Finite element analysis on grain boundary diffusion controlled cavity growth during high temperature fatigue

1996 ◽  
Vol 2 (4) ◽  
pp. 227-232
Author(s):  
J. J. Kim ◽  
S. W. Nam
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
High Temperature ◽  
Grain Boundary ◽  
Boundary Diffusion ◽  
Cavity Growth ◽  
Grain Boundary Diffusion ◽  
Element Analysis ◽  
High Temperature Fatigue ◽  
Diffusion Controlled

Effect of Elastic Accommodation on Diffusion-Controlled Cavity Growth in Metals

2000 ◽  
Vol 122 (3) ◽  
pp. 294-299
Author(s):  
R. Mohan ◽  
J. Zhang ◽  
F. W. Brust
Keyword(s):  
Grain Boundary ◽  
Growth Rates ◽  
Void Growth ◽  
Boundary Diffusion ◽  
Virtual Work ◽  
Cell Model ◽  
Cavity Growth ◽  
Grain Boundary Diffusion ◽  
Transient Time ◽  
Diffusion Controlled

The effect of elastic accommodation on the grain boundary diffusion-controlled void growth was analyzed using an axisymmetric unit cell model. An incremental form of the virtual work principle was used to formulate the boundary value problem involving grain boundary diffusion. The model accounts for material elasticity and void interaction effects. Analyses are performed for initially spherical voids spaced periodically along the grain boundary. The results of the analyses on void growth rates agree well with the Hull-Rimmer model after the initial transient time. During the elastic transient, void growth rates can be several orders of magnitude higher than the steady state growth rate. Though the elastic transient time may occupy a small portion of the total rupture time, in metallic components experiencing cyclic loading conditions with short hold times, elasticity effects may be important. [S0094-4289(00)00903-8]

Creep Modeling of Welded Joints Using the Theta Projection Concept and Finite Element Analysis

1999 ◽  
Vol 122 (1) ◽  
pp. 22-26 ◽  
Author(s):  
M. Law ◽  
W. Payten ◽  
K. Snowden
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
High Temperature ◽  
Welded Joints ◽  
Creep Model ◽  
Projection Data ◽  
Predictive Capability ◽  
Element Analysis ◽  
High Temperature And Pressure ◽  
Temperature And Pressure

Modeling of welded joints under creep conditions with finite element analysis was undertaken using the theta projection method. The results were compared to modeling based on a simple Norton law. Theta projection data extends the accuracy and predictive capability of finite element modeling of critical structures operating at high temperature and pressure. In some cases analyzed, it was found that the results diverged from those gained using a Norton law creep model. [S0094-9930(00)00601-6]

Creep Life Simulation and Assessment of High Temperature Piping Systems and Components

2012 ◽  
Author(s):  
Brian Rose ◽  
James Widrig
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
High Temperature ◽  
Creep Behavior ◽  
Material Behavior ◽  
Piping System ◽  
Remaining Life ◽  
Creep Life ◽  
Element Analysis ◽  
Piping Systems

High temperature piping systems and associated components, elbows and bellows in particular, are vulnerable to damage from creep. The creep behavior of the system is simulated using finite element analysis (FEA). Material behavior and damage is characterized using the MPC Omega law, which captures creep embrittlement. Elbow elements provide rapid yet accurate modeling of pinching of piping, which consumes a major portion of the creep life. The simulation is used to estimate the remaining life of the piping system, evaluate the adequacy of existing bellows and spring can supports and explore remediation options.

An Evaluation of Creep-Fatigue Damage for the Prototype Process Heat Exchanger of the NHDD Plant

2011 ◽  
Vol 133 (5) ◽  
Author(s):  
Hyeong-Yeon Lee ◽  
Kee-Nam Song ◽  
Yong-Wan Kim ◽  
Sung-Deok Hong ◽  
Hong-Yune Park
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
High Temperature ◽  
Fatigue Damage ◽  
Inlet Temperature ◽  
Alloy 617 ◽  
Element Analysis ◽  
Creep Fatigue ◽  
Process Heat ◽  
Very High

A process heat exchanger (PHE) transfers the heat generated from a nuclear reactor to a sulfur-iodine hydrogen production system in the Nuclear Hydrogen Development and Demonstration, and was subjected to very high temperature up to 950°C. An evaluation of creep-fatigue damage, for a prototype PHE, has been carried out from finite element analysis with the full three dimensional model of the PHE. The inlet temperature in the primary side of the PHE was 950°C with an internal pressure of 7 MPa, while the inlet temperature in the secondary side of the PHE is 500°C with internal pressure of 4 MPa. The candidate materials of the PHE were Alloy 617 and Hastelloy X. In this study, only the Alloy 617 was considered because the high temperature design code is available only for Alloy 617. Using the full 3D finite element analysis on the PHE model, creep-fatigue damage evaluation at very high temperature was carried out, according to the ASME Draft Code Case for Alloy 617, and technical issues in the Draft Code Case were raised.

Damage Evaluation of Grade 91 Thick Cylinder Under Variable Thermal Cyclic Loading Using Continuum Damage Coupled Viscoplastic Models

2019 ◽  
Author(s):  
Nazrul Islam ◽  
Tasnim Hassan
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
High Temperature ◽  
Creep Deformation ◽  
Continuum Damage ◽  
Element Analysis ◽  
Energy Agency ◽  
Creep Fatigue ◽  
Thick Cylinder ◽  
Grade 91

Abstract This study evaluates creep-fatigue damage in the modified Grade 91 thick-cylinder tested by Japan Atomic Energy Agency (JAEA), to understand the failure mechanism of critical components of Fast Reactor nuclear plants. As modified Grade 91 demonstrated creep-fatigue interaction induced failure mechanisms, finite element analysis of high-temperature components will require a unified constitutive model (UCM) that can simulate various creep-fatigue responses with reasonable accuracy. Hence, a UCM coupled with various advanced modeling features including the continuum damage modeling features is investigated to demonstrate their predictability of the fatigue, creep and creep-fatigue responses of the modified Grade 91 steel. The modified UCM is implemented into ABAQUS for analysis of creep deformation in the thick cylinder benchmark problem. Finite element analysis results are presented to demonstrate how the thermal cycling influences the creep-deformation of this high-temperature component. It is also demonstrated how thermal cycling’s influence on fatigue life can be determined based on the damage variable incorporated in the UCM.

Sign in / Sign up

Export Citation Format

Share Document