Microchemical heterogeneity and some structural characteristics of a nickel-chromium alloy

1980 ◽  
Vol 19 (3) ◽  
pp. 208-210
Author(s):  
V. V. Levitin ◽  
E. N. Stoyanova ◽  
L. P. Kurnavina ◽  
M. R. Orlov
Keyword(s):  
Structural Characteristics ◽  
Chromium Alloy ◽  
Nickel Chromium

INCONEL ALLOY X-750

Alloy Digest ◽  
1966 ◽  
Vol 15 (7) ◽  
Keyword(s):  
Gas Turbines ◽  
Rupture Strength ◽  
Low Cost ◽  
High Strength ◽  
Heat Treating ◽  
Chromium Alloy ◽  
Cryogenic Temperatures ◽  
Inconel Alloy ◽  
Nickel Chromium ◽  
Corrosion And Oxidation

Abstract INCONEL alloy X-750 is an age-hardenable, nickel-chromium alloy used for its corrosion and oxidation resistance and high creep rupture strength at temperature up to 1500 F. It also has excellent properties at cryogenic temperatures. It was originally developed for use in gas turbines, but because of its low cost, high strength and weldability it has become the standards choice for a wide variety of applications. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep and fatigue. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-115. Producer or source: Huntington Alloy Products Division, An INCO Company.

INCONEL ALLOY 671

Alloy Digest ◽  
1972 ◽  
Vol 21 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Heat Treating ◽  
High Temperature Corrosion ◽  
Chromium Alloy ◽  
Inconel Alloy ◽  
Nickel Chromium ◽  
Temperature Performance

Abstract INCONEL ALLOY 671 is a nickel-chromium alloy having excellent resistance to high-temperature corrosion. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-180. Producer or source: Huntington Alloy Products Division, An INCO Company.

SANICRO 31

Alloy Digest ◽  
1965 ◽  
Vol 14 (9) ◽  
Keyword(s):  
Mechanical Properties ◽  
Petrochemical Industry ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Chromium Alloy ◽  
Good Resistance ◽  
Nickel Chromium ◽  
Temperature Performance ◽  
Iron Nickel ◽  
Corrosion And Oxidation

Abstract SANDVIK SANICRO 31 is an iron-nickel-chromium alloy having good resistance to corrosion and oxidation and good mechanical properties at elevated temperatures. It is recommended for electrical sheathing, pyrometer tubes, equipment for heat treating and furnace tubes and other equipment in the petrochemical industry. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-172. Producer or source: Sandvik.

Tantalum and niobium coatings on nickel - chromium alloy

1973 ◽  
Vol 15 (11) ◽  
pp. 978-980
Author(s):  
Yu. M. Lakhtin ◽  
Ya. D. Kogan ◽  
V. A. Borodin
Keyword(s):  
Chromium Alloy ◽  
Nickel Chromium

Vacuum-deposited films of nickel-chromium alloy

1957 ◽  
Vol 8 (5) ◽  
pp. 205-210 ◽  
Author(s):  
R H Alderson ◽  
F Ashworth
Keyword(s):  
Chromium Alloy ◽  
Nickel Chromium ◽  
Deposited Films

scholarly journals Load-Application Devices: A Comparative Strain Gauge Analysis

2015 ◽  
Vol 26 (3) ◽  
pp. 258-262 ◽  
Author(s):  
Renato Sussumu Nishioka ◽  
Luis Gustavo Oliveira de Vasconcellos ◽  
Renata Pilli Jóias ◽  
Sigmar de Mello Rode
Keyword(s):  
Strain Gauge ◽  
Repeated Measures ◽  
Testing Machine ◽  
Acrylic Resin ◽  
Load Application ◽  
Chromium Alloy ◽  
Axial Loads ◽  
Nickel Chromium ◽  
Universal Testing ◽  
Significant Difference

In view of the low loading values commonly employed in dentistry, a load-application device (LAD) was developed as option to the universal testing machine (UTM), using strain gauge analysis. The aim of this study was to develop a load-application device (LAD) and compare the LAD with the UTM apparatus under axial and non-axial loads. An external hexagonal implant was inserted into a polyurethane block and one EsthetiCone abutment was connected to the implant. A plastic prosthetic cylinder was screwed onto the abutment and a conical pattern crown was fabricated using acrylic resin. An impression was made and ten identical standard acrylic resin patterns were obtained from the crown impression, which were cast in nickel-chromium alloy (n=10). Four strain gauges were bonded diametrically around the implant. The specimens were subjected to central (C) and lateral (L) axial loads of 30 kgf, on both devices: G1: LAD/C; G2: LAD/L; G3: UTM/C; G4: UTM/L. The data (με) were statistically analyzed by repeated measures ANOVA and Tukey's test (p<0.05). No statistically significant difference was found between the UTM and LAD devices, regardless of the type of load. It was concluded that the LAD is a reliable alternative, which induces microstrains to implants similar to those obtained with the UTM.

scholarly journals Effect of recasting on the elastic modulus of metal-ceramic systems from nickel-chromium and cobalt-chromium alloys

2007 ◽  
Vol 64 (7) ◽  
pp. 469-473 ◽  
Author(s):  
Nemanja Mirkovic
Keyword(s):  
Elastic Modulus ◽  
Testing Machine ◽  
Fracture Load ◽  
Bending Test ◽  
Chromium Alloy ◽  
Cobalt Chromium ◽  
Nickel Chromium ◽  
Ceramic Samples ◽  
Chromium Alloys ◽  
Metal Ceramic

Background/Aim. Elastic modulus of metal-ceramic systems determines their flexural strength and prevents damages on ceramics during mastication. Recycling of basic alloys is often a clinical practice, despite the possible effects on the quality of the future metal-ceramic dentures. This research was done to establish recasting effects of nickel-chromium and cobalt-chromium alloys on the elastic modulus of metalceramic systems in making fixed partial dentures. Methods. The research was performed as an experimental study. Six metal-ceramic samples of nickel-chromium alloy (Wiron 99) and cobalt-chromium alloy (Wirobond C) were made. Alloy residues were recycled through twelve casting generations with the addition of 50% of new alloy on the occasion of every recasting. Three- point bending test was used to determine elastic modulus, recommended by the standard ISO 9693:1999. Fracture load for damaging ceramic layer was recorded on the universal testing machine (Zwick, type 1464), with the speed of 0,05 mm/min. Results. The results of this research revealed significant differences between elasticity modules of metal-ceramic samples in every examined recycle generation. Recasting had negative effect on the elastic modulus of the examined alloys. This research showed the slight linear reduction of elastic modulus up to the 6th generation of recycling. After the 6th recycling there was a sudden fall of elastic modulus. Conclusion. Recasting of nickelchromium and cobalt-chromium alloys is not recommended because of the reduced elastic modulus of these alloys. Instead of reusing previously recasted alloys, the alloy residues should be returned to the manufacturer. .

Surface phenomena in a precipitation-hardenable nickel–chromium alloy during multiple heating/cooling

2015 ◽  
Vol 591 ◽  
pp. 311-315 ◽  
Author(s):  
Stanislaw Adamiak ◽  
Nicolas Berchenko ◽  
Wojciech Bochnowski ◽  
Andrzej Dziedzic ◽  
Malgorzata Trzyna ◽  
...  
Keyword(s):  
Chromium Alloy ◽  
Surface Phenomena ◽  
Nickel Chromium
Sign in / Sign up

Export Citation Format

Share Document