Effect of Carbon Content on Eddy Current Response to Sensitization and Intergranular Corrosion In Simulated Heat-Affected Zone of Austenitic Stainless Steel

2012 ◽  
Vol 56 (5-6) ◽  
pp. 44-53 ◽  
Author(s):  
Hasan Shaikh ◽  
Natarajan Sivaibharasi ◽  
Balakrishnan Sasi ◽  
Toppo Anita ◽  
Bhagi Purna Chandra Rao ◽  
...  
Keyword(s):  
Stainless Steel ◽  
Austenitic Stainless Steel ◽  
Carbon Content ◽  
Eddy Current ◽  
Heat Affected Zone ◽  
Intergranular Corrosion ◽  
Current Response ◽  
Eddy Current Response

scholarly journals Effect of Carbon Content on Intergranular Corrosion of Welding Heat Affected Zone in 304 Stainless Steel

2019 ◽  
Vol 37 (4) ◽  
pp. 322-332 ◽  
Author(s):  
Eun-Jong Oh ◽  
Jae-Hyung Lee ◽  
Sung-Woo Cho ◽  
Won-Geun Yi ◽  
Ki-Woo Nam
Keyword(s):  
Stainless Steel ◽  
Carbon Content ◽  
Heat Affected Zone ◽  
Intergranular Corrosion ◽  
304 Stainless Steel

scholarly journals Testing of intergranular and pitting corrosion in sensitized welded joints of austenitic stainless steel

10.30544/274 ◽  
2017 ◽  
Vol 23 (2) ◽  
pp. 109-117 ◽  
Author(s):  
Bore V. Jegdic ◽  
Biljana Bobić ◽  
Milica Bošnjakov ◽  
Behar Alić
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Austenitic Stainless Steel ◽  
Weld Metal ◽  
Base Metal ◽  
Pitting Corrosion ◽  
Heat Affected Zone ◽  
Intergranular Corrosion ◽  
Chromium Concentration ◽  
Pitting Corrosion Resistance

Pitting corrosion resistance and intergranular corrosion of the austenitic stainless steel X5Cr Ni18-10 were tested on the base metal, heat affected zone and weld metal. Testing of pitting corrosion was performed by the potentiodynamic polarization method, while testing of intergranular corrosion was performed by the method of electrochemical potentiokinetic reactivation with double loop. The base metal was completely resistant to intergranular corrosion, while the heat affected zone showed a slight susceptibility to intergranular corrosion. Indicators of pitting corrosion resistance for the weld metal and the base metal were very similar, but their values are significantly higher than the values for the heat affected zone. This was caused by reduction of the chromium concentration in the grain boundary areas in the heat affected zone, even though the carbon content in the examined stainless steel is low (0.04 wt. % C).

SANDVIK 5R75

Alloy Digest ◽  
2000 ◽  
Vol 49 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Austenitic Stainless Steel ◽  
Physical Properties ◽  
Intergranular Corrosion ◽  
Heat Treating ◽  
Steel Company ◽  
Temperature Performance

Abstract Sandvik 5R75 is a molybdenum-containing austenitic stainless steel with titanium added to prevent intergranular corrosion by tying up the carbon. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-777. Producer or source: Sandvik Steel Company. Originally published March 2000, corrected November 2000.

ALZ 321

Alloy Digest ◽  
2001 ◽  
Vol 50 (4) ◽  
Keyword(s):  
Mechanical Properties ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Austenitic Stainless Steel ◽  
Physical Properties ◽  
Tensile Properties ◽  
Intergranular Corrosion ◽  
Heat Treating

Abstract ALZ 321 is an austenitic stainless steel with good cold formability, corrosion resistance, toughness, and mechanical properties. The addition of titanium improves the resistance to intergranular corrosion in welds and slower cooling sections. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, and machining. Filing Code: SS-821. Producer or source: ALZ nv.

scholarly journals Microstructure and Mechanical Properties of Heat-Affected Zone of Repeated Welding AISI 304N Austenitic Stainless Steel by Gleeble Simulator

Metals ◽  
2018 ◽  
Vol 8 (10) ◽  
pp. 773
Author(s):  
Y.H. Guo ◽  
Li Lin ◽  
Donghui Zhang ◽  
Lili Liu ◽  
M.K. Lei
Keyword(s):  
Mechanical Properties ◽  
Stainless Steel ◽  
Austenitic Stainless Steel ◽  
Impact Energy ◽  
Heat Affected Zone ◽  
Ferrite Content ◽  
Equipment Safety ◽  
Microstructure And Mechanical Properties ◽  
Δ Ferrite ◽  
The Impact

Heat-affected zone (HAZ) of welding joints critical to the equipment safety service are commonly repeatedly welded in industries. Thus, the effects of repeated welding up to six times on the microstructure and mechanical properties of HAZ for AISI 304N austenitic stainless steel specimens were investigated by a Gleeble simulator. The temperature field of HAZ was measured by in situ thermocouples. The as-welded and one to five times repeated welding were assigned as-welded (AW) and repeated welding 1–5 times (RW1–RW5), respectively. The austenitic matrices with the δ-ferrite were observed in all specimens by the metallography. The δ-ferrite content was also determined using magnetic and metallography methods. The δ-ferrite had a lathy structure with a content of 0.69–3.13 vol.%. The austenitic grains were equiaxial with an average size of 41.4–47.3 μm. The ultimate tensile strength (UTS) and yield strength (YS) mainly depended on the δ-ferrite content; otherwise, the impact energy mainly depended on both the austenitic grain size and the δ-ferrite content. The UTS of the RW1–RW3 specimens was above 550 MPa following the American Society of Mechanical Engineers (ASME) standard. The impact energy of all specimens was higher than that in ASME standard at about 56 J. The repeated welding up to three times could still meet the requirements for strength and toughness of welding specifications.

CARTECH 321

Alloy Digest ◽  
2021 ◽  
Vol 70 (8) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Austenitic Stainless Steel ◽  
Titanium Carbide ◽  
Physical Properties ◽  
Tensile Properties ◽  
Intergranular Corrosion ◽  
Heat Treating ◽  
Technology Corporation ◽  
Carpenter Technology Corporation

Abstract CarTech 321 is a titanium-stabilized chromium-nickel austenitic stainless steel that was developed to provide the performance of an 18-8 austenitic stainless steel with improved intergranular corrosion resistance. Since titanium has a stronger affinity for carbon than chromium, titanium carbide tends to precipitate randomly within the grains instead of forming continuous patterns at the grain boundaries. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1338. Producer or source: Carpenter Technology Corporation.

Sign in / Sign up

Export Citation Format

Share Document