Synthesis kinetics of aluminomagnesia spinel by heat treatment in a medium of metallic heat carrier

Refractories ◽  
1982 ◽  
Vol 23 (3-4) ◽  
pp. 203-206
Author(s):  
N. F. Fedorov ◽  
A. P. Gavrilov ◽  
N. I. Ivanov ◽  
N. M. Stepovaya
Keyword(s):  
Heat Treatment ◽  
Heat Carrier ◽  
Aluminomagnesia Spinel ◽  
Kinetics Of

Magnetic Properties, Nanostructure, and Ordering Kinetics of Nb Additive FePtCu Films

2010 ◽  
Vol 638-642 ◽  
pp. 1743-1748
Author(s):  
G.J. Chen ◽  
Y.H. Shih ◽  
Jason S.C. Jang ◽  
S.R. Jian ◽  
P.H. Tsai ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Activation Energy ◽  
Magnetic Properties ◽  
Heating Rates ◽  
Fept Alloy ◽  
Ordering Kinetics ◽  
Nb Content ◽  
Kinetics Of ◽  
Nb Addition ◽  
Microstructure And Magnetic Properties

In this study,the (FePt)94-xCu6Nbx (x=0, 2.87, 4.52, 5.67) alloy films were prepared by co-sputtering. The effects of Nb addition content and heat treatment on the microstructure and magnetic properties of the polycrystalline FePtCu films are reported. Our previous experiments showed that the ordering temperature of the (FePt)94Cu6 films reduced to 320 °C, which is much lower than that of the FePt alloy. However, the grain growth after heat treatment limited the practical application in recording media. By adding the Nb content in the (FePt)94Cu6 film, the grain sizes of the films can be adjusted from 50 to 18nm, even for the films annealed at temperature as high as 600°C. DSC traces of as-deposited disorder films at different heating rates, to evaluate the crystallization of the order phase, revealed that the addition of Nb enhanced the activation energy of ordering from 87 kJ/mol to 288 kJ/mol for the (FePt)94-xCu6Nbx (x=0 and 2.87, respectively) films. The reduction of the grain size and the corresponding increase in the activation energy of the Fe-Pt-Cu-Nb films might result from the precipitation of the Nb atoms around the ordering FePt phase. The (FePt)94-xCu6Nbx (x=2.87) film showed a coercive force of 13.4 kOe and the magnetization of 687 emu/cc.

Kinetics of inactivating human parvovirus B19 and porcine parvovirus by dry-heat treatment

Transfusion ◽  
2008 ◽  
Vol 48 (4) ◽  
pp. 790-790 ◽  
Author(s):  
Johannes Blümel ◽  
Albert Stühler ◽  
Herbert Dichtelmüller
Keyword(s):  
Heat Treatment ◽  
Parvovirus B19 ◽  
Porcine Parvovirus ◽  
Human Parvovirus B19 ◽  
Dry Heat ◽  
Dry Heat Treatment ◽  
Kinetics Of

The Developments and its Applicaton Examples of Computer Simulation Code on Heat Treatment Process

2013 ◽  
Vol 651 ◽  
pp. 589-594
Author(s):  
Dong Ying Ju ◽  
Li Ping Cao
Keyword(s):  
Heat Treatment ◽  
Computer Simulation ◽  
Induction Heat ◽  
Simulation Code ◽  
Induction Heat Treatment ◽  
Coupled Equations ◽  
Field Diffusion ◽  
Material Process ◽  
And Function ◽  
Kinetics Of

Strategy and function of a new developed FEM code COSMAP(COmputer Simulation of MAterial Process) for surface hardening during of thermo-mechanical processing, including heat treatment, carbonizing and nitriding and induction heat treatment, is briefly introduced in this paper. The simulation code is developed based on the metallo-thermo-mechanical theory considering the coupled equations of magnetic or electrical field, diffusion, heat conduction, inelastic stresses and kinetics of phase transformation. Some examples of simulation and the experimental verification for induction heat treatment, carbonized quenching, carbonized- nitrided-quenching process of a cylinder and ring as well as a gear are illustrated, and comparison of the simulated values of distortion, residual stresses and profile of induced phases with the experimental data is made with some discussions.

scholarly journals Germination, Outgrowth, and Vegetative-Growth Kinetics of Dry-Heat-Treated Individual Spores ofBacillusSpecies

2018 ◽  
Vol 84 (7) ◽  
Author(s):  
Lin He ◽  
Zhan Chen ◽  
Shiwei Wang ◽  
Muying Wu ◽  
Peter Setlow ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Spore Germination ◽  
Differential Interference Contrast Microscopy ◽  
Content Type ◽  
Dry Heat ◽  
Heat Treated ◽  
Contrast Microscopy ◽  
Interference Contrast Microscopy ◽  
Dry Heat Treatment ◽  
Kinetics Of

ABSTRACTDNA damage kills dry-heated spores ofBacillus subtilis, but dry-heat-treatment effects on spore germination and outgrowth have not been studied. This is important, since if dry-heat-killed spores germinate and undergo outgrowth, toxic proteins could be synthesized. Here, Raman spectroscopy and differential interference contrast microscopy were used to study germination and outgrowth of individual dry-heat-treatedB. subtilisandBacillus megateriumspores. The major findings in this work were as follows: (i) spores dry-heat-treated at 140°C for 20 min lost nearly all viability but retained their Ca2+-dipicolinic acid (CaDPA) depot; (ii) in most cases, dry-heat treatment increased the average times and variability of all major germination events inB. subtilisspore germination with nutrient germinants or CaDPA, and in one nutrient germination event withB. megateriumspores; (iii)B. subtilisspore germination with dodecylamine, which activates the spore CaDPA release channel, was unaffected by dry-heat treatment; (iv) these results indicate that dry-heat treatment likely damages spore proteins important in nutrient germinant recognition and cortex peptidoglycan hydrolysis, but not CaDPA release itself; and (v) analysis of single spores incubated on nutrient-rich agar showed that while dry-heat-treated spores that are dead can complete germination, they cannot proceed into outgrowth and thus not to vegetative growth. The results of this study provide new information on the effects of dry heat on bacterial spores and indicate that dry-heat sterilization regimens should produce spores that cannot outgrow and thus cannot synthesize potentially dangerous proteins.IMPORTANCEMuch research has shown that high-temperature dry heat is a promising means for the inactivation of spores on medical devices and spacecraft decontamination. Dry heat is known to killBacillus subtilisspores by DNA damage. However, knowledge about the effects of dry-heat treatment on spore germination and outgrowth is limited, especially at the single spore level. In the current work, Raman spectroscopy and differential interference contrast microscopy were used to analyze CaDPA levels in and kinetics of nutrient- and non-nutrient germination of multiple individual dry-heat-treatedB. subtilisandBacillus megateriumspores that were largely dead. The outgrowth and subsequent cell division of these germinated but dead dry-heat-treated spores were also examined. The knowledge obtained in this study will help understand the effects of dry heat on spores both on Earth and in space, and indicates that dry heat can be safely used for sterilization purposes.

scholarly journals Suboptimal Bacillus licheniformis and Bacillus weihenstephanensis Spore Incubation Conditions Increase Heterogeneity of Spore Outgrowth Time

2020 ◽  
Vol 86 (6) ◽  
Author(s):  
C. Trunet ◽  
N. Mtimet ◽  
A.-G. Mathot ◽  
F. Postollec ◽  
I. Leguerinel ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Flow Cytometry ◽  
Bacillus Licheniformis ◽  
Model Parameters ◽  
Vegetative Cells ◽  
Content Type ◽  
Bacillus Weihenstephanensis ◽  
Spore Outgrowth ◽  
Growth Limits ◽  
Kinetics Of

ABSTRACT Changes with time of a population of Bacillus weihenstephanensis KBAB4 and Bacillus licheniformis AD978 dormant spores into germinated spores and vegetative cells were followed by flow cytometry, at pH ranges of 4.7 to 7.4 and temperatures of 10°C to 37°C for B. weihenstephanensis and 18°C to 59°C for B. licheniformis. Incubation conditions lower than optimal temperatures or pH led to lower proportions of dormant spores able to germinate and extended time of germination, a lower proportion of germinated spores able to outgrow, an extension of their times of outgrowth, and an increase of the heterogeneity of spore outgrowth time. A model based on the strain growth limits was proposed to quantify the impact of incubation temperature and pH on the passage through each physiological stage. The heat treatment temperature or time acted independently on spore recovery. Indeed, a treatment at 85°C for 12 min or at 95°C for 2 min did not have the same impact on spore germination and outgrowth kinetics of B. weihenstephanensis despite the fact that they both led to a 10-fold reduction of the population. Moreover, acidic sporulation pH increased the time of outgrowth 1.2-fold and lowered the proportion of spores able to germinate and outgrow 1.4-fold. Interestingly, we showed by proteomic analysis that some proteins involved in germination and outgrowth were detected at a lower abundance in spores produced at pH 5.5 than in those produced at pH 7.0, maybe at the origin of germination and outgrowth behavior of spores produced at suboptimal pH. IMPORTANCE Sporulation and incubation conditions have an impact on the numbers of spores able to recover after exposure to sublethal heat treatment. Using flow cytometry, we were able to follow at a single-cell level the changes in the physiological states of heat-stressed spores of Bacillus spp. and to discriminate between dormant spores, germinated spores, and outgrowing vegetative cells. We developed original mathematical models that describe (i) the changes with time of the proportion of cells in their different states during germination and outgrowth and (ii) the influence of temperature and pH on the kinetics of spore recovery using the growth limits of the tested strains as model parameters. We think that these models better predict spore recovery after a sublethal heat treatment, a common situation in food processing and a concern for food preservation and safety.

scholarly journals Development of Precipitation Hardening Parameters for High Strength Alloy AA 7068

Materials ◽  
2020 ◽  
Vol 13 (4) ◽  
pp. 918
Author(s):  
Julia Osten ◽  
Benjamin Milkereit ◽  
Michael Reich ◽  
Bin Yang ◽  
Armin Springer ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Cooling Rate ◽  
Maximum Yield ◽  
High Strength ◽  
Tensile Tests ◽  
Age Hardening ◽  
Scanning Calorimetry ◽  
Cooling Rates ◽  
Critical Cooling Rate ◽  
Kinetics Of

The mechanical properties after age hardening heat treatment and the kinetics of related phase transformations of high strength AlZnMgCu alloy AA 7068 were investigated. The experimental work includes differential scanning calorimetry (DSC), differential fast scanning calorimetry (DFSC), sophisticated differential dilatometry (DIL), scanning electron microscopy (SEM), as well as hardness and tensile tests. For the kinetic analysis of quench induced precipitation by dilatometry new metrological methods and evaluation procedures were established. Using DSC, dissolution behaviour during heating to solution annealing temperature was investigated. These experiments allowed for identification of the appropriate temperature and duration for the solution heat treatment. Continuous cooling experiments in DSC, DFSC, and DIL determined the kinetics of quench induced precipitation. DSC and DIL revealed several overlapping precipitation reactions. The critical cooling rate for a complete supersaturation of the solid solution has been identified to be 600 to 800 K/s. At slightly subcritical cooling rates quench induced precipitation results in a direct hardening effect resulting in a technological critical cooling rate of about 100 K/s, i.e., the hardness after ageing reaches a saturation level for cooling rates faster than 100 K/s. Maximum yield strength of above 600 MPa and tensile strength of up to 650 MPa were attained.

Sign in / Sign up

Export Citation Format

Share Document