Modified dilatometric technique for determining the austenitizing kinetics of a low alloy Mn-Mo-Ni pressure-vessel steel

1992 ◽  
Vol 27 (23) ◽  
pp. 6331-6334 ◽  
Author(s):  
P. G. H. Pistorius ◽  
G. T. Van Rooyen
Keyword(s):  
Pressure Vessel ◽  
Pressure Vessel Steel ◽  
Vessel Steel ◽  
Kinetics Of

The Consequences of Macroscopic Segregation on the Transformation Behavior of a Pressure-Vessel Steel

2014 ◽  
Vol 136 (3) ◽  
Author(s):  
E. J. Pickering ◽  
H. K. D. H. Bhadeshia
Keyword(s):  
Mechanical Properties ◽  
Pressure Vessel ◽  
Large Scale ◽  
Pressure Vessels ◽  
Pressure Vessel Steel ◽  
Vessel Steel ◽  
Chemical Segregation ◽  
Compositional Variations ◽  
Grade 3 ◽  
Kinetics Of

It is important that the material used to produce high-integrity pressure vessels has homogeneous properties which are reproducible and within specification. Most heavy pressure vessels comprise large forgings derived from ingots, and are consequently affected by the chemical segregation that occurs during ingot casting. Of particular concern are the compositional variations that arise from macrosegregation, such as the channels of enriched material commonly referred to as A-segregates. By causing corresponding variations in microstructure, the segregation may be detrimental to mechanical properties. It also cannot be removed by any practically feasible heat treatments because of the large scale on which it forms. Here we describe an investigation on the consequences of macrosegregation on the development of microstructure in a pressure-vessel steel, SA508 Grade 3. It is demonstrated that the kinetics of transformation are sensitive to the segregation, resulting in a dramatic spatial variations in microstructure. It is likely therefore that some of the scatter in mechanical properties as observed for such pressure vessels can be attributed to macroscopic casting-induced chemical segregation.

The Consequences of Macroscopic Segregation on the Transformation Behaviour of a Pressure-Vessel Steel

2013 ◽  
Author(s):  
Ed Pickering ◽  
Harry Bhadeshia
Keyword(s):  
Mechanical Properties ◽  
Pressure Vessel ◽  
Pressure Vessels ◽  
Pressure Vessel Steel ◽  
Vessel Steel ◽  
Chemical Segregation ◽  
High Integrity ◽  
Compositional Variations ◽  
Grade 3 ◽  
Kinetics Of

It is important that the material used to produce high-integrity pressure vessels has homogeneous properties which are reproducible and within specification. Most heavy pressure vessels comprise large forgings derived from ingots, and are consequently affected by the chemical segregation that occurs during ingot casting. Of particular concern are the compositional variations that arise from macrosegregation, such as the channels of enriched material commonly referred to as A-segregates. By causing corresponding variations in microstructure, the segregation may be detrimental to mechanical properties. Given the scale of the pressure vessel casting, the segregation cannot be removed by practically feasible heat treatments. Here we describe an investigation on the consequences of macrosegregation on the development of microstructure in a pressure-vessel steel, SA508 Grade 3. It is demonstrated that the kinetics of transformation are sensitive to the segregation, resulting in a dramatic spatial variations in microstructure. It is likely therefore that some of the scatter in mechanical properties as observed for such pressure vessels can be attributed to macroscopic casting-induced chemical segregation.

Dislocation structures in 16MND5 pressure vessel steel strained in uniaxial tension at −196°C

2005 ◽  
Vol 96 (8) ◽  
pp. 909-912
Author(s):  
Karel Obrtlík ◽  
Christian Robertson ◽  
Bernard Marini
Keyword(s):  
Uniaxial Tension ◽  
Pressure Vessel ◽  
Pressure Vessel Steel ◽  
Vessel Steel

scholarly journals Micromagnetic Characterization of Operation-Induced Damage in Charpy Specimens of RPV Steels

2021 ◽  
Vol 11 (7) ◽  
pp. 2917
Author(s):  
Madalina Rabung ◽  
Melanie Kopp ◽  
Antal Gasparics ◽  
Gábor Vértesy ◽  
Ildikó Szenthe ◽  
...  
Keyword(s):  
Neutron Irradiation ◽  
Pressure Vessel ◽  
Operating Conditions ◽  
Magnetic Characteristics ◽  
Pressure Vessel Steel ◽  
Training Procedure ◽  
Vessel Steel ◽  
Before And After ◽  
The Individual ◽  
Magnetic Adaptive Testing

The embrittlement of two types of nuclear pressure vessel steel, 15Kh2NMFA and A508 Cl.2, was studied using two different methods of magnetic nondestructive testing: micromagnetic multiparameter microstructure and stress analysis (3MA-X8) and magnetic adaptive testing (MAT). The microstructure and mechanical properties of reactor pressure vessel (RPV) materials are modified due to neutron irradiation; this material degradation can be characterized using magnetic methods. For the first time, the progressive change in material properties due to neutron irradiation was investigated on the same specimens, before and after neutron irradiation. A correlation was found between magnetic characteristics and neutron-irradiation-induced damage, regardless of the type of material or the applied measurement technique. The results of the individual micromagnetic measurements proved their suitability for characterizing the degradation of RPV steel caused by simulated operating conditions. A calibration/training procedure was applied on the merged outcome of both testing methods, producing excellent results in predicting transition temperature, yield strength, and mechanical hardness for both materials.

Sign in / Sign up

Export Citation Format

Share Document