Self-contained measuring system with wireless data transfer

2008 ◽  
Vol 8 (9) ◽  
pp. 38-43
Author(s):  
Marco Mueller
Keyword(s):  
Data Transfer ◽  
Measuring System ◽  
Wireless Data

Discrete Portable Measuring Device for Monitoring Noninvasive Intraocular Pressure with a Nano-Structured Sensing Contact Lens Prototype

2012 ◽  
pp. 214-229
Author(s):  
Ana Moya ◽  
Anton Guimerà ◽  
Irene Sánchez ◽  
Vladimir Laukin ◽  
Raúl Martín ◽  
...  
Keyword(s):  
Intraocular Pressure ◽  
Contact Lens ◽  
Data Transfer ◽  
Measurement Instrument ◽  
Measuring System ◽  
Wireless Data ◽  
Film Sensor ◽  
Measuring Device ◽  
Electronic Measurement ◽  
Contact Lens Sensor

A new portable measuring device for monitoring intraocular pressure with a non invasive system using a prototype of contact lens has been developed. The contact lens is based on a new organic flexible highly piezo-resisitive film sensor that is glued to the central hole of a lens. The measuring system is wire connected to the contact lens and incorporates user interface methods and a Bluetooth link for bi-directional wireless data transfer. The key design aspects of such architecture are discussed in this paper. The system is designed with an architecture that can be integrated in the future in order to be placed in the contact lens. The discrete system is used to validate the electronic measurement operation and the contact lens sensor (CLS). The measurement instrument can calibrate the differences of the nominal value of the sensor and measure resistances variations that are related to pressure variations. The measuring system and the contact lens sensor were tested with an eye phantom and with enucleated pig eyes by applying pressure changes between 7 to 32 mmHg recording the electrical changes with the portable device.

Discrete Portable Measuring Device for Monitoring Noninvasive Intraocular Pressure with a Nano-Structured Sensing Contact Lens Prototype

2011 ◽  
Vol 2 (4) ◽  
pp. 1-19
Author(s):  
Ana Moya ◽  
Anton Guimerà ◽  
Irene Sánchez ◽  
Vladimir Laukin ◽  
Raúl Martín ◽  
...  
Keyword(s):  
Intraocular Pressure ◽  
Contact Lens ◽  
Data Transfer ◽  
Measurement Instrument ◽  
Measuring System ◽  
Wireless Data ◽  
Film Sensor ◽  
Measuring Device ◽  
Electronic Measurement ◽  
Contact Lens Sensor

A new portable measuring device for monitoring intraocular pressure with a non invasive system using a prototype of contact lens has been developed. The contact lens is based on a new organic flexible highly piezo-resisitive film sensor that is glued to the central hole of a lens. The measuring system is wire connected to the contact lens and incorporates user interface methods and a Bluetooth link for bi-directional wireless data transfer. The key design aspects of such architecture are discussed in this paper. The system is designed with an architecture that can be integrated in the future in order to be placed in the contact lens. The discrete system is used to validate the electronic measurement operation and the contact lens sensor (CLS). The measurement instrument can calibrate the differences of the nominal value of the sensor and measure resistances variations that are related to pressure variations. The measuring system and the contact lens sensor were tested with an eye phantom and with enucleated pig eyes by applying pressure changes between 7 to 32 mmHg recording the electrical changes with the portable device.

Wireless Data Transfer in under Water System

2017 ◽  
Author(s):  
S. Sangeetha ◽  
Santhi Priya ◽  
K. S. Saranya ◽  
S. Saranya ◽  
T. Jayasimha
Keyword(s):  
Data Transfer ◽  
Water System ◽  
Wireless Data

scholarly journals Cooperative synchronization control of intelligent lifting systems with actuator failures

2018 ◽  
Vol 10 (12) ◽  
pp. 168781401881349
Author(s):  
Lijing Dong
Keyword(s):  
Data Transfer ◽  
Synchronization Error ◽  
Synchronization Control ◽  
Wireless Data ◽  
Hydraulic Actuators ◽  
Actuator Failures ◽  
Distributed Controller ◽  
Transfer Unit ◽  
Distributed Synchronization ◽  
Lifting System

Synchronization of a large-scale lifting system with hydraulic actuator failures is investigated in this article. The lifting system is composed of multiple intelligent lifting subsystems with hydraulic actuators, wireless data transfer unit, and distributed controller. During the lifting process, the hydraulic actuators are possible to be malfunctioned. Once actuator failure occurs, the number of lifting points and the communication topology would change over different time intervals. This article proposes a distributed synchronization control method and adopts switching technique in analyzing the lifting synchronization. The distributed controller is designed with information received from around subsystems through wireless data transfer unit rather than with direct reference signal from the control station. On the basis of Lyapunov stability theory and switched technique, sufficient conditions that guarantee the synchronization of the lifting system with actuator failures are achieved, and synchronization errors can be reduced as small as desired. Finally, the effectiveness of proposed distributed synchronization controller is verified by numerical simulations conducted on AMESim platform. From the simulation results, it can be seen that when actuator failures occur, the synchronization error of the remaining lifting subsystems is less than 5%. The lifting synchronization error shrinks to 5% in 5.87 s when a broke-down subsystem returns to normal.

scholarly journals Time Domain Spectroscopy/Imaging and Wireless Data Transfer Technologies with Terahertz Wave

2010 ◽  
Vol 19 (3) ◽  
pp. 12
Author(s):  
Mun Cheol PAEK ◽  
Min Hwan KWAK ◽  
Sungil KIM ◽  
Seung Beom KANG ◽  
Hancheol RYU ◽  
...  
Keyword(s):  
Time Domain ◽  
Data Transfer ◽  
Terahertz Wave ◽  
Wireless Data ◽  
Time Domain Spectroscopy

scholarly journals A Comprehensive Study and Analysis of LEACH and HEED Routing Protocols for Wireless Sensor Networks – With Suggestion for Improvements

2018 ◽  
Vol 9 (3) ◽  
pp. 778 ◽  
Author(s):  
G. Anitha ◽  
V. Vijayakumari ◽  
S. Thangavelu
Keyword(s):  
Information Transfer ◽  
Data Transfer ◽  
Routing Algorithm ◽  
Local Network ◽  
Wireless Data ◽  
The World ◽  
End Of The World ◽  
Set Up ◽  
Point To Point ◽  
5 Ghz

<p>The main interesting aspect of the digital era is the widely spread ease of communication from one end of the world to the other end of the world. There is a revolution in communication, digitalization, globalization, video calling, wireless data transfer and this is possible due to networking. Initially computer networks is the data sharing where data such as documents, file, reports, presentation files, videos, images etc can be shared within a local network or remotely connected networks. Traditional data networking is to empower end-to-end information transfer. The data in such networks are carried across point-to-point links and the intermediate nodes just forward the packets, where the payload of the packets is not modified. Traditional LANs need wires, which may be difficult to set up in some situations.</p><p>It is very much understandable and clearly visible that wired communication is being completely overtaken by wireless technologies in the recent past. Wireless LANs, by its very nature, empowers with increased mobility and flexibility. Wi-Fi devices get connected to the internet through WLAN and access points. 2.4 GHz and 5 GHz ISM bands are used by Wi-Fi. Also, it is to be understood that, a wireless adhoc network is distributed in its nature. It is also to be noted that, the adhoc nature makes these network to rely on any of the pre-existing infrastructure. The data forwarding shall happen from the nodes very much dynamically based on the connectivity and the routing algorithm used.  </p>

scholarly journals DEVELOPMENT OF CENTRALIZED COMPUTER DATA COLLECTION SYSTEM FROM ANALOG SENSORS

2021 ◽  
Vol 297 (3) ◽  
pp. 46-50
Author(s):  
Volodymyr STATSENKO ◽  
◽  
Oleksandr BURMISTENKOV ◽  
Tetiana BILA ◽  
Dmytro STATSENKO ◽  
...  
Keyword(s):  
Data Collection ◽  
Information Transfer ◽  
Data Transfer ◽  
Design Parameters ◽  
Collection System ◽  
Wireless Data ◽  
Computer Data ◽  
Data Collection System ◽  
Advantages And Disadvantages ◽  
The One

The article presents the architecture and operation principles of the system for collecting and analyzing information from strain gauges. These systems are used to determine the equipment performance for transporting a variety of materials. In particular, they are used to control the movement of bulk materials mixtures components. For such technological processes, it is fundamentally important to ensure constant flows intensity. The paper identifies three variants of sensor connection schemes, analyzes their advantages and disadvantages. It is established that the structure “one ADC – several sensors” allows to reduce equipment costs and at the same time to provide the minimum parameters influence of a transmission line on a useful sensor signal. The “one-to-one” scheme provides the connection of each sensor to its own ADC. “Circuit with multiplexer” allows to increase the number of sensors connected to one ADC. It is established that the best option in terms of reducing the interference effects on the analog signal and the cost of creating a system is the scheme “one ADC – several sensors”. The algorithm of information transfer from ADC to microcontroller (MC) is analysed. It is calculated that HX711 ADC chips provide the maximum data rate of 18.5 values/s. It is proposed to transfer data between the MC and the server using the TCP protocol because it avoids data loss and provides the necessary data transfer speed. The structure and formats of data that are transmitted from the mass sensor to the ADC, microcontroller, web server and database are proposed. The main speed, design parameters, advantages and disadvantages of wired and wireless data network between MK and the server are determined. Recommendations for the design of such a network depending on the characteristics of the premises in which the data collection system will be used have been developed.

Sign in / Sign up

Export Citation Format

Share Document