Acoustic emission method of technical diagnosis of power plants

1997 ◽  
Vol 31 (7) ◽  
pp. 409-411
Author(s):  
V. N. Byrin
Keyword(s):  
Acoustic Emission ◽  
Power Plants ◽  
Acoustic Emission Method ◽  
Emission Method ◽  
Technical Diagnosis

scholarly journals Monitoring of the Impact of Lithium Nitrate on the Alkali–aggregate Reaction Using Acoustic Emission Methods

Materials ◽  
2018 ◽  
Vol 12 (1) ◽  
pp. 20
Author(s):  
Justyna Zapała-Sławeta ◽  
Grzegorz Świt
Keyword(s):  
Acoustic Emission ◽  
Initial Reaction ◽  
Lithium Nitrate ◽  
Acoustic Emission Method ◽  
Emission Method ◽  
Acoustic Activity ◽  
Initial Stage ◽  
Chemical Admixture ◽  
Different Characteristics ◽  
The Impact

The study analyzed the possibility of using the acoustic emission method to analyse the reaction of alkali with aggregate in the presence of lithium nitrate. Lithium nitrate is a chemical admixture used to reduce adverse effects of corrosion. The tests were carried out using mortars with reactive opal aggregate, stored under the conditions defined by ASTM C227. The acoustic activity of mortars with a corrosion inhibitor was referred to linear changes and microstructure of specimens in the initial reaction stages. The study found a low acoustic activity of mortars with lithium nitrate. Analysis of characteristic parameters of acoustic emission signals, combined with the observation of changes in the microstructure, made it possible to describe the corrosion processes. As the reaction progressed, signals with different characteristics were recorded, indicating aggregate cracking at the initial stage of the reaction, followed by cracking of the cement paste. The results, which were referred to the acoustic activity of reference mortars, confirmed that the reaction of opal aggregate with alkali was mitigated in mortars with lithium nitrate, and the applied acoustic emission method enabled the detection and monitoring of ASR progress.

Three-Point Bending Test Evaluation of Concrete Specimens by Non-Traditional Analysis of Acoustic Emission Method

2016 ◽  
Vol 837 ◽  
pp. 198-202
Author(s):  
Luboš Pazdera ◽  
Libor Topolář ◽  
Tomáš Vymazal ◽  
Petr Daněk ◽  
Jaroslav Smutny
Keyword(s):  
Acoustic Emission ◽  
Signal Analysis ◽  
Measurement Data ◽  
Bending Test ◽  
Test Evaluation ◽  
Acoustic Emission Method ◽  
Emission Method ◽  
Three Point Bending ◽  
Time Frequency ◽  
Emission Signal

The aim of the paper is focused on the analysis of the mechanical properties of the concrete specimens with plasticizer at three point bending test by the signal analysis of the acoustic emission signal. The evaluations were compared the measurement and the results obtained with theoretical presumptions. The Joint Time Frequency Analysis applied on measurement data and its evaluation is described. It is well known that the Acoustic Emission Method is a very sensitive method to determine active cracks into structure. However, evaluation of acoustic emission signals is very difficult. A non-traditional method was used to signal analysis of burst acoustic emission signals recorded during three point bending test.

Evaluation of Friction Phenomena of Brake Pads by Acoustic Emission Method

2014 ◽  
Vol 7 (2) ◽  
pp. 703-709 ◽  
Author(s):  
Kazuho Mizuta ◽  
Yukio Nishizawa ◽  
Koji Sugimoto ◽  
Katsuya Okayama ◽  
Alan Hase
Keyword(s):  
Acoustic Emission ◽  
Acoustic Emission Method ◽  
Emission Method ◽  
Brake Pads

scholarly journals Characterization of Fatigue Damage in 304L Steel by an Acoustic Emission Method

2013 ◽  
Vol 66 ◽  
pp. 651-660 ◽  
Author(s):  
A. Ould Amer ◽  
A.-L. Gloanec ◽  
S. Courtin ◽  
C. Touze
Keyword(s):  
Acoustic Emission ◽  
Fatigue Damage ◽  
Acoustic Emission Method ◽  
Emission Method ◽  
304L Steel
Sign in / Sign up

Export Citation Format

Share Document