Determination of the optimum temperature fields for local heating of a mildly sloping conical shell

1973 ◽  
Vol 6 (6) ◽  
pp. 759-761 ◽  
Author(s):  
Ya. I. Burak ◽  
N. N. Timoshenko
Keyword(s):  
Conical Shell ◽  
Local Heating ◽  
Temperature Fields ◽  
Optimum Temperature

INCREASING THE RESOURCE OF DIESEL CYLINDER HEADS BY IMPROVING THE TECHNOLOGY OF THEIR RESTORATION

2020 ◽  
Vol 15 (7) ◽  
pp. 950-957
Author(s):  
G.D. Mezhetskiy ◽  
◽  
V.A. Strelnikov ◽  
Keyword(s):  
Diesel Engines ◽  
Thermal Loading ◽  
Theoretical Calculations ◽  
Operating Conditions ◽  
Advanced Technology ◽  
Temperature Fields ◽  
Cylinder Block ◽  
Diesel Cylinder ◽  
Thermal Intensity

The article presents the results of studies of the thermal fatigue strength of diesel cylinder heads and their resource under operating conditions, by using the most advanced technology for their restoration. Based on the results of theoretical calculations of durability and operational studies, a restoration technology has been proposed, which makes it possible to increase the resource of cylinder heads by 2 ÷ 2.5 times. For this purpose, the non-uniformity of the temperature field on the firing bottom of the cylinder heads of YaMZ-238NB diesel engines was theoretically determined and experimentally confirmed. On the basis of theoretical calculations, the most heatstressed sections of the plane of the cylinder heads of diesel engines bonded to the cylinder block were determined, and the appearance of cracks in them. When developing a method for calculating the temperature fields of the fire bottom, the universal finite element method (FEM) was used. This method makes it possible to take into account the geometry and conditions of thermal loading of the cylinder heads quite accurately. For the determination of temperature fields, a well-founded assignment of the boundary conditions is crucial. With this in mind, a number of surfaces were determined that characterize the durability of the entire part during operation. As a result of calculations carried out on a computer, temperature fields have been obtained that make it possible to analyze the distribution of temperatures and temperature gradients at any point of the fire bottom. The highest temperatures (620...635K) are localized in the central part of the fire bottom, which is two times higher in thermal intensity than the peripheral one and confirms the appearance of cracks in these places during the operation of diesel cylinder heads.

scholarly journals Natural convection air flow in vertical upright-angled triangular cavities under realistic thermal boundary conditions

2016 ◽  
Vol 20 (5) ◽  
pp. 1407-1420 ◽  
Author(s):  
Jaime Sieres ◽  
Antonio Campo ◽  
José Martínez-Súarez
Keyword(s):  
Natural Convection ◽  
Vertical Wall ◽  
Aperture Angle ◽  
Temperature Fields ◽  
Uniform Heat Flux ◽  
Thermal Boundary Conditions ◽  
Nusselt Numbers ◽  
Horizontal Wall ◽  
Rayleigh Numbers

This paper presents an analytical and numerical computation of laminar natural convection in a collection of vertical upright-angled triangular cavities filled with air. The vertical wall is heated with a uniform heat flux; the inclined wall is cooled with a uniform temperature; while the upper horizontal wall is assumed thermally insulated. The defining aperture angle ? is located at the lower vertex between the vertical and inclined walls. The finite element method is implemented to perform the computational analysis of the conservation equations for three aperture angles ? (= 15?, 30? and 45?) and height-based modified Rayleigh numbers ranging from a low Ra = 0 (pure conduction) to a high 109. Numerical results are reported for the velocity and temperature fields as well as the Nusselt numbers at the heated vertical wall. The numerical computations are also focused on the determination of the value of the maximum or critical temperature along the hot vertical wall and its dependence with the modified Rayleigh number and the aperture angle.

scholarly journals Immobilization of Isolated Lipase From Moldy Copra(Aspergillus Oryzae)

2011 ◽  
Vol 8 (2) ◽  
pp. 896-902
Author(s):  
Seniwati Dali ◽  
A. B. D. Rauf Patong ◽  
M. Noor Jalaluddin ◽  
Pirman ◽  
Baharuddin Hamzah
Keyword(s):  
Thermal Stability ◽  
Aspergillus Oryzae ◽  
Immobilized Lipase ◽  
Optimum Temperature ◽  
Adsorption Method ◽  
Ph Optimum ◽  
Optimum Ph ◽  
Recovery Technique ◽  
Free Lipase

Enzyme immobilization is a recovery technique that has been studied in several years, using support as a media to help enzyme dissolutions to the reaction substrate. Immobilization method used in this study was adsorption method, using specific lipase fromAspergillus oryzae. Lipase was partially purified from the culture supernatant ofAspergillus oryzae. Enzyme was immobilized by adsorbed on silica gel. Studies on free and immobilized lipase systems for determination of optimum pH, optimum temperature, thermal stability and reusability were carried out. The results showed that free lipase had optimum pH 8,2 and optimum temperature 35 °C while the immobilized lipase had optimum 8,2 and optimum temperature 45 °C. The thermal stability of the immobilized lipase, relative to that of the free lipase, was markedly increased. The immobilized lipase can be reused for at least six times.

An Experimental Analysis of Misalignment Effects on Hydrodynamic Plain Journal Bearing Performances

2001 ◽  
Vol 124 (2) ◽  
pp. 313-319 ◽  
Author(s):  
J. Bouyer ◽  
M. Fillon
Keyword(s):  
Film Thickness ◽  
Journal Bearing ◽  
Hydrodynamic Pressure ◽  
Operating Conditions ◽  
Temperature Fields ◽  
Maximum Pressure ◽  
Minimum Film Thickness ◽  
Oil Flow ◽  
Hydrodynamic Effects

The present study deals with the experimental determination of the performance of a 100 mm diameter plain journal bearing submitted to a misalignment torque. Hydrodynamic pressure and temperature fields in the mid-plane of the bearing, temperatures in two axial directions, oil flow rate, and minimum film thickness, were all measured for various operating conditions and misalignment torques. Tests were carried out for rotational speeds ranging from 1500 to 4000 rpm with a maximum static load of 9000 N and a misalignment torque varying from 0 to 70 N.m. The bearing performances were greatly affected by the misalignment. The maximum pressure in the mid-plane decreased by 20 percent for the largest misalignment torque while the minimum film thickness was reduced by 80 percent. The misalignment caused more significant changes in bearing performance when the rotational speed or load was low. The hydrodynamic effects were then relatively small and the bearing offered less resistance to the misalignment.

Determination of the parameters of local heating for increasing the fatigue resistance of welded joints

1985 ◽  
Vol 17 (4) ◽  
pp. 479-483
Author(s):  
V. N. Maksimovich ◽  
A. A. Chabanenko ◽  
P. P. Mikheev ◽  
O. I. Gushcha ◽  
Yu. F. Kudryavtsev
Keyword(s):  
Fatigue Resistance ◽  
Welded Joints ◽  
Local Heating
Sign in / Sign up

Export Citation Format

Share Document