Guniting the lining of steel-smelting furnaces

Metallurgist ◽  
1976 ◽  
Vol 20 (4) ◽  
pp. 261-262
Author(s):  
F. A. Mukhametzyanov ◽  
F. F. Ocheretnyuk ◽  
Yu. I. Balashov
Keyword(s):  
Author(s):  
Volodymyr Bondarenko ◽  
◽  
Oleksandr Filonenko ◽  
Mykhailo Petlovanyi ◽  
Vladyslav Ruskykh ◽  
...  

Purpose. Experimental studies of the interaction of blast-furnace and steel-making slags with open pit waters during their direct contact and assessment of the volume of filling of the formed man-made cavities during mining of mineral deposits. Methods. Based on the analysis, the current low level of metallurgical slag and the lack of real and effective directions of their large-scale utilization were determined. The laboratory studies of the interaction of metallurgical slags with open pit water at a certain time of interaction, generally accepted methods for studying the chemical composition and concentration of substances in water, computer-aided design software packages and drawings to determine the volumes of the open pit mined-out area were used. Results. The dynamics of changes in the products of interactions of steel-smelting slags with open-pit waters at a certain ratio and period of interaction was investigated. It was found that the concentration of pollutants upon contact of water with steel-making slag changes according to polynomial dependences on the time of their interaction, decreasing by the 30th day, which eliminates the danger for the aquifer. The safest type of metallurgical slag was recommended for the formation of the bottom layer of the backfill massif. The volumes of the mined-out area of the open pit were determined in detail to assess the volumes of placement of the backfill material based on metallurgical slags. Scientific novelty. The safety of the contact of backfill materials based on steelmaking slags with open pit water was scientifically proven, which is confirmed by the established polynomial patterns of changes in concentrations and pollutants from the ratio and time of interaction. Practical significance. The formation of the backfill massif on the basis of blast-furnace dump and steel-smelting slags will allow achieving an environmental effect, such as their safe disposal as a reclamation of technologically disturbed lands by mining and restoration of the economic value of the land plot, as well as preventing the formation of new dumps.


2019 ◽  
Vol 2019 (4) ◽  
pp. 203-208
Author(s):  
I Rakhmonov ◽  
◽  
N Niyozov ◽  
K Li

The article presents an analysis of the use of correlation-regression analysis, which is based on the methods of mathematical statistics and probability theory in the study of the power consumption of enterprises with equipment of continuous production. On the basis of the annual power consumption schedule of the electric steel-smelting shop in a monthly time section, mathematical models have been developed for the power consumption parameters. And also, on the basis of statistical data with the use of a mathematical method, mathematical expressions were obtained for the electric power consumption and the specific consumption for the main equipment of the electric steel-smelting shop. In order to assess the adequacy of the developed mathematical models, mathematical models of the total and specific consumption of their power consumption are compared with actual data. The comparison results show high reliability of the power consumption modes of the main equipment of the facility in question. The analysis of the values of forecast errors with low error rates determines the adequacy of the developed mathematical models of the parameters of power consumption in terms of power consumption and specific consumption for the main equipment of the electric steel-smelting shop. In this regard, they can be used to determine the predicted values of the parameters of power consumption in electric steelmaking equipment.


2014 ◽  
Vol 9 (4) ◽  
pp. 634-641 ◽  
Author(s):  
Guangxu Zhu ◽  
Qingjun Guo ◽  
Junxing Yang ◽  
Hanzhi Zhang ◽  
Rongfei Wei ◽  
...  

2020 ◽  
Vol 157 ◽  
pp. 06010
Author(s):  
Dmitry Kuznetsov ◽  
Marina Vysotskaya ◽  
Albert Burgonutdinov

The possibility of using polydisperse steel-smelting slag for the production of type B asphalt concrete is investigated, the possibility of its use as a mineral powder, crushing screening and crushed stone is considered. As a result of the study, it was found that a promising area for the use of slag raw materials in the technology for the preparation of asphalt mixes is: as a mineral powder - without additional processing steps; crushing screening - with the development of additional technological operations. The use of raw materials as crushed stone is impractical because of the high average density of the final asphalt mixture. Based on the test results, the characteristics of the fatigue properties of asphalt concrete from fine-grained dense mixtures of type B made on mineral powders from slag and limestone were obtained. It was established that at the initial moment, a large number of cycles to failure are characterized by compositions on slag powder, however, samples from this series tested after 45 days showed a significant rigidity increase and were destroyed earlier than similar samples on limestone. Obviously, this phenomenon is associated with an increase in the brittle properties of the material due to the formation of crystallization-condensation bonds in the structure of asphalt concrete containing slag.


2013 ◽  
Vol 43 (2) ◽  
pp. 106-109 ◽  
Author(s):  
M. V. Zuev ◽  
S. P. Burmasov ◽  
A. I. Stepanov ◽  
A. G. Gudov ◽  
A. V. Murzin ◽  
...  
Keyword(s):  

1920 ◽  
Vol 1 (1supp) ◽  
pp. 66-68
Author(s):  
Victor Stobie

2012 ◽  
Vol 581-582 ◽  
pp. 899-903
Author(s):  
Long Kui Jiang

Based on feature of low-sulphur steel smelting in PanGang, in terms of optimizing desulfurization technology, reducing resulfurization in converter steelmaking, optimizing desulfurization in LF molten steel refining process and developing RH molten steel refining desulfurization technology. The sulphur content of hot metal can be controlled no more than 0.003%, and that of terminal molten steel can also be controlled no more than 0.005%, which makes the production of low-sulphur steel come true, and the technology route of such steel smelting be established.


Sign in / Sign up

Export Citation Format

Share Document