Properties of sintered austenitic stainless steels based on different raw materials

1991 ◽  
Vol 30 (9) ◽  
pp. 747-752 ◽  
Author(s):  
S. G. Napara-Volgina ◽  
E. V. Venglovskaya ◽  
L. N. Orlova ◽  
L. M. Apininskaya
Keyword(s):  
Stainless Steels ◽  
Raw Materials ◽  
Austenitic Stainless Steels

scholarly journals Corrosion Susceptibility and Allergy Potential of Austenitic Stainless Steels

Materials ◽  
2020 ◽  
Vol 13 (18) ◽  
pp. 4187
Author(s):  
Lucien Reclaru ◽  
Lavinia Cosmina Ardelean
Keyword(s):  
Stainless Steels ◽  
Raw Materials ◽  
Austenitic Stainless Steels ◽  
Steel Structure ◽  
Austenitic Steels ◽  
Localized Corrosion ◽  
General Corrosion ◽  
Secondary Phases ◽  
Chemical Test ◽  
Nickel Release

Although called stainless steels, austenitic steels are sensitive to localized corrosion, namely pitting, crevice, and intergranular form. Seventeen grades of steel were tested for localized corrosion. Steels were also tested in general corrosion and in galvanic couplings (steels–precious alloys) used in watchmaking applications. The evaluations have been carried out in accordance with the ASTM standards which specifically concern the forms of corrosion namely, general (B117-97, salt fog test), pitting (G48-11, FeCl3), crevice (F746-87) and intergranular (A262-15, Strauss chemical test and G108-94, Electrochemical potentiodynamic reactivation test). All tests revealed sensitivity to corrosion. We have noticed that the transverse face is clearly more sensitive than the longitudinal face, in the direction of rolling process. The same conclusion has been drawn from the tests of nickel release. It should be pointed out that, despite the fact that the grade of steel is in conformity with the classification standards, the behavior is very different from one manufacturer to another, due to parameters dependent on the production process, such as casting volume, alloying additions, and deoxidizing agents. The quantities of nickel released are related to the operations involved in the manufacturing process. Heat treatments reduce the quantities of nickel released. The surface state has little influence on the release. The hardening procedures increase the quantities of nickel released. The quantities of released nickel are influenced by the inclusionary state and the existence of the secondary phases in the steel structure. Another aspect is related to the strong dispersion of results concerning nickel release and corrosion behavior of raw materials.

Radiation Damage Studies with the HVEM

1972 ◽  
Vol 30 ◽  
pp. 680-681
Author(s):  
J. J. Laidler ◽  
B. Mastel
Keyword(s):  
Radiation Damage ◽  
Stainless Steels ◽  
Volume Expansion ◽  
Austenitic Stainless Steels ◽  
Test Facility ◽  
Fast Breeder Reactors ◽  
Breeder Reactors ◽  
Under Construction ◽  
Development Laboratory ◽  
Insight Into

One of the major materials problems encountered in the development of fast breeder reactors for commercial power generation is the phenomenon of swelling in core structural components and fuel cladding. This volume expansion, which is due to the retention of lattice vacancies by agglomeration into large polyhedral clusters (voids), may amount to ten percent or greater at goal fluences in some austenitic stainless steels. From a design standpoint, this is an undesirable situation, and it is necessary to obtain experimental confirmation that such excessive volume expansion will not occur in materials selected for core applications in the Fast Flux Test Facility, the prototypic LMFBR now under construction at the Hanford Engineering Development Laboratory (HEDL). The HEDL JEM-1000 1 MeV electron microscope is being used to provide an insight into trends of radiation damage accumulation in stainless steels, since it is possible to produce atom displacements at an accelerated rate with 1 MeV electrons, while the specimen is under continuous observation.

Strain-induced martensite effects on transgranular carbide precipitation in type 304 stainless steels

1991 ◽  
Vol 49 ◽  
pp. 604-605
Author(s):  
A.H. Advani ◽  
L.E. Murr ◽  
D. Matlock
Keyword(s):  
Heat Treatment ◽  
Grain Boundary ◽  
Stress Corrosion Cracking ◽  
Stainless Steels ◽  
Deformation Twin ◽  
Austenitic Stainless Steels ◽  
Carbide Precipitation ◽  
Strain Induced Martensite ◽  
Type 304

Thermomechanically induced strain is a key variable producing accelerated carbide precipitation, sensitization and stress corrosion cracking in austenitic stainless steels (SS). Recent work has indicated that higher levels of strain (above 20%) also produce transgranular (TG) carbide precipitation and corrosion simultaneous with the grain boundary phenomenon in 316 SS. Transgranular precipitates were noted to form primarily on deformation twin-fault planes and their intersections in 316 SS.Briant has indicated that TG precipitation in 316 SS is significantly different from 304 SS due to the formation of strain-induced martensite on 304 SS, though an understanding of the role of martensite on the process has not been developed. This study is concerned with evaluating the effects of strain and strain-induced martensite on TG carbide precipitation in 304 SS. The study was performed on samples of a 0.051%C-304 SS deformed to 33% followed by heat treatment at 670°C for 1 h.

Oxidation behavior of 26Cr-16Ni and AISI 309 austenitic stainless steels in air flow at 1,173 K

2015 ◽  
Vol 57 (7-8) ◽  
pp. 597-601 ◽  
Author(s):  
Peeraya Pipatnukun ◽  
Panyawat Wangyao ◽  
Gobboon Lothongkum
Keyword(s):  
Stainless Steels ◽  
Oxidation Behavior ◽  
Air Flow ◽  
Austenitic Stainless Steels

EPRI P87

Alloy Digest ◽  
2011 ◽  
Vol 60 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Tensile Properties ◽  
Stainless Steels ◽  
Austenitic Stainless Steels

Abstract EPRI P87 is a MMA electrode designed for dissimilation joints between austenitic stainless steels (i.e. 304H) and a creep resisting CrMo alloy (i.e. P91). This datasheet provides information on composition and tensile properties as well as fracture toughness. It also includes information on joining. Filing Code: Ni-685. Producer or source: Metrode Products Ltd.

CARPENTER STAINLESS 304+B

Alloy Digest ◽  
1961 ◽  
Vol 10 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Cross Section ◽  
Stainless Steels ◽  
Austenitic Stainless Steels ◽  
Heat Treating ◽  
Neutron Absorption ◽  
Absorption Cross ◽  
Type 304 ◽  
Conventional Type ◽  
Neutron Absorption Cross Section

Abstract Carpenter Stainless 304+B is similar to conventional Type 304 with the addition of boron to give it a much higher thermal neutron absorption cross-section than other austenitic stainless steels. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-121. Producer or source: Carpenter.

ALZ 316

Alloy Digest ◽  
1999 ◽  
Vol 48 (8) ◽  
Keyword(s):  
Mechanical Properties ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Austenitic Stainless Steel ◽  
Physical Properties ◽  
Tensile Properties ◽  
Stainless Steels ◽  
Austenitic Stainless Steels ◽  
Heat Treating

Abstract ALZ 316 is an austenitic stainless steel with good formability, corrosion resistance, toughness, and mechanical properties. It is the basic grade of the stainless steels, containing 2 to 3% molybdenum. After the 304 series, the molybdenum-containing stainless steels are the most widely used austenitic stainless steels. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-756. Producer or source: ALZ nv.

AVESTA SHEFFIELD SAF 2507

Alloy Digest ◽  
1996 ◽  
Vol 45 (9) ◽  
Keyword(s):  
High Resistance ◽  
Stainless Steels ◽  
Coefficient Of Thermal Expansion ◽  
Austenitic Stainless Steels ◽  
High Strength ◽  
Heat Treating ◽  
General Corrosion ◽  
Temperature Performance ◽  
Chloride Stress Corrosion Cracking ◽  
Very High

Abstract Avesta Sheffield SAF 2507 is an austenitic/ferritic duplex stainless steel with very high strength. The alloy has a lower coefficient of thermal expansion and a higher thermal conductivity than austenitic stainless steels. The alloy has a high resistance to pitting, crevice, and general corrosion; it has a very high resistance to chloride stress-corrosion cracking. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-652. Producer or source: Avesta Sheffield Inc.

NSSMC-NAR-SN-1, SN-3, SN-5

Alloy Digest ◽  
2016 ◽  
Vol 65 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Nitric Acid ◽  
Tensile Properties ◽  
Stainless Steels ◽  
Austenitic Stainless Steels

Abstract NSSMC-NAR-SN-1, SN-3, and SN-5 are austenitic stainless steels with corrosion resistance to nitric acid. The alloys can be abbreviated as NSSMC-NAR-SN-1: LC-17Cr-14Ni-4Si, NSSMC-NAR-SN-3: LC-11Cr-17Ni-6Si-Zr-Ti, and NSSMC-NAR-SN-5: LC-27Cr- 8Ni-Si-N. This datasheet provides information on composition, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming. Filing Code: SS-1237. Producer or source: Nippon Steel and Sumitomo Metal Corporation.

NSSMC-NAR-AC-3, AC-4

Alloy Digest ◽  
2015 ◽  
Vol 64 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Tensile Properties ◽  
Stainless Steels ◽  
Austenitic Stainless Steels ◽  
Excellent Corrosion Resistance

Abstract NSSMC-NAR-AC-3 and AC-4 are austenitic stainless steels with excellent corrosion resistance, especially to seawater. This datasheet provides information on composition, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming. Filing Code: SS-1234. Producer or source: Nippon Steel and Sumitomo Metal Corporation.

Sign in / Sign up

Export Citation Format

Share Document