Effect of the fractional composition of alkali cellulose on the quality of technical yarn

1987 ◽  
Vol 19 (2) ◽  
pp. 90-93
Author(s):  
L. G. Vedernikova ◽  
S. A. Mikhailova ◽  
L. G. Khizhnyak ◽  
M. I. Zyuzina ◽  
Yu. V. Lotoshnikova
Author(s):  
A. G. Mirgorodskaya ◽  
M. V. Shkidyuk ◽  
N. N. Matyukhina ◽  
T. A. Don

The problem of utilization or recycling industrial tobacco wastes is an important problem for tobacco industry. Economically preferable way for utilizing industrial tobacco wastes (tobacco scrap) is production smokeless products and hookah blends as wastes are utilized without special treatment. Monitoring of humidity and fractional composition of cut tobacco taken from tobacco rod/cigarette spoilage (tobacco scrap) is carried. Its long-term storage leads to increasing scrap and dust quantity. Researches on utilizing tobacco scrap for sniff and hookah blend production, which are considered to be less harmful compared to cigarettes, were carried. Chemical composition of American type tobacco and scrap was defined. Nicotine content varies from 0.9 to 2.4% and carbohydrates content – from 5.6 to 9.6%. Experimental samples of hookah blend were produced and their organoleptic and taste evaluation were carried. It was found that utilization of tobacco scrap is economically efficient for hookah blend production, as quality of final product made of leaf tobacco and tobacco scrap is similar. Experimental samples of sniff tobacco were produced in order to discover possibility of utilization industrial tobacco scrap for manufacturing this product. Consumer’s properties of sniff tobacco were evaluated by 100 points tasting protocol. This technology for sniff tobacco production from tobacco scrap allows manufacturing product of good quality, decreasing technological operations, rejecting stages of tobacco selection and its cutting and as the result decreasing cost of final product. The results of the research on utilizing tobacco scrap for hookah blend and sniff tobacco production proves optimality of recycling the tobacco wastes.


2021 ◽  
pp. 49-54
Author(s):  
V.Kh. Nurullayev ◽  
◽  
Kh.G. Ismayilova ◽  
L.M. Shikhiyeva ◽  
◽  
...  

The paper presents up-to-date and perspective requirements for the quality of diesel fuels. The effect of chemical, as well as fractional composition on the quality of diesel fuels is marked. The capability of obtaining prospective ecologically friendly diesel fuel based on the mixture of Azerbaijani oils via hydro-treatment in the presence of the catalyst of alumonickelmolibdene is noted. Ecologically friendly diesel fuels with ASTMD 4294 by sulfur - 0.039 % mass, ASTMD 3227 by sour sulfur - 0.006 % mass, ASTMD 5708 by metals: V ˃ 2 mg/kg, Ni ˃ 1 mg/kg, Fe ˃ 3 mg/kg, Na ˃ 8 mg/kg, as well as with the freezing temperature of ASTMD 97 – 50 оС have been obtained. Such kinds of diesel fuel meet EN standards and provide environmental safety in storage and transportation to the European countries. The prospect of obtaining and using buffer plug (mixture of petroleum products) during consistent pumping of various sorts of oil products without ecologic-economic risks of jet fuels is shown as well.


Author(s):  
Ю. В. Харченко ◽  
Л. Я. Харченко ◽  
С. М. Тимчук ◽  
В. В. Поздняков ◽  
О. Г. Супрун

Встановлено широку мінливість ліній – носіїв різнихендоспермових мутацій – за зерновою продуктивністю,вмістом і фракційним складом крохмалю, а такожвмістом та жирнокислотним складом олії. Показа-но, що поліпшення кукурудзи за цими показникамипотребує використання широкого генетичного різ-номаніття культури і створення якісного вихідногоматеріалу. Визначено ефекти комбінаційної здатно-сті ліній – носіїв мутацій wx, su2, ae, su1 та sh2 – зацими ознаками. Виділено перспективний вихіднийматеріал для селекції кукурудзи харчового й техніч-ного призначення. The wide variability of the maize inbreeds – carriers of different endospermic mutations for the grain productivity, content and fractional composition of starch as well as the content of oil and oleic acid glycosides were established. It is shown that the improvement of maize for these indicators requires the use of a wide genetic diversity of crops and quality of the source material. It have been determined the effects of combining ability of the inbreeds – carriers of mutations wx, su2,ae, su1 and sh2 for these traits. The perspective initial material for the maize breeding of food and technical application was identified.


Author(s):  
Є. Я. Прасолов ◽  
С. А. Бєловол ◽  
Б. С. Черненко ◽  
А. В. Ужищенко ◽  
А. В. Шеметюк

Представлено результати розробки безприводного ротаційного органу адаптера до сівалки просапних культур. Проведено аналіз робочих органів ґрунтообробних машин; обґрунтовано ґрунтообробний адаптер; визначено кути афронтальності й нахилу дискового  органу; проведено порівняльну оцінку показників твердості ґрунту; визначено раціональні параметри і режими роботи робочого органу; визначено фракційний склад ґрунту та розпушення робочим органом; проведено  дослідження з визначення раціонального кута φ робочого органу; встановлено поздовжній профіль насіннєвого ложа; виконано співвідношення ширини і глибини обробленої смуги; визначено коефіцієнти к1 і к2  у формулі тягового опору безприводного ротаційного органу. Для  підвищення якості передпосівного обробітку ґрунту запропоновано адаптер із безприводним ротаційним органом до сівалок, який складається з поперечної балки рами, на якій розташовані секції безприводного ротаційного органу. Для копіювання профілю поля кожна секція забезпечена паралелограмною підвіскою і підпружиненою штангою. Крім поперечної балки  рама адаптера складається з двох автозчіпок, які слугують для агрегатування з трактором, а автозчеплення з сівалкою, пов'язаних між собою поздовжніми балками.  Проведено випробування результатів науково-дослідної роботи, яким підтверджено ефективність та доцільність для використання у господарстві ПП Агрофірма «Анастасія» Глобинського району Полтавської області. The article presents the results of the development of a non-rotating rotational organ of the soil-working adapter to a seed drill of cultivating crops. The analysis of working bodies of soil-working machines was carried out; the constructive-technological scheme of the soil-working adapter is substantiated; defined angles of inclination and inclination of the disc body; comparative estimation of soil hardness indexes; defined rational parameters and operating modes of the working body; determined fractional composition of soil and loosening by the working body;  researches have been conducted to determine the rational angle φ of the working organ; the longitudinal profile of the seed bed is established; the ratio of the width and depth of the treated strip is executed; the coefficients k1 and k2 in the formula of the traction resistance of the non-driven rotational body are determined. To improve the quality of pre-sowing soil cultivation, an adapter with a rotary rotary device to the seeders is proposed. It consists of a transverse beam of a frame, on which, with the help of brackets, there are sections of a non-rotating rotary body. To improve the quality of pre-sowing soil cultivation, an adapter with a rotary device to the seeders is offered. It consists of a transverse beam of a frame, on which, with the help of brackets, there are sections of a non-rotating rotary body. To copy the field profile, each section is provided with a parallelogram suspension and a spring-loaded rod. In addition to the transverse beam of the adapter frame consists of two auto-scraps, which serve for aggregating with the tractor, and auto-coupling with a drill, connected by a longitudinal beam. The testing of research results has been carried out, which confirms the efficiency and expediency for use in the farm of the PP agricultural firm «Anastasia» in Globyno district, Poltava region.


Author(s):  
С. О. Шаповалов ◽  
Камиль Аль-Бази Мезхер

Викладені матеріали з вивчення білковості та сиро-придатності молока, отриманого від корів трьохпорід: симентальської, червоно-рябої та чорно-рябої.До завдань досліджень входило визначення фракцій-ного (за масовою часткою казеїну та його фракцій,альбуміну та глобулінів) і амінокислотного складубілків (співвідношення незамінних і замінних аміноки-слот, їх скори, визначення лімітуючих амінокислотбілка молока кожної з порід), швидкості згортаннята якості згустку молока, одержаного під дієюсичужного ферменту. The article describes the materials of study of protein andcheese making quality of milk from cows of three breeds:Simmental, Red and White and Black and White. The tasks ofthe research was to determine the fractional composition (massfraction of casein and its fractions, albumin and globulin) andamino-acid composition of proteins (the ratio of essential andnonessential amino acids, their scores, the definition of limitingamino acids in the protein of milk of each breed), the rate ofcoagulation and quality of milk clot formed under the action ofrennet.


2018 ◽  
Vol 6 (0) ◽  
pp. 148-158
Author(s):  
A. A. Lysenko ◽  
I. V. Pravdziva ◽  
A. A. Siroshtan ◽  
N. V. Vasylenko

2020 ◽  
Vol 329 ◽  
pp. 02013
Author(s):  
E.V. Ageev ◽  
N.M. Harakova ◽  
S.V Pikalov ◽  
M.S Korolev ◽  
V.O Podanov

The article presents the results of experimental research aimed at studying the fractional composition of electroerosive powder materials of the tungsten nickel iron alloy obtained in lighting kerosene. It has been found that more than half of the total number of particles is particles with a size of less than 47.7 microns. It was also noted that particles with a size less than or equal to 29.37 microns in the powder include 20.0% of the total volume. The conducted research makes it possible to determine the most relevant field of application of the obtained powder materials and will improve the quality of scientific and technical developments in the field of application of electroerosive powder materials.


1990 ◽  
Vol 21 (5) ◽  
pp. 446-448
Author(s):  
F. I. Vavilova ◽  
�. M. Mirzoev ◽  
N. M. Borel
Keyword(s):  

1990 ◽  
Vol 21 (4) ◽  
pp. 327-328
Author(s):  
K. A. Malyshevskaya ◽  
O. P. Laletina ◽  
N. A. Mazur ◽  
I. V. Afanas'ev

Sign in / Sign up

Export Citation Format

Share Document