Creep and stress rupture strength of 5VMTs alloy clad with VN7 alloy

1982 ◽  
Vol 14 (10) ◽  
pp. 1385-1388
Author(s):  
I. S. Tsvilyuk ◽  
V. I. Pyl'nikov
Keyword(s):  
Rupture Strength ◽  
Stress Rupture ◽  
Creep And Stress Rupture ◽  
Stress Rupture Strength ◽  
5Vmts Alloy

A method of creep and stress-rupture strength tests of tubular elements

1989 ◽  
Vol 21 (8) ◽  
pp. 1115-1119
Author(s):  
V. V. Kashelkin ◽  
Yu. I. Kozyrev ◽  
E. A. Myakotin ◽  
S. A. Shestirikov
Keyword(s):  
Rupture Strength ◽  
Stress Rupture ◽  
Creep And Stress Rupture ◽  
Stress Rupture Strength ◽  
Strength Tests

SANDVIK SANICRO 31HT

Alloy Digest ◽  
1996 ◽  
Vol 45 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Structural Stability ◽  
Rupture Strength ◽  
Stress Rupture ◽  
Heat Treating ◽  
Creep And Stress Rupture ◽  
Stress Rupture Strength

Abstract Sandvik Sanicro 31HT is an austenitic Fe-Ni-Cr alloy developed for high-temperature service. The alloy is highly resistant to oxidation and carburization, has high creep and stress-rupture strength, and possesses good structural stability. This datasheet provides information on composition and physical properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-643. Producer or source: Sandvik.

THERMO-SPAN ALLOY

Alloy Digest ◽  
1994 ◽  
Vol 43 (2) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Fatigue Resistance ◽  
Thermal Fatigue ◽  
Rupture Strength ◽  
Stress Rupture ◽  
Heat Treating ◽  
Thermal Fatigue Resistance ◽  
Stress Rupture Strength

Abstract THERMO-SPAN ALLOY is a precipitation-hardenable superalloy with a low coefficient of expansion combined with tensile and stress-rupture strength. Thermal fatigue resistance is inherent. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on forming and heat treating. Filing Code: FE-105. Producer or source: Carpenter.

scholarly journals Tensile and Stress-Rupture Behavior of Hafnium Carbide Dispersed Molybdenum and Tungsten Base Alloy Wires

1993 ◽  
Vol 322 ◽  
Author(s):  
H.M. Yun ◽  
R.H. Titran
Keyword(s):  
Strain Rate ◽  
Strain Rate Sensitivity ◽  
Rupture Strength ◽  
Base Alloy ◽  
Stress Rupture ◽  
Rate Sensitivity ◽  
Tungsten Alloy ◽  
Rate Dependency ◽  
Hafnium Carbide ◽  
Stress Rupture Strength

AbstractThe tensile strain rate sensitivity and the stress-rupture strength of Mo-base and W-base alloy wires, 380 µm in diameter, were determined over the temperature range from 1200 to 1600 K. Three molybdenum alloy wires; Mo + 1.1 wt% hafnium carbide (MoHfC), Mo + 25 wt% W + 1.1 wt% hafnium carbide (MoHfC+25W) and Mo + 45 wt% W + 1.1 wt% hafnium carbide (MoHfC+45W), and a W + 0.4 wt% hafnium carbide (WHfC) tungsten alloy wire were evaluated.The tensile strength of all wires studied was found to have a positive strain rate sensitivity. The strain rate dependency increased with increasing temperature and is associated with grain broadening of the initial fibrous structures. The hafnium carbide dispersed W-base and Mo-base alloys have superior tensile and stress-rupture properties than those without HfC. On a density compensated basis the MoHfC wires exhibit superior tensile and stress-rupture strengths to the WHfC wires up to approximately 1400 K. Addition of tungsten in the Mo-alloy wires was found to increase the long-term stress-rupture strength at temperatures above 1400 K.

Sign in / Sign up

Export Citation Format

Share Document