Air cooling of a turbine guide vane for a stationary gas-turbine plant (GTP) with a high gas pressure

1978 ◽  
Vol 34 (5) ◽  
pp. 615-619
Author(s):  
L. L. Volodkin
Keyword(s):  
Gas Turbine ◽  
Guide Vane ◽  
Gas Pressure ◽  
Air Cooling ◽  
Turbine Plant ◽  
Turbine Guide Vane ◽  
Gas Turbine Plant

Thermodynamic Analysis of Air-Cooled Gas Turbine Plants

2000 ◽  
Vol 123 (2) ◽  
pp. 265-270 ◽  
Author(s):  
E. A. Khodak ◽  
G. A. Romakhova
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Direct Determination ◽  
Thermodynamic System ◽  
Flow Diagram ◽  
Air Cooling ◽  
Open Steam ◽  
Turbine Plant ◽  
Turbine Cooling ◽  
Gas Turbine Plant

At present high temperature, internally cooled gas turbines form the basis for the development of highly efficient plants for utility and industrial markets. Minimizing irreversibility of processes in all components of a gas turbine plant leads to greater plant efficiency. Turbine cooling, like all real processes, is an irreversible process and results in lost opportunity for producing work. Traditional tools based on the first and second laws of thermodynamics enable performance parameters of a plant to be evaluated, but they give no way of separating the losses due to cooling from the overall losses. This limitation arises from the fact that the two processes, expansion and cooling, go on simultaneously in the turbine. Part of the cooling losses are conventionally attributed to the turbine losses. This study was intended for the direct determination of lost work due to cooling. To this end, a cooled gas turbine plant has been treated as a work-producing thermodynamic system consisting of two systems that exchange heat with one another. The concepts of availability and exergy have been used in the analysis of such a system. The proposed approach is applicable to gas turbines with various types of cooling: open-air, closed-steam, and open-steam cooling. The open-air cooling technology has found the most wide application in current gas turbines. Using this type of cooling as an example, the potential of the developed method is shown. Losses and destructions of exergy in the conversion of the fuel exergy into work are illustrated by the exergy flow diagram.

A Thermo-Environmental Evaluation of a Modified Combustion Gas Turbine Plant

2018 ◽  
Vol 141 (4) ◽  
Author(s):  
Abdul Khaliq ◽  
M. A. Habib ◽  
Keshavendra Choudhary
Keyword(s):  
Relative Humidity ◽  
Gas Turbine ◽  
Air Cooling ◽  
Moderate Increase ◽  
Turbine Plant ◽  
Combustion Gas ◽  
Ambient Relative Humidity ◽  
Co Concentration ◽  
Gas Turbine Plant ◽  
Gas Turbine Cycle

This paper reports the comprehensive thermodynamic modeling of a modified combustion gas turbine plant where Brayton refrigeration cycle was employed for inlet air cooling along with evaporative after cooling. Exergetic evaluation was combined with the emission computation to ascertain the effects of operating variables like extraction pressure ratio, extracted mass rate, turbine inlet temperature (TIT), ambient relative humidity, and mass of injected water on the thermo-environmental performance of the gas turbine cycle. Investigation of the proposed gas turbine cycle revealed an exergetic output of 33%, compared to 29% for base case. Proposed modification in basic gas turbine shows a drastic reduction in cycle's exergy loss from 24% to 3% with a considerable decrease in the percentage of local irreversibility of the compressor from 5% to 3% along with a rise in combustion irreversibility from 19% to 21%. The environmental advantage of adding evaporative after cooling to gas turbine cycle along with inlet air cooling can be seen from the significant reduction of NOx from 40 g/kg of fuel to 1 × 10−9 g/kg of fuel with the moderate increase of CO concentration from 36 g/kg of fuel to 99 g/kg of fuel when the fuel–air equivalence ratio reduces from 1.0 to 0.3. Emission assessment further reveals that the increase in ambient relative humidity from 20% to 80% causes a considerable reduction in NOx concentration from 9.5 to 5.8 g/kg of fuel while showing a negligible raise in CO concentration from 4.4 to 5.0 g/kg of fuel.

Thermo-Economic Analysis of Inlet Air Conditioning Methods of a Cogeneration Gas Turbine Plant

2002 ◽  
Author(s):  
M. Nixdorf ◽  
A. Prelipceanu ◽  
D. Hein
Keyword(s):  
Gas Turbine ◽  
Air Conditioning ◽  
Thermal Power ◽  
Evaporative Cooling ◽  
Ambient Air ◽  
Air Cooling ◽  
Ambient Conditions ◽  
Reference Case ◽  
Turbine Plant ◽  
Gas Turbine Plant

The purpose of this work is to investigate the benefits of some different ambient air conditioning methods for reducing the gas turbine intake air temperature in order to enhance the gas turbine power. As a reference case the combined heat and power plant of the campus area of the Technische Universita¨t Mu¨nchen in Garching is considered, which is equipped with an Allison KH501 Cheng Cycle gas turbine. Three novel technical possibilities of ambient air cooling and power augmentation are shown in detail (desiccant dehumidification and evaporative cooling, absorption chiller unit with air cooler, evaporative cooling at increased inlet air pressure). Based on site ambient conditions and measured yearly load lines for heat and electrical power connected with actual cost functions, the potential economic savings are worked out for the different technical modifications using ambient air cooling for power augmentation of the gas turbine plant. The economic operation lines for power and heat, supplied by the modified gas turbine plant, are calculated by a cost optimization system. The results are compared based on investment costs and economic savings by the extended annual electrical and thermal power production of the modified gas turbine plant.

scholarly journals Natural gas intracyclic attachment for energy generating unit based on gas turbine plant

2019 ◽  
Vol 114 ◽  
pp. 06004
Author(s):  
Dmitriy Kalashnikov ◽  
Yuriy Borisov ◽  
Elizaveta Kalashnikova
Keyword(s):  
Gas Turbine ◽  
Heat Supply ◽  
Heat Supply System ◽  
Gas Pressure ◽  
Hot Water ◽  
Power Engineering ◽  
Fuel Gas ◽  
Turbine Plant ◽  
Advantages And Disadvantages ◽  
Gas Turbine Plant

In this article, problems of effectiveness increasing in complex power supply are considered. Disadvantages of centralized power engineering and advantages of power engineering capabilities organization in immediate consumer proximity are presented. Consumer needs satisfaction in electricity, heat supply and cold supply are offered to be realized by conversion of district and quarter boiler houses to trigeneration stations, which are based on gas turbine plants units. In this research, solutions of problem related to lack of fuel gas pressure for gas turbine engine power, which is included in gas turbine plant of trigeneration stations, are suggested. As a result, after considering possible variants of fuel gas pressure increasing, it was decided that there is a perspective of using fuel gas intracyclic compression attachment. Its operating principle involves organization of main steam extraction in heat cycle for booster compressor drive, which compresses fuel gas before its transfer to combustor of gas turbine plant. Results of gas compressor and drive steam turbine design are presented. These parts are included in fuel gas intracyclic compression attachment in specific unit of gas turbine plant. Also, general recommendations about new compressor and turbine stages design for any other units of gas turbine plant are pointed. Further, in the article, two variants of thermal circuit, based on gas turbine plant, are suggested. The first one is a circuit with hot water boiler, where exhaust gas recuperation after turbine is carried out for producing steam, related to fuel gas intracyclic compression attachment demands, and heat system water heating for consumer heat supply system. The second variant involves development of typical gas turbine plant unit in power station with exhaust boiler. There fuel gas intracyclic compression attachment is activated by steam work after exhaust boiler. Then, variants of diagram are compared between each other. Also advantages and disadvantages each of them are considered.

Sign in / Sign up

Export Citation Format

Share Document