Homolytic addition of dichlorodibromomethane to acrylonitrile and methyl acrylate

1978 ◽  
Vol 27 (8) ◽  
pp. 1635-1638
Author(s):  
F. K. Velichko ◽  
L. V. Vinogradova
Keyword(s):  
Methyl Acrylate ◽  
Homolytic Addition

Homolytic addition of dichloromalonic ester to methyl acrylate

1977 ◽  
Vol 26 (6) ◽  
pp. 1342-1342
Author(s):  
F. K. Velichko ◽  
R. A. Amriev ◽  
R. Kh. Friedlina
Keyword(s):  
Methyl Acrylate ◽  
Homolytic Addition

ChemInform Abstract: HOMOLYTIC ADDITION OF DIETHYL DICHLOROMALONATE TO METHYL ACRYLATE

1977 ◽  
Vol 8 (45) ◽  
pp. no-no
Author(s):  
F. N. VELICHKO ◽  
R. A. AMRIEV ◽  
R. KH. FREIDLINA
Keyword(s):  
Methyl Acrylate ◽  
Homolytic Addition

Biomedical Materials to Repair Retinal Detachments

1985 ◽  
Vol 55 ◽  
Author(s):  
Miguel F. Refojo
Keyword(s):  
Retinal Detachment ◽  
Silicone Rubber ◽  
Methyl Acrylate ◽  
Silicone Oil ◽  
Vitreous Body ◽  
Light Sensitivity ◽  
Scleral Buckling ◽  
Intraocular Injection ◽  
Other Substances

ABSTRACTImplants are essential for the repair of retinal detachments. The implant buckles the wall of the eye and apposes the detached retina with the choroid, thus restoring light sensitivity to the retina. The scleral buckling also relieves traction on the retina from a shrinking vitreous body. The implant materials most commonly used are solid silicone rubber and silicone sponges, but both types have some disadvantages. A poly(hydroxyethyl acrylate-co-methyl acrylate) hydrogel implant with improved properties of softness and antibiotic absorption is also available for retinal detachment surgery. Proliferative vitreoretinopathy involves various conditions of retinal detachment complicated by vitreous fibrosis, which, after vitrectomy, may be treated with intraocular injection of fluids that support the retina against the choroid. For conditions requiring a long-term implant, silicone oil although controversial is the material of choice. Many other substances have been investigated but none better has yet been found.

Comparison of the viscoelastic penetration and tensile behaviour of poly(methyl acrylate) and poly(ethyl acrylate)

1979 ◽  
Vol 44 (6) ◽  
pp. 1942-1948 ◽  
Author(s):  
Jaroslav Hrouz ◽  
Michal Ilavský ◽  
Ivan Havlíček ◽  
Karel Dušek
Keyword(s):  
Methyl Acrylate ◽  
Poisson Ratio ◽  
Young Modulus ◽  
Ethyl Acrylate ◽  
Sample Volume ◽  
Viscoelastic Behaviour ◽  
Tensile Behaviour ◽  
Temperature Superposition ◽  
Main Transition

The viscoelastic penetration and tensile behaviour of poly(methyl acrylate) and poly(ethyl acrylate) in the main transition region have been investigated. It was found that the time-temperature superposition could be carried out in the case of the penetration viscoelastic behaviour; the temperature dependence of the penetration and tensile shift factors was the same. The superimposed curves of the penetration and Young modulus allowed us to calculate the dependence of the Poisson ratio and thus to characterize the change in sample volume with deformation. It was demonstrated that the penetration method of determination of the viscoelastic behaviour is equivalent to the tensile method.

scholarly journals Fabrication and Characterization of Electrospun Poly(acrylonitrile-co-Methyl Acrylate)/Lignin Nanofibers: Effects of Lignin Type and Total Polymer Concentration

Polymers ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 992
Author(s):  
Suchitha Devadas ◽  
Saja M. Nabat Al-Ajrash ◽  
Donald A. Klosterman ◽  
Kenya M. Crosson ◽  
Garry S. Crosson ◽  
...  
Keyword(s):  
Methyl Acrylate ◽  
Lignin Content ◽  
Polymer Concentration ◽  
Weight Ratio ◽  
Electrospun Nanofibers ◽  
Polymer Content ◽  
Blend Ratio ◽  
Blend Ratios ◽  
Poly Acrylonitrile

Lignin macromolecules are potential precursor materials for producing electrospun nanofibers for composite applications. However, little is known about the effect of lignin type and blend ratios with synthetic polymers. This study analyzed blends of poly(acrylonitrile-co-methyl acrylate) (PAN-MA) with two types of commercially available lignin, low sulfonate (LSL) and alkali, kraft lignin (AL), in DMF solvent. The electrospinning and polymer blend solution conditions were optimized to produce thermally stable, smooth lignin-based nanofibers with total polymer content of up to 20 wt % in solution and a 50/50 blend weight ratio. Microscopy studies revealed that AL blends possess good solubility, miscibility, and dispersibility compared to LSL blends. Despite the lignin content or type, rheological studies demonstrated that PAN-MA concentration in solution dictated the blend’s viscosity. Smooth electrospun nanofibers were fabricated using AL depending upon the total polymer content and blend ratio. AL’s addition to PAN-MA did not affect the glass transition or degradation temperatures of the nanofibers compared to neat PAN-MA. We confirmed the presence of each lignin type within PAN-MA nanofibers through infrared spectroscopy. PAN-MA/AL nanofibers possessed similar morphological and thermal properties as PAN-MA; thus, these lignin-based nanofibers can replace PAN in future applications, including production of carbon fibers and supercapacitors.

Sign in / Sign up

Export Citation Format

Share Document