◽  
Cyanide Solutions ◽  
Two Stages ◽  
Characterization Of Activated Carbon

In this work, activated carbons were produced using coal as raw matter from seven Colombian carboniferous zones. Physical activation was performed in two stages: a carbonization stage with Nitrogen at a temperature of 850 °C and a residence time of 2 h, followed by an activation stage using steam at temperatures of 700 and 850 °C with residence times of 1,5 h and 2,5 h. From the pore volume characterization for the adsorption of gold, two activated carbons from Cundinamarca, obtained at 850 °C (1,5 h), 850 °C (2,5 h), and a commercial carbon (GRC 22) were selected. Gold adsorption tests were performed with those three activated carbons using synthetic aurocyanide solutions and a gold waste solution. The data of the adsorption isotherms were adjusted using the Freundlich adsorption model for the synthetic solution, as well as Langmuir for the waste solution. The results showed that, using a solution of 1 ppm, the activated carbons C-850-2.5 and C- 850-1.5 produced the higher maximum gold loading capacities in the equilibrium (8,7 and 9,3 mg Au/g, respectively) in comparison to the commercial activated carbon (4,7 mg Au/g).  Gold adsorption test using a waste solution (21 ppm of gold) showed that the activated carbon C-850-1.5 had the highest value of adsorption capacity (4,58 mg Au/g) compared to C-850-2.5 (2,95 mgAu /g).

Thermal stability and decomposition of perfluoroalkyl substances on spent granular activated carbon

2020 ◽  
Author(s):  
Feng Xiao ◽  
Bin Yao ◽  
Pavankumar Challa Sasi ◽  
Svetlana Golovko ◽  
Dana Soli ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Activated Carbon ◽  
Granular Activated Carbon ◽  
Perfluoroalkyl Substances

Modification of activated carbon fiber pore structure by coke deposition

2001 ◽  
Vol 11 (PR3) ◽  
pp. Pr3-279-Pr3-286
Author(s):  
X. Dabou ◽  
P. Samaras ◽  
G. P. Sakellaropoulos
Keyword(s):  
Activated Carbon ◽  
Carbon Fiber ◽  
Pore Structure ◽  
Activated Carbon Fiber ◽  
Coke Deposition

Enhancing the power generation of Rhodopseudomonas palustris-based MFC

2020 ◽  
Vol 64 (1-4) ◽  
pp. 1261-1268
Author(s):  
Shu Otani ◽  
Dang-Trang Nguyen ◽  
Kozo Taguchi
Keyword(s):  
Activated Carbon ◽  
Rhodopseudomonas Palustris ◽  
Ozone Treatment ◽  
Maximum Power Density ◽  
On Demand ◽  
Long Time ◽  
Dry Conditions ◽  
Carbon Sheet ◽  
Uv Ozone

In this study, a portable and disposable paper-based microbial fuel cell (MFC) was fabricated. The MFC was powered by Rhodopseudomonas palustris bacteria (R. palustris). An activated carbon sheet-based anode pre-loaded organic matter (starch) and R. palustris was used. By using starch in the anode, R. palustris-loaded on the anode could be preserved for a long time in dry conditions. The MFC could generate electricity on-demand activated by adding water to the anode. The activated carbon sheet anode was treated by UV-ozone treatment to remove impurities and to improve its hydrophilicity before being loaded with R. palustris. The developed MFC could generate the maximum power density of 0.9 μW/cm2 and could be preserved for long-term usage with little performance degradation (10% after four weeks).

Sign in / Sign up

Export Citation Format

Share Document