Joint effects of various flow mechanisms in a porous polycrystalline body in hot pressing. Part 1. General theory

1991 ◽  
Vol 30 (7) ◽  
pp. 562-566
Author(s):  
M. S. Koval'chenko
Keyword(s):  
General Theory ◽  
Hot Pressing ◽  
Joint Effects ◽  
Porous Polycrystalline ◽  
Flow Mechanisms ◽  
Polycrystalline Body

Extreme self-sacrifice beyond fusion: Moral expansiveness and the special case of allyship

2018 ◽  
Vol 41 ◽  
Author(s):  
Daniel Crimston ◽  
Matthew J. Hornsey
Keyword(s):  
General Theory ◽  
Biological Markers ◽  
Natural Environment ◽  
Relevant Dimension ◽  
Special Case

AbstractAs a general theory of extreme self-sacrifice, Whitehouse's article misses one relevant dimension: people's willingness to fight and die in support of entities not bound by biological markers or ancestral kinship (allyship). We discuss research on moral expansiveness, which highlights individuals’ capacity to self-sacrifice for targets that lie outside traditional in-group markers, including racial out-groups, animals, and the natural environment.

Microstructural Evolution in Reduced TiO2

1981 ◽  
Vol 39 ◽  
pp. 74-75
Author(s):  
W. T. Donlon ◽  
S. Shinozaki ◽  
E. M. Logothetis ◽  
W. Kaizer
Keyword(s):  
Microstructural Evolution ◽  
Point Defects ◽  
Extended Defects ◽  
Small Deviations ◽  
Controlled Atmospheres ◽  
Limited Solubility ◽  
Thin Foils ◽  
Heat Treated ◽  
Porous Polycrystalline ◽  
Crystallographic Shear

Since point defects have a limited solubility in the rutile (TiO2) lattice, small deviations from stoichiometry are known to produce crystallographic shear (CS) planes which accomodate local variations in composition. The material used in this study was porous polycrystalline TiO2 (60% dense), in the form of 3mm. diameter disks, 1mm thick. Samples were mechanically polished, ion-milled by conventional techniques, and initially examined with the use of a Siemens EM102. The electron transparent thin foils were then heat-treated under controlled atmospheres of CO/CO2 and H2 and reexamined in the same manner.The “as-received” material contained mostly TiO2 grains (∼5μm diameter) which had no extended defects. Several grains however, aid exhibit a structure similar to micro-twinned grains observed in reduced rutile. Lattice fringe images (Fig. 1) of these grains reveal that the adjoining layers are not simply twin related variants of a single TinO2n-1 compound. Rather these layers (100 - 250 Å wide) are alternately comprised of stoichiometric TiO2 (rutile) and reduced TiO2 in the form of Ti8O15, with the Ti8O15 layers on either side of the TiO2 being twin related.

Microstructure of mechanically alloyed and hot-pressed Al5CuZr2

1990 ◽  
Vol 48 (4) ◽  
pp. 970-971
Author(s):  
T. E. Mitchell ◽  
P. B. Desch ◽  
R. B. Schwarz
Keyword(s):  
Mechanical Alloying ◽  
Vickers Hardness ◽  
Hot Pressing ◽  
Rapid Quenching ◽  
Hardened Steel ◽  
Alloyed Powder ◽  
Ion Milling ◽  
Mechanical Grinding ◽  
Mechanically Alloyed ◽  
Steel Container

Al3Zr has the highest melting temperature (1580°C) among the tri-aluminide intermetal1ics. When prepared by casting, Al3Zr forms in the tetragonal DO23 structure but by rapid quenching or by mechanical alloying (MA) it can also be prepared in the metastable cubic L12 structure. The L12 structure can be stabilized to at least 1300°C by the addition of copper and other elements. We report a TEM study of the microstructure of bulk Al5CuZr2 prepared by hot pressing mechanically alloyed powder.MA was performed in a Spex 800 mixer using a hardened steel container and balls and adding hexane as a surfactant. Between 1.4 and 2.4 wt.% of the hexane decomposed during MA and was incorporated into the alloy. The mechanically alloyed powders were degassed in vacuum at 900°C. They were compacted in a ram press at 900°C into fully dense samples having Vickers hardness of 1025. TEM specimens were prepared by mechanical grinding followed by ion milling at 120 K. TEM was performed on a Philips CM30 at 300kV.

Effect of hot pressing on the modulated structure of Zr0.98Sn0.02TiO4

1998 ◽  
Vol 77 (4) ◽  
pp. 1033-1037 ◽  
Author(s):  
Y. Park, S. A. Song H., G. Kim
Keyword(s):  
Hot Pressing ◽  
Modulated Structure

Review of A General Theory of Crime.

1992 ◽  
Vol 37 (11) ◽  
pp. 1225-1225
Author(s):  
No authorship indicated
Keyword(s):  
General Theory ◽  
General Theory Of Crime ◽  
Theory Of Crime
Sign in / Sign up

Export Citation Format

Share Document