Comparison of the technicoeconomic characteristics of nuclear power stations with modern thermal and fast reactors

1982 ◽  
Vol 53 (6) ◽  
pp. 807-815 ◽  
Author(s):  
A. A. Rineiskii
Keyword(s):  
Nuclear Power ◽  
Fast Reactors ◽  
Power Stations

An evaluation of the equipment tagging process in nuclear power stations

1983 ◽  
Author(s):  
Peter Doyle ◽  
Lothar Schroeder ◽  
Stephen Brewer
Keyword(s):  
Nuclear Power ◽  
Power Stations

Environmental Protection Meets Security of Electricity Supply

2021 ◽  
pp. 1-18
Author(s):  
Ilina Cenevska
Keyword(s):  
Environmental Protection ◽  
Nuclear Power ◽  
Habitats Directive ◽  
Electricity Supply ◽  
The European Union ◽  
Power Stations ◽  
Court Of Justice ◽  
National Energy Policy ◽  
The Relationship ◽  
Practical Implications

Abstract This case comment explores the relationship between two intertwined objectives – ensuring security of electricity supply and environmental protection – in the context of the judgment of the Court of Justice of the European Union in Inter-Environnement Wallonie ASBL and Bond Beter Leefmilieu Vlaanderen ASBL v. Conseil des ministres. The analysis focuses on the application of the Environmental Impact Assessment Directive and the Habitats Directive to the facts of the case, which concerns the extension by a ten-year period of the operation of two Belgian nuclear power stations (Doel 1 and Doel 2) as part of a national energy policy strategy to ensure the security of Belgium's electricity supply. The case comment also considers the legal and practical implications that arise as a result of employing the ‘security of electricity supply’ exemption to enable derogation from the requirements of the aforementioned Directives in circumstances where a Member State considers the security of its electricity supply to be under threat.

Evaluation of the residual stress in stainless steel 304L hydraulically expanded joints

2020 ◽  
pp. 095440892096401
Author(s):  
Ying Hong ◽  
Xuesheng Wang ◽  
Yan Wang ◽  
Zhao Zhang ◽  
Yong Han
Keyword(s):  
Residual Stress ◽  
Stainless Steel ◽  
Yield Strength ◽  
Residual Stresses ◽  
Heat Exchangers ◽  
Nuclear Power ◽  
The Finite Element Method ◽  
Power Stations ◽  
Stainless Steel 304 ◽  
Initial Clearance

Stainless steel 304 L tubes are commonly used in the fabrication of heat exchangers for nuclear power stations. The stress corrosion cracking (SCC) of 304 L tubes in hydraulically expanded tube-to-tubesheet joints is the main reason for the failure of heat exchangers. In this study, 304 L hydraulically expanded joint specimens were prepared and the residual stresses of a tube were evaluated with both an experimental method and the finite element method (FEM). The residual stresses in the outer and inner surfaces of the tube were measured by strain gauges. The expanding and unloading processes of the tube-to-tubesheet joints were simulated by the FEM. Furthermore, an SCC test was carried out to verify the results of the experimental measurement and the FEM. There was good agreement between the FEM and the experimental results. The distribution of the residual stress of the tube in the expanded joint was revealed by the FEM. The effects of the expansion pressure, initial tube-to-hole clearance, and yield strength of the tube on the residual stress in the transition zone that lay between the expanded and unexpanded region of the tube were investigated. The results showed that the residual stress of the expanded joint reached the maximum value when the initial clearance was eliminated. The residual stress level decreased with the decrease of the initial tube-to-hole clearance and yield strength. Finally, an effective method that would reduce the residual stress without losing tightness was proposed.

Construction Aspects of the Doel 1 and 2 SGR Projects

2009 ◽  
Author(s):  
Bert Kroes ◽  
Edmond Gobert ◽  
Xavier Delhaye ◽  
Peter Devolder ◽  
Michel Sonville
Keyword(s):  
Nuclear Power ◽  
Steam Generators ◽  
Primary Coolant ◽  
Worker Exposure ◽  
Power Stations ◽  
Exchange Operation ◽  
Radiation Worker ◽  
Opening And Closing ◽  
Leak Before Break ◽  
Specific Construction

The Doel 1 and 2 PWR Nuclear Power Stations are the oldest commercially operating units in Belgium and the last to replace their two Steam Generators. The Doel 2 Steam Generators were replaced in 2004 and those of Doel 1 will be replaced late 2009. The replacement poses a particular challenge as these are the only stations in Belgium requiring the creation of primary and secondary containment opening for the SG exchange operation. Other construction challenges result from the a-typical SG support configuration which dates from the period well before the more or less standardized support configuration as used for later PWR units. The current paper discusses the construction approaches selected to facilitate the exchange operation and to minimize the outage duration and radiation worker exposure. The main particularities of the construction effort concern the secondary containment opening and closing using a structural formwork assembly, the use of containment platforms hanging inside the primary containment allowing for parallel primary and secondary containment reconstruction and the de-activation of some of the primary coolant piping and SG restraints following the licensing acceptance of the Leak Before Break concept for the primary piping. The specific construction options that made the Doel 2 replacement a success will be presented in this paper.

Sign in / Sign up

Export Citation Format

Share Document