Quality of raw materials used in the preparation of morphine

1976 ◽  
Vol 10 (5) ◽  
pp. 627-629
Author(s):  
A. V. Gaevskii ◽  
R. M. Ivanova ◽  
P. M. Loshkarev ◽  
N. D. Matveev
Keyword(s):  
Raw Materials ◽  
Materials Used

scholarly journals Analysis of Quality of Backyard Compost and Its Potential Utilization as a Circular Bio-Waste Source

2021 ◽  
Vol 11 (10) ◽  
pp. 4392
Author(s):  
Apolka Ujj ◽  
Kinga Percsi ◽  
Andras Beres ◽  
Laszlo Aleksza ◽  
Fernanda Ramos Diaz ◽  
...  
Keyword(s):  
Crop Production ◽  
Basic Education ◽  
Raw Materials ◽  
Nutrient Content ◽  
Quality Analysis ◽  
Weed Seed ◽  
Quality Properties ◽  
Seed Dispersion ◽  
Materials Used

The use and quality analysis of household compost have become very important issues in recent years due to the increasing interest in local food production and safe, self-produced food. The phenomenon was further exacerbated by the COVID-19 pandemic quarantine period, which gave new impetus to the growth of small home gardens. However, the knowledge associated with making high-quality compost is often lacking in home gardeners. Therefore, the objective of this research was to find answers to the following questions: can the quality of backyard compost be considered safe in terms of toxicity and nutrient content? Can weed seed dispersion affect the usability of backyard compost? In general, can the circulation of organic matter be increased with the spread of home composting? In this study, 16 different house composts were analysed for stability, weed seed contamination, toxic elements, and nutrient content using analysis of variance. The results of the research showed that the quality properties of the composts (including their weed seed dispersion effect) were greatly influenced by the different techniques and raw materials used. The toxicity levels, as well as the content of macro and microelements, were within the parameters of safe-quality compost. The specific macronutrient (Ca, Mg) and micronutrient (Fe, Mn) contents of the tested composts have a similar and, in some cases, more favorable nutrient supply capacity in crop production than the frequently-used cow manure-based composts. With a plan of basic education on composting, there is potential to encourage farmyard composting.

Bioprotective Potential of Lactic Acid Bacteria in Malting and Brewing

2008 ◽  
Vol 71 (8) ◽  
pp. 1724-1733 ◽  
Author(s):  
SUSAN ROUSE ◽  
DOUWE VAN SINDEREN
Keyword(s):  
Lactic Acid ◽  
Lactic Acid Bacteria ◽  
Raw Materials ◽  
Textural Properties ◽  
Specific Reference ◽  
Brewing Industry ◽  
Beer Brewing ◽  
Brewing Process ◽  
Materials Used

Lactic acid bacteria (LAB) are naturally associated with many foods or their raw ingredients and are popularly used in food fermentation to enhance the sensory, aromatic, and textural properties of food. These microorganisms are well recognized for their biopreservative properties, which are achieved through the production of antimicrobial compounds such as lactic acid, diacetyl, bacteriocins, and other metabolites. The antifungal activity of certain LAB is less well characterized, but organic acids, as yet uncharacterized proteinaceous compounds, and cyclic dipeptides can inhibit the growth of some fungi. A variety of microbes are carried on raw materials used in beer brewing, rendering the process susceptible to contamination and often resulting in spoilage or inferior quality of the finished product. The application of antimicrobial-producing LAB at various points in the malting and brewing process could help to negate this problem, providing an added hurdle for spoilage organisms to overcome and leading to the production of a higher quality beer. This review outlines the bioprotective potential of LAB and its application with specific reference to the brewing industry.

The Issue of Increasing the Products Durability Made of Fine-Grain Concrete

2018 ◽  
Vol 931 ◽  
pp. 537-543
Author(s):  
Elizaveta O. Lotoshnikova ◽  
Leonid M. Usepyan ◽  
Valeriya N. Telegina ◽  
Elzara O. Tsybenko
Keyword(s):  
Experimental Approach ◽  
Raw Materials ◽  
Practical Implementation ◽  
Technological Method ◽  
Fine Grain ◽  
Materials Used

The article presents a technique for assigning the composition of the agglutinant sand, which is based on the calculation and experimental approach to determining the composition, taking into account the quality of raw materials used and the requirements for the properties of concrete products produced. The obtained results served as the basis for the practical implementation of the proposed technological method of increasing the small-sized products durability made of fine-grain concrete.

scholarly journals Quality and biological value of wine from gooseberries, raspberries and black currants using vegetable sweetener

2020 ◽  
Vol 81 (4) ◽  
pp. 131-137
Author(s):  
N. E. Nazarova ◽  
T. V. Zaletova ◽  
E. V. Zubova ◽  
K. A. Kulagina
Keyword(s):  
Raw Materials ◽  
Sugar Content ◽  
Control Sample ◽  
Beta Carotene ◽  
Zero Point ◽  
Regulatory Document ◽  
Calorie Content ◽  
Functional Product ◽  
Materials Used

The results of the study of the natural sweetener effect from Stevia on the quality of two types of table semisweet fruit blended wine - from gooseberries and raspberries, gooseberries and black currants - in comparison with the classical recipe with sugar, are presented in the article. The recipes and the production technology of table blended fruit wine with Stevia extract as a sweetener were presented in the work. Stevia extract and sugar (control sample) were added after complete fermentation of sugars into dry wine material. The extract dose was 1.4 ml per 1 liter of wine material. Organoleptic and tasting evaluation of the finished product showed that wine with the addition of Stevia extract has good quality indicators, a pleasant taste without extraneous smacks. The sugar content was practically at zero point - 0.25 g / l in wine from gooseberries and raspberries, 0.28 g / l in wine from gooseberries and black currants. In the wine made by classical technology, the sugar content was 70.30 g / l and 71.10 g / l, respectively. The titrated acidity of the wine was within the requirements of the regulatory document and ranged from 9.0 to 10.9 g / dm3. The content of vitamin C and beta-carotene depended to a greater extent on the type of fruit and berry raw materials used. A higher content of ascorbic acid was noted in blended wine from gooseberries and black currants - at the level of 26.88–27.02 mg, beta-carotene - in wine from gooseberries and raspberries. The introduction of sugar or Stevia extract did not affect the values of these indicators much. According to the results of studies in the manufacture of blended fruit wines in order to reduce their calorie content and use as a functional product, the addition of Stevia extract is recommended

scholarly journals Effect of washing time and storage of raw Material on Surimi and Kamaboko of Tilapia (Oreochromis sp.)

2020 ◽  
Vol 7 (3) ◽  
pp. 89
Author(s):  
Eka Saputra
Keyword(s):  
Water Content ◽  
Raw Materials ◽  
Frozen Storage ◽  
Storage Period ◽  
Raw Material ◽  
Minced Fish ◽  
Materials Used ◽  
And Storage

This study aim was to determine the effect of washing and raw materials on frozen storage on the quality of surimi and kamaboko from raw material of tilapia (Oreochromis sp). There were three types of raw materials used, namely minced fish, surimi, and surimi with addition of sorbitol, with three washing treatments and four weeks frozen storage period observed every week. The method used consisted of measurements of pH, water content, bite test, and folding test. Then the results obtained for the best kamaboko tilapia (Oreochromis sp) were obtained from fillet raw materials compared to the raw material of Minced fish and raw materials of Minced Fish + Sorbitol, with a frequency of washing once and frozen storage for 3 weeks.

Effectiveness of a Lactobacillus sakei Starter Culture in the Reduction of Biogenic Amine Accumulation as a Function of the Raw Material Quality

2001 ◽  
Vol 64 (3) ◽  
pp. 367-373 ◽  
Author(s):  
SARA BOVER-CID ◽  
MARIA IZQUIERDO-PULIDO ◽  
M. CARMEN VIDAL-CAROU
Keyword(s):  
Biogenic Amine ◽  
Dry Matter ◽  
Raw Materials ◽  
Starter Culture ◽  
Raw Material ◽  
Lactobacillus Sakei ◽  
Hygienic Quality ◽  
Fermented Sausages ◽  
Materials Used

The effectiveness of an amine-negative starter culture (Lactobacillus sakei CTC494) in the reduction of biogenic amine production during the ripening of fermented sausages was examined. Four batches were manufactured in parallel:spontaneously fermented and starter-mediated sausages were manufactured from two lots of raw materials of different hygienic quality. Besides the biogenic amine contents, changes in the microbial counts, nitrogenous fractions, pH, and water content were measured at several sampling points during the ripening process. In sausages manufactured from good quality meat, the starter strain of L. sakei reduced and even inhibited biogenic amine accumulation during sausage fermentation, the end products showing extremely low biogenic amine contents (tyramine levels less than 15 mg/kg of dry matter and putrescine and cadaverine levels less than 5 mg/kg of dry matter). Nevertheless, starter-mediated sausages made from poorer-quality raw materials showed much higher amine contents (308, 223, and 36 mg/kg of dry matter of cadaverine, tyramine, and putrescine, respectively), which were only slightly lower than those of the spontaneously fermented sausages made from the same raw materials. The relatively high bacterial numbers of raw materials of poorer-hygienic quality diminished the beneficial effect of the starter strain. Therefore, the effectiveness of the starter was strongly dependent on the hygienic quality of the raw materials used.

Impact of Raw Material Quality on Performance of Mixing and Charging Machines in Drilling and Blasting Operations

2021 ◽  
pp. 69-73
Author(s):  
T.S. Morozova
Keyword(s):  
Diesel Fuel ◽  
Raw Materials ◽  
Raw Material ◽  
Production Facility ◽  
High Quality ◽  
Equipment Failures ◽  
Hazardous Production ◽  
Materials Used ◽  
Incoming Inspection

A study into the failure causes of mixing and charging equipment confirms that the main impact on the probability of accidents is the use of raw materials that do not meet the specifications and have unstable properties. The raw materials used for explosives preparation in mechanized charging of boreholes include such components as ammonium nitrate, emulsion phase, diesel fuel, emulsifier and others. The paper describes the application of various formulations with these components in specific types of mixing and charging machines manufactured by AZOTTECH LLC. The main properties that affect the quality of raw materials are summarised, and the incoming inspection of explosive components is described as part of the acceptance procedure at temporary storage sites at a hazardous production facility. The paper describes common types of equipment failures and maintenance procedures when using substandard raw materials. The conclusion highlights the key practices to improve the equipment uptime as well as recommendations for incoming inspection and the use of high-quality explosive components.

Influence of Hygienic Quality of Raw Materials on Biogenic Amine Production during Ripening and Storage of Dry Fermented Sausages

2000 ◽  
Vol 63 (11) ◽  
pp. 1544-1550 ◽  
Author(s):  
SARA BOVER-CID ◽  
MARIA IZQUIERDO-PULIDO ◽  
M. CARMEN VIDAL-CAROU
Keyword(s):  
Biogenic Amines ◽  
Biogenic Amine ◽  
Storage Temperature ◽  
Raw Materials ◽  
Decarboxylase Activity ◽  
Hygienic Quality ◽  
Fermented Sausages ◽  
Materials Used ◽  
And Storage

The effect of the hygienic status of raw materials on biogenic amine production during ripening and storage (at 4 and 15°C) of fermented sausages was studied. Two portions of fresh lean and back fat pork were stored for 5 days at −20°C (treatment A) and at 4°C (treatment B), respectively. Raw materials of treatment A maintained their hygienic quality high and low amine content. Raw materials of treatment B showed from 1 to 3 log (CFU/g) higher microbial counts and a biogenic amine index near 50 mg/kg, indicating poorer hygienic quality. The quality of raw materials influenced the composition and the concentration of biogenic amines produced during the ripening sausages. Sausages of treatment A (A-sausages) showed a large accumulation of tyramine (up to 100 mg/kg dm) followed by putrescine and cadaverine (<15 mg/kg). In contrast, B-sausages resulted in earlier and much greater amine production, and cadaverine, tyramine, and putrescine levels were 50-, 2.6-, and 6.5-fold higher than those of A-sausages. Other biogenic amines, such as octopamine, tryptamine, phenylethylamine, and histamine were also produced in B-sausages. The higher proteolysis and the lower pH of B-sausages might have favored the decarboxylase activity of microorganisms. Biogenic amine contents of sausages during storage depended on the raw materials used and storage temperature. No significant modification on the amine contents was observed during the storage of A-sausages at either temperature. Greater changes occurred in B-sausages stored at 15°C than in those stored at 4°C. Higher temperatures favored proteolytic and decarboxylase reactions, resulting in increased amine concentrations after storage.

scholarly journals Exploring Small and Medium Scale Manufacturing Firms and Quality Management of Medicinal Material Supply in a Developing Economy: The Ghanaian Perspective

2021 ◽  
Vol 8 (1) ◽  
pp. 1-12
Author(s):  
Juliet Twumasi ◽  
Evans Kyeremeh ◽  
Benedict Owusu Yankeyera
Keyword(s):  
Herbal Medicine ◽  
Raw Materials ◽  
Raw Material ◽  
Exploratory Research ◽  
Developing Economy ◽  
Medicinal Products ◽  
Medium Scale ◽  
Material Supply ◽  
Materials Used

The quality of herbs used to make herbal medicinal products largely influences the safety and effectiveness of these herbal treatments. It is therefore important to investigate the extent to which manufacturers are ensuring the quality supply of herbal medicine used in production of herbal medicine. This study examines how small and medium scale manufacturers assure the quality and continual improvement of the raw materials (raw materials) used for production of medicinal products in a developing economy, the state of Ghana, and the methods used by the company. The study adopted exploratory research design. Using interview quide with open ended questions, data was collected from 88 respondents (small and medium scale manufacturers and their representatives). The data was analysed using NVivo 11. Findings of the study indicated that herbs were collected from the wild (forest), physical inspection of the herbs and best manufacturing practices, good relationship management or collaboration were measures used to promote quality of raw material supply. Also, proper documentation or recording of processes and quality measures do not have much attention or acceptance among Traditional Medicine Practitioners (TMPs).

scholarly journals PENENTUAN PEMILIHAN BAHAN DALAM PEMBUATAN ACUAN ALAS KAKI SECARA MANUAL

CORAK ◽  
2017 ◽  
Vol 6 (2) ◽  
Author(s):  
Abimanyu Yogadita Restu Aji
Keyword(s):  
Material Selection ◽  
Raw Materials ◽  
Research Question ◽  
Coding System ◽  
Structured Interviews ◽  
Analysis Techniques ◽  
Shoe Last ◽  
Materials Used ◽  
Collection Methods

Reference of shoe last is something quite unique. In making the reference of footwear, special raw materials are required to produce a reference with good quality. The quality of this reference is very influential on the long life of a reference. In addition, the quality of the raw materials used also affects the shape of a reference. The research question posed is what factors determine the criteria for selecting the material, in the process of making the reference of footwear by manual technique. Data collection methods generally refer to interview techniques based on the principle, namely structured interviews, semi-structured and unstructured. Data analysis techniques use a gradual coding system with a focus of attention on the factors that determine the material selection criteria in manual reference footwear generation. Keywords: Reference of footwear, manuals, material characters Acuan alas kaki merupakan sesuatu yang cukup unik. Dalam pembuatan acuan alas kaki, diperlukan bahan baku khusus agar menghasilkan acuan dengan kulitas yang baik. Kualitas acuan ini sangat berpengaruh terhadap lama pakai dari sebuah acuan. Selain itu, kualitas dari bahan baku yang digunakan juga berpengaruh terhadap bentuk dari sebuah acuan. Pertanyaan penelitian yang diajukan adalah faktor apa yang menentukan kriteria pemilihan bahan, dalam proses pembuatan acuan alas kaki dengan teknik manual. Metode pengumpulan data secara umum mengacu pada teknik wawancara berdasarkan prinsipnya, yaitu wawancara terstruktur, semi terstruktur dan tidak terstruktur. Teknik analisis data menggunakan sistem pengkodean secara bertahap dengan fokus perhatian pada faktor yang menentukan kriteria pemilihan bahan dalam pembuatan acuan alas kaki secara manual. Kata kunci : Acuan alas kaki, manual, karakter bahan

Sign in / Sign up

Export Citation Format

Share Document