Nondestructive thermophysical-parameter monitoring for various equipment states

1989 ◽  
Vol 57 (1) ◽  
pp. 777-783
Author(s):  
S. V. Mishchenko ◽  
A. A. Churikov
Electronics ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 441
Author(s):  
Marcello Cioni ◽  
Alessandro Bertacchini ◽  
Alessandro Mucci ◽  
Nicolò Zagni ◽  
Giovanni Verzellesi ◽  
...  

In this paper, we investigate the evolution of threshold voltage (VTH) and on-resistance (RON) drifts in the silicon carbide (SiC) power metal-oxide-semiconductor field-effect transistors (MOSFETs) during the switch-mode operation. A novel measurement setup for performing the required on-the-fly characterization is presented and the experimental results, obtained on commercially available TO-247 packaged SiC devices, are reported. Measurements were performed for 1000 s, during which negative VTH shifts (i.e., VTH decrease) and negative RON drifts (i.e., RON decrease) were observed. To better understand the origin of these parameter drifts and their possible correlation, measurements were performed for different (i) gate-driving voltage (VGH) and (ii) off-state drain voltage (VPH). We found that VTH reduction leads to a current increase, thus yielding RON to decrease. This correlation was explained by the RON dependence on the overdrive voltage (VGS–VTH). We also found that gate-related effects dominate the parameter drifts at low VPH with no observable recovery, due to the repeated switching of the gate signal required for the parameter monitoring. Conversely, the drain-induced instabilities caused by high VPH are completely recoverable within 1000 s from the VPH removal. These results show that the measurement setup is able to discern the gate/drain contributions, clarifying the origin of the observed VTH and RON drifts.


Author(s):  
R. Rajeshwari ◽  
V. S. V. Sri ◽  
G. Subhalakshmi ◽  
P. M. Yogalakshmi
Keyword(s):  

2015 ◽  
Vol 719-720 ◽  
pp. 561-566
Author(s):  
Yong Qing Gao ◽  
Dan Shanng

Firstly, this paper analyzes the significance and demand of intelligent power. Then a solution of home intelligent power system based on ZigBee is proposed. Hardware components of the solution proposed in this work mainly consists of AT91SAM9G20 as the core of the home gateway controller, CC430F6137 as the core of the network node of intelligent power and construction of intelligent home network system. This paper mainly introduces a new type of home intelligent power consumption network node, which realizes the measurement of electric power parameter, monitoring, overload protection and timing control, the communication between home gateway and network node through ZigBee protocol, the intelligent household electricity. By testing and using, it can meet the aspects of everyday life needs of user in convenient life, intelligent life and energy-saving, etc. It brings great commercial return and technical value to the development and application of intelligent home in future, as well as far-reaching impact to improving the quality of intelligent home services.


Sign in / Sign up

Export Citation Format

Share Document