Surface characterization of the polypropylene matrix used in composites

1994 ◽  
Vol 13 (7) ◽  
pp. 535-537
Author(s):  
M. C. Bautista ◽  
J. Rubio ◽  
J. L. Oteo
Keyword(s):  
Surface Characterization ◽  
Polypropylene Matrix

The Use of Advanced Analytical Techniques for Characterization of the Chemical, Physical, and Crystallographic Nature of a Surface

1973 ◽  
Vol 31 ◽  
pp. 132-133 ◽  
Author(s):  
R. E. Herfert
Keyword(s):  
Surface Characterization ◽  
Analytical Techniques ◽  
X Ray Diffraction ◽  
Depth Of Penetration ◽  
X Ray ◽  
The Past ◽  
Transmission Electron ◽  
Scanning Electron

Studies of the nature of a surface, either metallic or nonmetallic, in the past, have been limited to the instrumentation available for these measurements. In the past, optical microscopy, replica transmission electron microscopy, electron or X-ray diffraction and optical or X-ray spectroscopy have provided the means of surface characterization. Actually, some of these techniques are not purely surface; the depth of penetration may be a few thousands of an inch. Within the last five years, instrumentation has been made available which now makes it practical for use to study the outer few 100A of layers and characterize it completely from a chemical, physical, and crystallographic standpoint. The scanning electron microscope (SEM) provides a means of viewing the surface of a material in situ to magnifications as high as 250,000X.

Surface Characterization of Functionalized Imidazolium-Based Ionic Liquids

Langmuir ◽  
2008 ◽  
Vol 24 (17) ◽  
pp. 9500-9507 ◽  
Author(s):  
Claudia Kolbeck ◽  
Manuela Killian ◽  
Florian Maier ◽  
Natalia Paape ◽  
Peter Wasserscheid ◽  
...  
Keyword(s):  
Ionic Liquids ◽  
Surface Characterization

scholarly journals Characterization of Steel Slag Filler and Its Effect on Aging Resistance of Asphalt Mastic with Various Aging Methods

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 869
Author(s):  
Minghua Wei ◽  
Shaopeng Wu ◽  
Haiqin Xu ◽  
Hechuan Li ◽  
Chao Yang
Keyword(s):  
Particle Size ◽  
Surface Characterization ◽  
Steel Slag ◽  
Self Healing ◽  
Limestone Filler ◽  
Asphalt Mastic ◽  
Pore Characterization ◽  
Asphalt Mastics ◽  
Healing Property

Steel slag is the by-product of the steelmaking industry, the negative influences of which prompt more investigation into the recycling methods of steel slag. The purpose of this study is to characterize steel slag filler and study its feasibility of replacing limestone filler in asphalt concrete by evaluating the resistance of asphalt mastic under various aging methods. Firstly, steel slag filler, limestone filler, virgin asphalt, steel slag filler asphalt mastic and limestone filler asphalt mastic were prepared. Subsequently, particle size distribution, surface characterization and pore characterization of the fillers were evaluated. Finally, rheological property, self-healing property and chemical functional groups of the asphalt mastics with various aging methods were tested via dynamic shear rheometer and Fourier transform infrared spectrometer. The results show that there are similar particle size distributions, however, different surface characterization and pore characterization in the fillers. The analysis to asphalt mastics demonstrates how the addition of steel slag filler contributes to the resistance of asphalt mastic under the environment of acid and alkaline but is harmful under UV radiation especially. In addition, the pore structure in steel slag filler should be a potential explanation for the changing resistance of the asphalt mastics. In conclusion, steel slag filler is suggested to replace limestone filler under the environment of acid and alkaline, and environmental factor should be taken into consideration when steel slag filler is applied to replace natural fillers in asphalt mastic.

scholarly journals Compositional, structural, and surface characterization of heat-treated halloysite samples: Influence of surface treatment on photochemical activity

2021 ◽  
Vol 212 ◽  
pp. 106222
Author(s):  
Balázs Zsirka ◽  
Veronika Vágvölgyi ◽  
Katalin Győrfi ◽  
Erzsébet Horváth ◽  
Róbert K. Szilágyi ◽  
...  
Keyword(s):  
Surface Treatment ◽  
Surface Characterization ◽  
Photochemical Activity ◽  
Heat Treated

Surface Characterization of Composite Catalysts Prepared by Sol‐Gel Route

2021 ◽  
Vol 395 (1) ◽  
pp. 2000197
Author(s):  
Michelina Catauro ◽  
Ignazio Blanco ◽  
Daniele Naviglio ◽  
Giovanni Dal Poggetto
Keyword(s):  
Surface Characterization ◽  
Sol Gel ◽  
Composite Catalysts

scholarly journals Post-Processing and Surface Characterization of Additively Manufactured Stainless Steel 316L Lattice: Implications for BioMedical Use

Materials ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1376
Author(s):  
Alex Quok An Teo ◽  
Lina Yan ◽  
Akshay Chaudhari ◽  
Gavin Kane O’Neill
Keyword(s):  
Surface Roughness ◽  
Stainless Steel ◽  
Surface Characterization ◽  
High Surface ◽  
Surface Characteristics ◽  
Post Processing ◽  
Stainless Steel 316L ◽  
Processing Methods ◽  
Particulate Debris

Additive manufacturing of stainless steel is becoming increasingly accessible, allowing for the customisation of structure and surface characteristics; there is little guidance for the post-processing of these metals. We carried out this study to ascertain the effects of various combinations of post-processing methods on the surface of an additively manufactured stainless steel 316L lattice. We also characterized the nature of residual surface particles found after these processes via energy-dispersive X-ray spectroscopy. Finally, we measured the surface roughness of the post-processing lattices via digital microscopy. The native lattices had a predictably high surface roughness from partially molten particles. Sandblasting effectively removed this but damaged the surface, introducing a peel-off layer, as well as leaving surface residue from the glass beads used. The addition of either abrasive polishing or electropolishing removed the peel-off layer but introduced other surface deficiencies making it more susceptible to corrosion. Finally, when electropolishing was performed after the above processes, there was a significant reduction in residual surface particles. The constitution of the particulate debris as well as the lattice surface roughness following each post-processing method varied, with potential implications for clinical use. The work provides a good base for future development of post-processing methods for additively manufactured stainless steel.

Surface characterization of pharmaceutical solids

2021 ◽  
Vol 138 ◽  
pp. 116228
Author(s):  
Amanpreet Kaur ◽  
Dnyaneshwar P. Kale ◽  
Arvind K. Bansal
Keyword(s):  
Surface Characterization ◽  
Pharmaceutical Solids
Sign in / Sign up

Export Citation Format

Share Document