scholarly journals Contactless Determination of Optimal Chloride Concentration for Power Conversion Efficiency in CH3NH3Pb(Cl,I)3 Using Photoluminescence Spectroscopy

Photonics ◽  
2021 ◽  
Vol 8 (10) ◽  
pp. 412
Author(s):  
Takaho Asai ◽  
Seigo Ito ◽  
Takayuki Makino
Keyword(s):  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Power Conversion ◽  
Chloride Concentration ◽  
Spectroscopic Characterization ◽  
Voltage Measurement ◽  
Current Voltage ◽  
Non Destructive ◽  
Pl Quenching

We applied room-temperature photoluminescence (PL) spectroscopy for the compositional engineering of a CH3NH3Pb(Cl,I)3 light harvester in an alloy-based perovskite solar cell. This spectroscopic characterization determines the optimal Cl concentration where the power conversion efficiency shows its maximum in a contactless and non-destructive manner. The PL quenching ratio evaluated from the comparative PL studies between the films grown on glass/ZrO2 and SnO2:F/TiO2 substrates exhibited its maximum at a Cl concentration of 10 mol%, which agrees with the Cl concentration determined from the current–voltage measurement-based device performance. We also discuss the possible reasons for the coincidence mentioned above regarding the charge extraction effect induced by Cl incorporation.

scholarly journals A Physics-Based Analytical Model for Current–Voltage Characteristics of Perovskite Solar Cells Incorporating Bulk Recombination

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3868
Author(s):  
M. Zahangir Kabir
Keyword(s):  
Solar Cells ◽  
Charge Carrier ◽  
Power Conversion Efficiency ◽  
Analytical Model ◽  
Conversion Efficiency ◽  
Carrier Transport ◽  
Power Conversion ◽  
Perovskite Solar Cells ◽  
Current Voltage ◽  
Current Voltage Characteristics

A physics-based compact analytical model for studying the current–voltage characteristics of perovskite solar cells has been proposed by considering the external voltage-dependent carrier transport, exponential photon absorption, and bulk charge carrier recombination. The explicit analytical expressions for both the forward dark and photocurrents in perovskite solar cells are derived. The current in the external circuit is calculated considering the actual solar spectrum. The mathematical models are verified and useful physical parameters are extracted by comparing the model calculations with the published experimental results on various perovskite solar cells. The proposed model shows excellent agreement with the experimental results. The power conversion efficiency can be improved further by enhancing the carrier transport in the perovskite layer. The improvement in charge carrier transport enhances the fill factor and hence the power conversion efficiency.

scholarly journals Determination of unique power conversion efficiency of solar cell showing hysteresis in the I-V curve under various light intensities

2017 ◽  
Vol 7 (1) ◽  
Author(s):  
Ludmila Cojocaru ◽  
Satoshi Uchida ◽  
Koichi Tamaki ◽  
Piyankarage V. V. Jayaweera ◽  
Shoji Kaneko ◽  
...  
Keyword(s):  
Solar Cell ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Power Conversion ◽  
Light Intensities ◽  
Unique Power

A thiourea additive-based quadruple cation lead halide perovskite with an ultra-large grain size for efficient perovskite solar cells

Nanoscale ◽  
2019 ◽  
Vol 11 (45) ◽  
pp. 21824-21833 ◽  
Author(s):  
Jyoti V. Patil ◽  
Sawanta S. Mali ◽  
Chang Kook Hong
Keyword(s):  
Thin Films ◽  
Grain Size ◽  
Solar Cells ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Power Conversion ◽  
Perovskite Solar Cells ◽  
Inorganic Perovskite ◽  
Halide Perovskite ◽  
Lead Halide

Controlling the grain size of the organic–inorganic perovskite thin films using thiourea additives now crossing 2 μm size with >20% power conversion efficiency.

The Effect of Donor Molecular Structure on Power Conversion Efficiency of Small-Molecule-Based Organic Solar Cells

2019 ◽  
Vol 16 (3) ◽  
pp. 236-243 ◽  
Author(s):  
Hui Zhang ◽  
Yibing Ma ◽  
Youyi Sun ◽  
Jialei Liu ◽  
Yaqing Liu ◽  
...  
Keyword(s):  
Molecular Structure ◽  
Solar Cells ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Small Molecule ◽  
Organic Solar Cells ◽  
Molecular Design ◽  
Power Conversion ◽  
The Relationship

In this review, small-molecule donors for application in organic solar cells reported in the last three years are highlighted. Especially, the effect of donor molecular structure on power conversion efficiency of organic solar cells is reported in detail. Furthermore, the mechanism is proposed and discussed for explaining the relationship between structure and power conversion efficiency. These results and discussions draw some rules for rational donor molecular design, which is very important for further improving the power conversion efficiency of organic solar cells based on the small-molecule donor.

Enhanced efficacy of defect passivation and charge extraction for efficient perovskite photovoltaics with a small open circuit voltage loss

2019 ◽  
Vol 7 (15) ◽  
pp. 9025-9033 ◽  
Author(s):  
Jin-Feng Liao ◽  
Wu-Qiang Wu ◽  
Jun-Xing Zhong ◽  
Yong Jiang ◽  
Lianzhou Wang ◽  
...  
Keyword(s):  
Grain Boundary ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Open Circuit Voltage ◽  
Power Conversion ◽  
Charge Recombination ◽  
Open Circuit ◽  
Polymeric Semiconductor ◽  
Voltage Loss ◽  
Defect Passivation

A multifunctional 2D polymeric semiconductor was incorporated to provide surprisingly robust efficacy in grain boundary functionalization and defect passivation of perovskite, which suppresses charge recombination and thus affording an illustrious photovoltage of 1.16 V and power conversion efficiency of 21.1%.

scholarly journals High performance tandem organic solar cells via a strongly infrared-absorbing narrow bandgap acceptor

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Zhenrong Jia ◽  
Shucheng Qin ◽  
Lei Meng ◽  
Qing Ma ◽  
Indunil Angunawela ◽  
...  
Keyword(s):  
Solar Cells ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Organic Solar Cells ◽  
High Performance ◽  
Short Circuit ◽  
Power Conversion ◽  
High Power Conversion Efficiency ◽  
Device Structure ◽  
Narrow Bandgap

AbstractTandem organic solar cells are based on the device structure monolithically connecting two solar cells to broaden overall absorption spectrum and utilize the photon energy more efficiently. Herein, we demonstrate a simple strategy of inserting a double bond between the central core and end groups of the small molecule acceptor Y6 to extend its conjugation length and absorption range. As a result, a new narrow bandgap acceptor BTPV-4F was synthesized with an optical bandgap of 1.21 eV. The single-junction devices based on BTPV-4F as acceptor achieved a power conversion efficiency of over 13.4% with a high short-circuit current density of 28.9 mA cm−2. With adopting BTPV-4F as the rear cell acceptor material, the resulting tandem devices reached a high power conversion efficiency of over 16.4% with good photostability. The results indicate that BTPV-4F is an efficient infrared-absorbing narrow bandgap acceptor and has great potential to be applied into tandem organic solar cells.

Renovating electrical power-to-TEM00 mode laser power conversion efficiency with four-lamp/four-rod pumping scheme

2021 ◽  
pp. 1-11
Author(s):  
Miguel Catela ◽  
Dawei Liang ◽  
Cláudia R. Vistas ◽  
Dário Garcia ◽  
Bruno D. Tibúrcio ◽  
...  
Keyword(s):  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Laser Power ◽  
Power Conversion ◽  
Electrical Power ◽  
Mode Laser ◽  
Tem00 Mode

scholarly journals Digital printing of a novel electrode for stable flexible organic solar cells with a power conversion efficiency of 8.5%

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
S. Wageh ◽  
Mahfoudh Raïssi ◽  
Thomas Berthelot ◽  
Matthieu Laurent ◽  
Didier Rousseau ◽  
...  
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Organic Solar Cells ◽  
Power Conversion ◽  
Transport Layer ◽  
Electron Transport Layer ◽  
Solution Processed ◽  
Transparent Conducting

AbstractPoly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) mixed with single-wall nanotubes (SWNTs) (10:1) and doped with (0.1 M) perchloric acid (HClO4) in a solution-processed film, working as an excellent thin transparent conducting film (TCF) in organic solar cells, was investigated. This new electrode structure can be an outstanding substitute for conventional indium tin oxide (ITO) for applications in flexible solar cells due to the potential of attaining high transparency with enhanced conductivity, good flexibility, and good durability via a low-cost process over a large area. In addition, solution-processed vanadium oxide (VOx) doped with a small amount of PEDOT-PSS(PH1000) can be applied as a hole transport layer (HTL) for achieving high efficiency and stability. From these viewpoints, we investigate the benefit of using printed SWNTs-PEDOT-PSS doped with HClO4 as a transparent conducting electrode in a flexible organic solar cell. Additionally, we applied a VOx-PEDOT-PSS thin film as a hole transporting layer and a blend of PTB7 (polythieno[3,4-b] thiophene/benzodithiophene): PC71BM (phenyl-C71-butyric acid methyl ester) as an active layer in devices. Zinc oxide (ZnO) nanoparticles were applied as an electron transport layer and Ag was used as the top electrode. The proposed solar cell structure showed an enhancement in short-circuit current, power conversion efficiency, and stability relative to a conventional cell based on ITO. This result suggests a great carrier injection throughout the interfacial layer, high conductivity and transparency, as well as firm adherence for the new electrode.

Sign in / Sign up

Export Citation Format

Share Document