Effect of ??-phase content on preparation schedule for structure and superplasticity of high-temperature nickel alloys

1989 ◽  
Vol 31 (7) ◽  
pp. 526-532
Author(s):  
O. A. Kaibyshev ◽  
F. Z. Utyashev ◽  
V. A. Valitov
Keyword(s):  
High Temperature ◽  
Nickel Alloys ◽  
Phase Content

Influence of Thermo-Mechanical Processing on the Microstructure of Beryllia Dispersed Nickel Alloys

1973 ◽  
Vol 31 ◽  
pp. 184-185
Author(s):  
M.S. Grewal ◽  
S.A. Sastri ◽  
N.J. Grant
Keyword(s):  
High Temperature ◽  
Nickel Alloys ◽  
Thermomechanical Processing ◽  
Cold Work ◽  
High Temperature Strength ◽  
Strengthening Effect ◽  
Mechanical Processing ◽  
Uniform Dispersion ◽  
Oxide Particles ◽  
Nickel Base

Currently there is a great interest in developing nickel base alloys with fine and uniform dispersion of stable oxide particles, for high temperature applications. It is well known that the high temperature strength and stability of an oxide dispersed alloy can be greatly improved by appropriate thermomechanical processing, but the mechanism of this strengthening effect is not well understood. This investigation was undertaken to study the dislocation substructures formed in beryllia dispersed nickel alloys as a function of cold work both with and without intermediate anneals. Two alloys, one Ni-lv/oBeo and other Ni-4.5Mo-30Co-2v/oBeo were investigated. The influence of the substructures produced by Thermo-Mechanical Processing (TMP) on the high temperature creep properties of these alloys was also evaluated.

A NEW WELDING MATERIAL FOR REGENERATION IN THE WELDING TECHNOLOGY BASED ON NICKEL. ANALYSIS OF THE COMPOSITION AND PROPERTIES OF DEFORMABLE HEAT-RESISTANT HIGH-CHROMIUM NICKEL-BASED ALLOYS FOR WELDED PARTS. ANALYSIS OF EXISTING FUELLING STATIONS TYPES AND VEHICLES USING HYDROGEN, HYDROGEN PRODUCTION AND STORING METHODS

2019 ◽  
pp. 43-48
Author(s):  
Ben Nengjun ◽  
Zhou Pengfei ◽  
Oleksandr Labartkava ◽  
Mykhailo Samokhin
Keyword(s):  
Rare Earth ◽  
High Temperature ◽  
Nickel Alloys ◽  
Total Content ◽  
Operating Conditions ◽  
High Temperature Strength ◽  
High Chromium ◽  
Salt Corrosion ◽  
Tcp Phases ◽  
The Impact

This work involves an analysis of high-chromium high-temperature deformable wieldable nickel alloys for use in GTE repair assemblies. It is shown that the alloys EP868 (VZh98) and Haynes 230 can be used in welded assemblies with an operating temperature of 800-1100 °C. The alloys Nimonic 81, Nimonic 91, IN 935, IN 939, and Nicrotan 2100 GT also have a high potential for use in welded assemblies. They are characterized by a combination of good weldability, high-temperature strength, and resistance to scaling. There have been conducted studies on high-temperature salt corrosion of model nickel alloys. They allowed establishing the patterns of the impact of base metal alloying with chromium, aluminum, titanium, cobalt, tungsten, molybdenum, niobium, tantalum and rare earth metals on the critical temperature of the start of salt corrosion Tcor and the alloy mass loss. It has been established that alloys with a moderate concentration (13-16%) of chromium can possess satisfactory hightemperature corrosion resistance (HTC resistance) under the operating conditions of ship GTE. The HTC resistance of CrAl-Ti alloys improves upon reaching the ratio Ti/Al ˃ 1. Meanwhile, the ratio Ti/Al ˂ 1 promotes the formation of corrosion products with low protective properties. The positive effect of tantalum on the HTC resistance of alloys is manifested at higher test temperatures than that of titanium, and the total content of molybdenum and tungsten in alloys is limited by the condition 8Mo2 – 2W2 = 89. The presence of refractory elements stabilizes the strengthening phase and prevents formation of the ɳ-phase. However, their excess promotes formation of the embrittling topologically close packed (TCP) phases and boundary carbides of an unfavorable morphology. Based on the studies of the HTC resistance, there has been identified a class of model high-temperature corrosionresistant nickel alloys with a moderate or high chromium content (30%), Ti/Al ˃ 1, and a balanced content of refractory and rare-earth elements.

A Study of Coatings on High-Temperature Nickel Alloys by the Potentiodynamic Method

2005 ◽  
Vol 47 (5-6) ◽  
pp. 239-243
Author(s):  
Yu. A. Puchkov ◽  
V. A. Poklad ◽  
Yu. P. Shkretov
Keyword(s):  
High Temperature ◽  
Nickel Alloys ◽  
Potentiodynamic Method

Microstructure Evolution of near α Titanium Alloy during Multi-Step Thermomechanical Deformation Process

2021 ◽  
Vol 1035 ◽  
pp. 305-311
Author(s):  
Qing Shan Liu ◽  
Bo Long Li ◽  
Tong Bo Wang ◽  
Cong Cong Wang ◽  
Peng Qi ◽  
...  
Keyword(s):  
Titanium Alloy ◽  
High Temperature ◽  
Hot Deformation ◽  
Deformation Temperature ◽  
Strain Curve ◽  
Optical Microscope ◽  
Phase Content ◽  
Β Phase ◽  
Α Phase ◽  
Gleeble 3500

A new type of near α high temperature titanium alloy of Ti-Al-Sn-Zr-Mo-Si-Er was studied. The samples with different primary α phase content were prepared by solid solution at 950 °C/1 h—1010 °C/1 h. The multi-step hot compression experiments were carried out by Gleeble-3500 in a sequence of upper region of α + β phase, then followed by lower region of α + β phase. The effects of primary α phase content and deformation temperature on the microstructure of the alloy were studied by means of true stress-strain curve and optical microscope. The results show that the content of primary α phase gradually decreases from 45.4% at 950°C to 0% at 1010°C. As the deformation temperature decreases from 940°C to 900°C, the content of α phase increases gradually from 65% to 94%, which is changed from dynamic recrystallization to deformed structure elongated along RD direction. It is found that the arrangement of α phase along RD direction is the longest at 920°C. With the increase of the deformation temperature in the multi-step high temperature region from 970°C to 990°C, the width of deformed α phase decreases from 3.64 μm at 970°C to 2.71 μm at 990°C. The optimized microstructure is composed of 20% primary α phase arranged along RD direction. This process has a certain potential in the process of hot deformation of the alloy. Key words: high temperature titanium alloy, primary α phase, multi-step hot deformation

High Temperature Oxidation Of Iron-Nickel Alloys

CORROSION ◽  
1958 ◽  
Vol 14 (4) ◽  
pp. 33-36 ◽  
Author(s):  
M. J. BRABERS ◽  
C. E. BIRCHEN ALL
Keyword(s):  
High Temperature ◽  
Nickel Alloys ◽  
High Temperature Oxidation ◽  
Temperature Oxidation ◽  
Iron Nickel ◽  
Iron Nickel Alloys
Sign in / Sign up

Export Citation Format

Share Document