On the numerical solution of the equations of propagation by the method of characteristics

Meccanica ◽  
1966 ◽  
Vol 1 (1-2) ◽  
pp. 29-36 ◽  
Author(s):  
Giuseppe Evangelisti
Keyword(s):  
Numerical Solution ◽  
Method Of Characteristics ◽  
The Method Of Characteristics

The interaction of a fibre tangle with an airflow

1967 ◽  
Vol 27 (3) ◽  
pp. 561-580 ◽  
Author(s):  
Paul A. Taub
Keyword(s):  
Unsteady Flow ◽  
Numerical Solution ◽  
Analytical Model ◽  
Method Of Characteristics ◽  
Solution Procedure ◽  
Governing Equations ◽  
Stress Strain ◽  
One Dimensional ◽  
The Method Of Characteristics ◽  
Flow Configurations

An analytical model of the interaction of a fibre tangle with an airflow is proposed. This model replaces the discrete fibres by a continuum medium with a non-linear stress-strain law. The governing equations have been examined for one-dimensional unsteady flow configurations and have been found to possess five characteristic directions.A numerical-solution procedure, based upon the method of characteristics, has been outlined and applied to the flow within a dilation chamber. A fibre sample is located at the centre of the chamber, which is alternately pressurized and depressurized.

Numerical solution of the transient gain equations for stimulated backward scattering in absorbing fluids

1976 ◽  
Vol 54 (15) ◽  
pp. 1564-1570 ◽  
Author(s):  
S. S. Rangnekar ◽  
R. H. Enns
Keyword(s):  
Numerical Solution ◽  
Method Of Characteristics ◽  
Interaction Region ◽  
Signal Pulse ◽  
The Method Of Characteristics

The transient gain equations for stimulated backward scattering in absorbing fluids are solved numerically by the method of characteristics for an amplifier setup. In addition to the 'spiking' of the signal pulse previously noted by Maier, Kaiser, and Giordmaine, the existence of a characteristic dip in the amplification of the signal pulse in nonabsorbing fluids when the interaction region ceases to increase is reported. The effect of increasing absorption is to wipe out both the spike and the dip.

Non-symmetric flow in Laval type nozzles

1972 ◽  
Vol 273 (1232) ◽  
pp. 185-235 ◽  
Keyword(s):  
Steady State ◽  
Combustion Chamber ◽  
Method Of Characteristics ◽  
Three Dimensions ◽  
Symmetric Flow ◽  
Gaseous Flow ◽  
The Method Of Characteristics ◽  
Lateral Forces

The equations of the steady state, compressible inviscid gaseous flow are linearized in a form suitable for application to nozzles of the Laval type. The procedure in the supersonic phase is verified by comparing solutions so obtained with those derived by the method of characteristics in two and three dimensions. Likewise, the solutions in the transonic phase are com pared with those obtained by other investigators. The linearized equation is then used to investigate the nat re of non-symmetric flow in rocket nozzles. It is found that if the flow from the combustion chamber into the nozzle is non-symmetric, the magnitude and direction of the turning couple produced by the emergent jet is dependent on the profile of the nozzle and it is possible to design profiles such that the turning couples or lateral forces are zero. The optimum nozzle so designed is independent of the pressure and also of the magnitude of the non-symmetry of the entry flow. The formulae by which they are obtained have been checked by extensive static and projection tests with simulated rocket test vehicles which are described in this paper.

Boundary Layer Closure and Heat Transfer in Constant Base Pressure and Simple Wave Guns

1978 ◽  
Vol 100 (4) ◽  
pp. 690-696 ◽  
Author(s):  
A. D. Anderson ◽  
T. J. Dahm
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Layer Thickness ◽  
Boundary Layer Thickness ◽  
Method Of Characteristics ◽  
Simple Wave ◽  
Momentum Equation ◽  
Base Pressure ◽  
Two Dimensional ◽  
The Method Of Characteristics

Solutions of the two-dimensional, unsteady integral momentum equation are obtained via the method of characteristics for two limiting modes of light gas launcher operation, the “constant base pressure gun” and the “simple wave gun”. Example predictions of boundary layer thickness and heat transfer are presented for a particular 1 in. hydrogen gun operated in each of these modes. Results for the constant base pressure gun are also presented in an approximate, more general form.

scholarly journals Numerical Boundary Conditions for Solar Magnetic Hydrodynamic Flows Using the Method of Characteristics

1996 ◽  
Vol 154 ◽  
pp. 149-153
Author(s):  
S. T. Wu ◽  
A. H. Wang ◽  
W. P. Guo
Keyword(s):  
Boundary Conditions ◽  
Method Of Characteristics ◽  
Numerical Solutions ◽  
The Self ◽  
Time Dependent ◽  
Solar Plasma ◽  
The Method Of Characteristics ◽  
Mhd Simulations ◽  
Self Consistent ◽  
Dynamic Structures

AbstractWe discuss the self-consistent time-dependent numerical boundary conditions on the basis of theory of characteristics for magnetohydrodynamics (MHD) simulations of solar plasma flows. The importance of using self-consistent boundary conditions is demonstrated by using an example of modeling coronal dynamic structures. This example demonstrates that the self-consistent boundary conditions assure the correctness of the numerical solutions. Otherwise, erroneous numerical solutions will appear.

Sign in / Sign up

Export Citation Format

Share Document