Sol-gel synthesis of potassium titanyl phosphate: Solution chemistry and gelation

1997 ◽  
Vol 9 (2) ◽  
pp. 183-199 ◽  
Author(s):  
Christophe J. Barbé ◽  
Mark A. Harmer ◽  
George W. Scherer
Keyword(s):  
Sol Gel ◽  
Solution Chemistry ◽  
Potassium Titanyl Phosphate ◽  
Phosphate Solution ◽  
Sol Gel Synthesis

Sol-Gel Synthesis of Rare Earth Aluminate Films as Buffer Layers for High Tc Superconducting Films

1997 ◽  
Vol 495 ◽  
Author(s):  
David B. Beach ◽  
Catherine E. Vallet ◽  
Mariappan Paranthaman ◽  
Eliot D. Specht ◽  
Jonathan S. Morrell ◽  
...  
Keyword(s):  
Rare Earth ◽  
Cuprate Superconductors ◽  
Sol Gel ◽  
Epitaxial Films ◽  
Solution Chemistry ◽  
Buffer Layers ◽  
High Tc ◽  
Oxide Substrates ◽  
Research Plan ◽  
Sol Gel Synthesis

ABSTRACTCubic rare-earth aluminate perovskites of the general form REAIO3 have been identified as possible buffer layers for high current carrying cuprate superconductors deposited on roll-textured metals. This paper describes on-going research to develop solution routes which would avoid the use of slow and costly vacuum processing. Our research plan includes the development of an appropriate solution chemistry, studies of the crystallization behavior of powders under reducing and oxidizing conditions, deposition of polycrystalline films on silver substrates, deposition of epitaxial films on single-crystal oxide substrates, and deposition on roll textured nickel. The method is illustrated with the example of PrAlO3.

Inorganic-organic Hybrid Materials for Real 3-D Sub-νm Lithography

2003 ◽  
Vol 780 ◽  
Author(s):  
R. Houbertz ◽  
J. Schulz ◽  
L. Fröhlich ◽  
G. Domann ◽  
M. Popall ◽  
...  
Keyword(s):  
Femtosecond Laser ◽  
Sol Gel ◽  
Laser Pulses ◽  
Femtosecond Laser Pulses ◽  
Hybrid Polymer ◽  
Organic Hybrid ◽  
Two Photon ◽  
Applied Technology ◽  
Scale Structures ◽  
Sol Gel Synthesis

AbstractReal 3-D sub-νm lithography was performed with two-photon polymerization (2PP) using inorganic-organic hybrid polymer (ORMOCER®) resins. The hybrid polymers were synthesized by hydrolysis/polycondensation reactions (modified sol-gel synthesis) which allows one to tailor their material properties towards the respective applications, i.e., dielectrics, optics or passivation. Due to their photosensitive organic functionalities, ORMOCER®s can be patterned by conventional photo-lithography as well as by femtosecond laser pulses at 780 nm. This results in polymerized (solid) structures where the non-polymerized parts can be removed by conventional developers.ORMOCER® structures as small as 200 nm or even below were generated by 2PP of the resins using femtosecond laser pulses. It is demonstrated that ORMOCER®s have the potential to be used in components or devices built up by nm-scale structures such as, e.g., photonic crystals. Aspects of the materials in conjunction to the applied technology are discussed.

Sol-Gel Synthesis, Structure and Optical Properties of Nickel-Manganese Ferrites

2019 ◽  
Vol 11 (3) ◽  
pp. 03021-1-03021-5
Author(s):  
V. S. Bushkova ◽  
◽  
I. P. Yaremiy ◽  
B. K. Ostafiychuk ◽  
N. I. Riznychuk ◽  
...  
Keyword(s):  
Optical Properties ◽  
Sol Gel ◽  
Sol Gel Synthesis ◽  
Nickel Manganese

Sol-Gel Synthesis of Nano-Scale, End-Member Albite Feldspar (NaAlSi3O8)

2021 ◽  
Author(s):  
L.M. Anovitz ◽  
A. Affolter ◽  
M.C. Cheshire ◽  
A.J. Rondinone ◽  
Lawrence F. Allard
Keyword(s):  
Sol Gel ◽  
Nano Scale ◽  
Sol Gel Synthesis

scholarly journals Aqueous Sol-Gel Synthesis of Different Iron Ferrites: From 3D to 2D

Materials ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1554
Author(s):  
Justinas Januskevicius ◽  
Zivile Stankeviciute ◽  
Dalis Baltrunas ◽  
Kęstutis Mažeika ◽  
Aldona Beganskiene ◽  
...  
Keyword(s):  
Magnetic Measurements ◽  
Substrate Surface ◽  
Sol Gel ◽  
Synthesis Method ◽  
Xrd Analysis ◽  
Dip Coating ◽  
Yttrium Iron ◽  
Iron Garnet ◽  
Dip Coating Technique ◽  
Sol Gel Synthesis

In this study, an aqueous sol-gel synthesis method and subsequent dip-coating technique were applied for the preparation of yttrium iron garnet (YIG), yttrium iron perovskite (YIP), and terbium iron perovskite (TIP) bulk and thin films. The monophasic highly crystalline different iron ferrite powders have been synthesized using this simple aqueous sol-gel process displaying the suitability of the method. In the next step, the same sol-gel solution was used for the fabrication of coatings on monocrystalline silicon (100) using a dip-coating procedure. This resulted, likely due to substrate surface influence, in all coatings having mixed phases of both garnet and perovskite. Thermogravimetric (TG) analysis of the precursor gels was carried out. All the samples were investigated by X-ray powder diffraction (XRD) analysis. The coatings were also investigated by scanning electron microscopy (SEM), atomic force microscopy (AFM) and Mössbauer spectroscopy. Magnetic measurements were also carried out.

scholarly journals Mesoporous SnO2–SiO2 and Sn–silica–carbon nanocomposites by novel non-hydrolytic templated sol–gel synthesis

RSC Advances ◽  
2016 ◽  
Vol 6 (73) ◽  
pp. 68739-68747 ◽  
Author(s):  
David Skoda ◽  
Ales Styskalik ◽  
Zdenek Moravec ◽  
Petr Bezdicka ◽  
Jiri Bursik ◽  
...  
Keyword(s):  
Sol Gel ◽  
Carbon Nanocomposites ◽  
Sol Gel Synthesis ◽  
Tin Silicate ◽  
Mesoporous Sno2

A novel non-hydrolytic sol–gel (NHSG) synthesis of mesoporous tin silicate xerogels is presented.

Sign in / Sign up

Export Citation Format

Share Document