Determination of the vortex-glass melting transition in YBa2Cu3O7 by phasesensitive current-voltage measurements

1996 ◽  
Vol 46 (S3) ◽  
pp. 1567-1568
Author(s):  
Wolfgang Lang ◽  
Christof Fussenegger
Solar RRL ◽  
2021 ◽  
Author(s):  
Anh Dinh Bui ◽  
Md Arafat Mahmud ◽  
Naeimeh Mozaffari ◽  
Rabin Basnet ◽  
The Duong ◽  
...  

2004 ◽  
Vol 27 (2) ◽  
pp. 61-67
Author(s):  
S. Dib ◽  
C. Salame ◽  
N. Toufik ◽  
A. Khoury ◽  
F. Pélanchon ◽  
...  

A new method for the extraction of junction parameters from a description of the current–voltage characteristic is developed. A simulation is performed and a high accuracy is obtained for the determination of the singleexponential model parameters. The method is easy to implement in a control process for device characterization. An application, achieved to observe the degradation of the emitter–base junction of a bipolar transistor during an aging experiment, shows that the evolutions of the single exponential model parameters versus time introduce a means for degradation quantification.


2000 ◽  
Vol 22 (3) ◽  
pp. 157-163 ◽  
Author(s):  
S. Dib ◽  
M. De La Bardonnie ◽  
A. Khoury ◽  
F. Pelanchon ◽  
P. Mialhe

A new method for extracting junction parameters of the single diode model is presented. A least squares method approach considers the deviation ∆V=f(I) between the experimental current-voltage (I-V) characteristic and a theoretical arbitrary characteristic. A specific case- the ∆V graph reducing to a straight line–is identified and the knowledge of the slope and of the intercept with the ordinate axis leads to the determination of the junction parameters. The method is applied to the characterization of the emitter-base junction of transistors and the results are discussed.


Photonics ◽  
2021 ◽  
Vol 8 (10) ◽  
pp. 412
Author(s):  
Takaho Asai ◽  
Seigo Ito ◽  
Takayuki Makino

We applied room-temperature photoluminescence (PL) spectroscopy for the compositional engineering of a CH3NH3Pb(Cl,I)3 light harvester in an alloy-based perovskite solar cell. This spectroscopic characterization determines the optimal Cl concentration where the power conversion efficiency shows its maximum in a contactless and non-destructive manner. The PL quenching ratio evaluated from the comparative PL studies between the films grown on glass/ZrO2 and SnO2:F/TiO2 substrates exhibited its maximum at a Cl concentration of 10 mol%, which agrees with the Cl concentration determined from the current–voltage measurement-based device performance. We also discuss the possible reasons for the coincidence mentioned above regarding the charge extraction effect induced by Cl incorporation.


2015 ◽  
Vol 32 (4) ◽  
pp. 831-836 ◽  
Author(s):  
T. Scarazzato ◽  
D. C. Buzzi ◽  
A. M Bernardes ◽  
J. A. S. Tenório ◽  
D. C. R. Espinosa

Sign in / Sign up

Export Citation Format

Share Document